Energy Saving Lamps as Sources of Harmonic Currents
American Journal of Electrical Power and Energy Systems
Volume 4, Issue 6-1, December 2015, Pages: 13-18
Received: Sep. 11, 2015; Accepted: Sep. 11, 2015; Published: Sep. 29, 2015
Views 3043      Downloads 91
Authors
Zahari Ivanov, Department of Electrical Supply, Electrical Equipment and Electrical Transport, Faculty of Electrical Engineering, Technical University - Sofia, Sofia, Bulgaria
Hristo Antchev, Power Electronics Department, Faculty of Electronic Engineering and Technologies, Technical University - Sofia, Sofia, Bulgaria
Article Tools
Follow on us
Abstract
This paper presents the results from the research of the indexes in regard to the power supply network, when a change is applied to the power supply tension of the Compact Fluorescent Lamps and LED Lamps with power up to 30W of different manufacturers. Comparision data is presented for the power factor, the displacement factor and the total harmonic distortion of the current, and the relevant conclusions have been made.
Keywords
Compact Fluoroscent Lamps, Light-Emitting Diodes, Harmonic Distortion
To cite this article
Zahari Ivanov, Hristo Antchev, Energy Saving Lamps as Sources of Harmonic Currents, American Journal of Electrical Power and Energy Systems. Special Issue: Improvement of Energy Efficiency in the Conversion of Electrical Energy by Means of Electronic Converters. Vol. 4, No. 6-1, 2015, pp. 13-18. doi: 10.11648/j.epes.s.2015040601.13
References
[1]
Nassar A., M.Mednik, “Introductory physics of harmonic distortion in fluorescent lamps”, American Journal of Physic., Vol.71, No6, pp.577-579, June, 2003.
[2]
George V., Bagaria A., Rampattiwar S. R., “Comparision of CFL and LED lamps – harmonic disturbances, economics (cost and power quality), and maximum possible loading in a power system”, International Conference and Utility Exhibition, 2011, pp.1-5.
[3]
Dolara A., S.Leva, “Power Quality and Harmonic Analysis of End User Devices”, Energies, No 5, 2012, pp.5453-5466, ISSN 1996-1073.
[4]
F. V. Topalis F. V., I. F Gonos, M. B. Kostic, “Effects of changing line voltage on the harmonic current of compact fluorescent lamps”, Proceedings of the IASTED International Conference Power and Energy Systems, November 8-10, Las Vegas, USA, pp.1-4.,1999.
[5]
F. V. Topalis F. V., I. F Gonos, M. G.A.Vokas,” Arbitrary wavwform generator for harmonic distortion tests on compact fluorescent lamps, Measurement, Elsevier, no.30, pp.257-267, 2001.
[6]
Islam M. S., Chowdhury N. A. Sakil A. K., Khandakar A., “Power Quality Effect of using Incandescent, Fluorescent CFL and LED Lamps”, First Workshop on Smart Grid and Renewable Energy, Qatar, 2015, pp.1-5.
[7]
Moulahoum S., Houassine H., N. Kabahe, “Shunt Active Power Filter to Mitigate Harmonics Generated by Compact fluorescent lights ”, 18th International Conference of Methods and Models in Automation and Robotics, 2013, pp.496-501.
[8]
Chun C., H.L.Cheng, T.Y. Chung, “A Novel Single-State High-Power-Factor LED Street-Lighting Driver With Coupled Inductors” IEEE Transactions on Industry Applications, Vol.50, Issue 5, 2014, pp.3037-3045.
[9]
Lam J. C. W., Shangzhi P., Jain P. K., “A Single-Switch Valley-Fill Power –Factor-Corrected Electronic Ballast for Compact Fluorescent Lightings With Improved Lap Current Crest Factor”, IEEE Transactions on Industrial Electronics, Vol.61, Issue 9, 2014, pp.4654-4664.
[10]
IEC 6100-3-2, Electromagnetic compatibility (EMC), Part3: Limits-Section 2: Limits for harmonic current emissions (equipment current < 16A per phase).
[11]
European Power Supply Manufacturers Association, Harmonic Current Emissions, Guidelines to the Standart EN 6100-3-2, Revision data 2010-11-08.
[12]
IEC 60969, Self-ballasted compact fluorescent lamps for general lighting services – performance requirements.
ADDRESS
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
U.S.A.
Tel: (001)347-983-5186