Adaptation of the Submerged Pumps Intended for the Irrigation in the Arid Regions
Journal of Water Resources and Ocean Science
Volume 3, Issue 2, April 2014, Pages: 17-21
Received: Apr. 28, 2014; Accepted: May 21, 2014; Published: May 30, 2014
Views 2483      Downloads 113
Authors
CHEBIHI Lakhdar, Laboratory of Mobilization and valorization of the water resources Ecole Nationale Supérieure de l’Hydraulique, RN n 29, BP 31, Soumaâ, Blida 09000, Algeria
KHODJET KESBA Omar, Laboratory of Mobilization and valorization of the water resources Ecole Nationale Supérieure de l’Hydraulique, RN n 29, BP 31, Soumaâ, Blida 09000, Algeria
Article Tools
Follow on us
Abstract
The first area of work is to study only submersible pumps PUVAL "Pumps Valves" of Berrouaghia. While tracing the effects of abrasion on submersible pumps installed in the shelters in drilling and suffered the consequences are for irrigation in arid areas. The second line stain work to answer the following position: "Should we fight against the causes and not against the consequences?" The result of the proposals will help manufacturers to pump Algerian, one with the best hydraulic performance for the chosen material. Certainly, there have been abrasion tests on samples, but determining the duration of wear and the wear rate of the types of materials is always a line of news. Increasing the life of the pump while remaining within the proper range of operation.
Keywords
Optimization, Energy, Wheels, Abrasion, Performances
To cite this article
CHEBIHI Lakhdar, KHODJET KESBA Omar, Adaptation of the Submerged Pumps Intended for the Irrigation in the Arid Regions, Journal of Water Resources and Ocean Science. Vol. 3, No. 2, 2014, pp. 17-21. doi: 10.11648/j.wros.20140302.11
References
[1]
WHITE, K.B; TAYLOR, S.E; "Pumping low yielding wells with conventional submersible pumps", Ground water monitoring and remediation (USA), (1995).
[2]
GENETIER B; "La pratique des pompages d'essai en hydrogéologie", Manuels et méthodes du B.R.G.M, N° 9, France, (1984).
[3]
CEMAGREF; "Les stations de pompage individuelles pour l’irrigation", (1996).
[4]
MABILLOT, A ; "Le forage d’eau", Guide pra-tique, (1988).
[5]
JEANMARIE GEORGE ; "Frottement, usure et lubrification", Eyrolles, (2000).
[6]
GODET, M ; "Les fondements mécaniques de la tribologie", Mécanique Matériaux Électricité, (1972).
[7]
DERRIEN, JACQUES ; "Surface des solides, propriétés électroniques", Paris, Techniques de l'Ingénieur, (1990).
[8]
JEAN DHERS; "Usure, avaries et corrosion", Facteur de destruction des matériels industriels, (1978).
[9]
J. AYEL ; "Les lubrifiants, moteur et pertes par frottement et usure", Institut Français du Pétrole, (1979).
[10]
JEAN BLOUET; "Usure et frottement", T. ing. A 3139.
[11]
R. BUTIN, M. PINOT; "Fabrications mécaniques", Technologie, tome 1, (1981).
[12]
UNESCO; "Etude des Ressources en Eau du Sahara Septentrional", Rapport sur les résultats du Projet REG-100, UNESCO, Paris, (1972).
[13]
OSS ; "Système Aquifère du Sahara Septentrional", Rapport interne. Annexes. Tunis, Tunisie, 229p, (2003a et b).
[14]
BRL ingénierie ; "Etude du Plan Directeur Général de Développement des Régions Sahariennes", Lot I. France, 94p, (1999).
[15]
Projet DELTA ; "Développement Des Systèmes Culturels Territoriaux, Plan d'action, cas de Ghardaïa", (2003).
[16]
http://www.google.com/earth/
[17]
http://en.wikipedia.org
[18]
http://www.hardide.com/applications/coatings-for-pumps/
[19]
http://www.poval.com.dz/.
ADDRESS
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
U.S.A.
Tel: (001)347-983-5186