American Journal of Electrical Power and Energy Systems

| Peer-Reviewed |

Micro Network Protection by Synchronous Generators by the Use of Fault Current Limiter

Received: 20 April 2016    Accepted: 03 May 2016    Published: 14 May 2016
Views:       Downloads:

Share This Article

Abstract

Micro protection is one of the challenges ahead of micro network expansion. Micro network functions in two states of connection to network and island. The short connection level of micro network is different at two functional levels. Therefore, the protection system which needs to diagnose the faults at two states would function improperly. In the preset article fault current limiter and oriented over-current relays optimal adjustment are implemented for micro network protection under the study. Additive particles optimal algorithm is used to adjust relays and fault current limiter impedance. The results show that by this method the micro networks can be secured at both two modes of functions.

DOI 10.11648/j.epes.20160502.12
Published in American Journal of Electrical Power and Energy Systems (Volume 5, Issue 2, March 2016)
Page(s) 17-21
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Micro Network, Protection Coordination, Over-Current Relays, Particles Optimal Algorithm

References
[1] A. Chowdhury and D. Koval, Power Distribution System Reliability: Practical Methods and Applications. Hoboken, NJ: Wiley-IEEE, Mar. 2009.
[2] B. Hussain, S. Sharkh, and S. Hussain, “Impact studies of distributed generationon power quality and protection setup of an existing distribution network,” in Proc. Int. SPEEDAM, 2010, pp. 1243–1246.
[3] N. Nimpitiwan, G. T. Heydt, R. Ayyanar, and S. Suryanarayanan, “Fault current contribution from synchronous machine and inverter based distributed generators,” IEEE Trans. Power Del., vol. 22, no. 1, pp. 634–641, Jan. 2007.
[4] P. Bedekar, S. Bhide, and V. Kale, “Optimum coordination of over current relays in distribution system using dual simplex method,” in Proc. 2ndICETET, Dec. 2009, pp. 555–559.
[5] M. Mansour, S. Mekhamer, and N.-S. El-Kharbawe, “A modified particle swarm optimizer for the coordination of directional overcurrent relays,” IEEE Trans. Power Del., vol. 22, no. 3, pp. 1400–1410, Jul. 2007.
[6] P. Bedekar, S. Bhide, and V. Kale, “Optimum coordination of overcurrent relays in distribution system using genetic algorithm,” in Proc. ICPS, 2009, pp. 1–6.
[7] P. P. Bedekar and S. R. Bhide, “Optimum coordination of directional overcurrent relays using the hybrid GA-NLP approach,” IEEE Trans. Power Del., vol. 26, no. 1, pp. 109–119, Jan. 2011.
[8] C. So and K. Li, “Time coordination method for power system protection by evolutionary algorithm,” IEEE Trans. Ind. Appl., vol. 36, no. 5,pp. 1235–1240, Sep./Oct. 2000.
[9] M. Barzegari, S. Bathaee, and M. Alizadeh, “Optimal coordination of directional overcurrent relays using harmony search algorithm,” in Proc. 9th Int. Conf. EEEIC, May 2010, pp. 321–324.
[10] H. Sharifian, H. Askarian Abyaneh, S. Salman, R. Mohammadi, and F. Razavi, “Determination of the minimum break point set using expert system and genetic algorithm,” IEEE Trans. Power Del., vol. 25, no. 3, pp. 1284–1295, Jul. 2010.
[11] Q. Yue, F. Lu, W. Yu, and J. Wang, “A novel algorithm to determine minimum break point set for optimum cooperation of directional protection relays in multiloop networks,” IEEE Trans. Power Del., vol. 21, no. 3,pp. 1114–1119, Jul. 2006.
[12] A. Noghabi, J. Sadeh, and H. Mashhadi, “Considering different network topologies in optimal overcurrent relay coordination using a hybrid GA,” IEEE Trans. Power Del., vol. 24, no. 4, pp. 1857–1863, Oct. 2009.
[13] A. Noghabi, H. Mashhadi, and J. Sadeh, “Optimal coordination of directionalovercurrent relays considering different network topologies using interval linear programming,” IEEE Trans. Power Del., vol. 25, no. 3, pp. 1348–1354, Jul. 2010.
[14] P. Barker and R. De Mello, “Determining the impact of distributed generationon power systems. I. Radial distribution systems,” in Proc. IEEE Power Eng. Soc. Summer Meeting, 2000, pp. 1645–1656.
[15] A. Girgis and S. Brahma, “Effect of distributed generation on protective device coordination in distribution system,” in Proc. LESCOPE, 2001, pp. 115–119.
[16] W. El-Khattam and T. Sidhu, “Restoration of directional overcurrent relay coordination in distributed generation systems utilizing faultcurrent limiter,” IEEE Trans. Power Del., vol. 23, no. 2, pp. 576–585, Apr. 2008.
Author Information
  • Department of Electrical Engineering, Shabestar Branch, Islamic Azad University, Shabestar, Iran

  • Department of Electrical Engineering, Shabestar Branch, Islamic Azad University, Shabestar, Iran

  • Department of Electrical Engineering, Shabestar Branch, Islamic Azad University, Shabestar, Iran

Cite This Article
  • APA Style

    J. Beiza, H. Mohebalizadeh, A. Kh. Hamidi. (2016). Micro Network Protection by Synchronous Generators by the Use of Fault Current Limiter. American Journal of Electrical Power and Energy Systems, 5(2), 17-21. https://doi.org/10.11648/j.epes.20160502.12

    Copy | Download

    ACS Style

    J. Beiza; H. Mohebalizadeh; A. Kh. Hamidi. Micro Network Protection by Synchronous Generators by the Use of Fault Current Limiter. Am. J. Electr. Power Energy Syst. 2016, 5(2), 17-21. doi: 10.11648/j.epes.20160502.12

    Copy | Download

    AMA Style

    J. Beiza, H. Mohebalizadeh, A. Kh. Hamidi. Micro Network Protection by Synchronous Generators by the Use of Fault Current Limiter. Am J Electr Power Energy Syst. 2016;5(2):17-21. doi: 10.11648/j.epes.20160502.12

    Copy | Download

  • @article{10.11648/j.epes.20160502.12,
      author = {J. Beiza and H. Mohebalizadeh and A. Kh. Hamidi},
      title = {Micro Network Protection by Synchronous Generators by the Use of Fault Current Limiter},
      journal = {American Journal of Electrical Power and Energy Systems},
      volume = {5},
      number = {2},
      pages = {17-21},
      doi = {10.11648/j.epes.20160502.12},
      url = {https://doi.org/10.11648/j.epes.20160502.12},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.epes.20160502.12},
      abstract = {Micro protection is one of the challenges ahead of micro network expansion. Micro network functions in two states of connection to network and island. The short connection level of micro network is different at two functional levels. Therefore, the protection system which needs to diagnose the faults at two states would function improperly. In the preset article fault current limiter and oriented over-current relays optimal adjustment are implemented for micro network protection under the study. Additive particles optimal algorithm is used to adjust relays and fault current limiter impedance. The results show that by this method the micro networks can be secured at both two modes of functions.},
     year = {2016}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Micro Network Protection by Synchronous Generators by the Use of Fault Current Limiter
    AU  - J. Beiza
    AU  - H. Mohebalizadeh
    AU  - A. Kh. Hamidi
    Y1  - 2016/05/14
    PY  - 2016
    N1  - https://doi.org/10.11648/j.epes.20160502.12
    DO  - 10.11648/j.epes.20160502.12
    T2  - American Journal of Electrical Power and Energy Systems
    JF  - American Journal of Electrical Power and Energy Systems
    JO  - American Journal of Electrical Power and Energy Systems
    SP  - 17
    EP  - 21
    PB  - Science Publishing Group
    SN  - 2326-9200
    UR  - https://doi.org/10.11648/j.epes.20160502.12
    AB  - Micro protection is one of the challenges ahead of micro network expansion. Micro network functions in two states of connection to network and island. The short connection level of micro network is different at two functional levels. Therefore, the protection system which needs to diagnose the faults at two states would function improperly. In the preset article fault current limiter and oriented over-current relays optimal adjustment are implemented for micro network protection under the study. Additive particles optimal algorithm is used to adjust relays and fault current limiter impedance. The results show that by this method the micro networks can be secured at both two modes of functions.
    VL  - 5
    IS  - 2
    ER  - 

    Copy | Download

  • Sections