Journal of Energy and Natural Resources
Volume 6, Issue 2, April 2017, Pages: 24-30
Received: May 10, 2017;
Published: May 10, 2017
Views 2551 Downloads 125
Hao Ma, Key Lab of Pulp and Paper Science & Technology, Ministry of Education, Qilu University of Technology, Ji’nan, China
Xingxiang Ji, Key Lab of Pulp and Paper Science & Technology, Ministry of Education, Qilu University of Technology, Ji’nan, China; Institute of Chemical Industry of Forestry Products, Nanjing, China
Zhongjian Tian, Key Lab of Pulp and Paper Science & Technology, Ministry of Education, Qilu University of Technology, Ji’nan, China
Guigan Fang, Institute of Chemical Industry of Forestry Products, Nanjing, China
Guihua Yang, Key Lab of Pulp and Paper Science & Technology, Ministry of Education, Qilu University of Technology, Ji’nan, China
The effects of modification on the surface properties and inhibiting compounds (formic acid, acetic acid, 5-hydroxymethylfurfural and furfural) removal performance of activate carbon (AC) were investigated. The raw and modified ACs were characterized, the result showed that the surface chemistries of the modified ACs were significant changed, but only the porous structure of modified by HNO3 were slightly damaged, and the others no obvious change. The formic acid and acetic acid removal performance of modified AC had a certain amount of improvement compared to the raw AC, but it is still relatively low (15% and 14%), so AC adsorption is not suitable for removal formic acid and acetic acid. And the 5-hydroxymethylfurfural (5-HMF) and furfural removal performance of modified AC by ZNCl2 is good (89% and 81%). the process of adsorption of 5-HMF and furfural by activated carbon belongs to the process of exothermic physical adsorption and is the entropy reduction process. The adsorption is best carried out at low temperature.
Adsorption Removal of Inhibiting Compounds by Modified Activated Carbon, Journal of Energy and Natural Resources.
Vol. 6, No. 2,
2017, pp. 24-30.
Fengel D, Wegener G, Fengel D, et al. Wood-chemistry, ultrastructure, reactions [J]. Holz als Roh- und Werkstoff, 1984, 42(8): 314-314.
Pauly M, Keegstra K. Cell-wall carbohydrates and their modification as a resource for biofuels [J]. Plant Journal for Cell & Molecular Biology, 2008, 54(4): 559-68.
Binod P, Sindhu R, Singhania R R, et al. Bioethanol production from rice straw: An overview [J]. Bioresource Technology, 2010, 101(13): 4767-4774.
Chandel A K, Antunes F a F, Arruda P V D, et al. Dilute Acid Hydrolysis of Agro-Residues for the Depolymerization of Hemicellulose: State-of-the-Art [M]. Springer Berlin Heidelberg, 2012: 39-61.
Mussatto S. I, Roberto I. C. Alternatives for detoxification of diluted-acid lignocellulosic hydrolyzates for use in fermentative processes: a review [J]. Bioresource Technology, 2004, 93(1): 1-10.
Arslan Y, Eken-Saraçoğlu N. Effects of pretreatment methods for hazelnut shell hydrolysate fermentation with Pichia Stipitis to ethanol[J]. Bioresource Technology, 2010, 101(22): 8664–8670.
Chandel A. K, Kapoor R. K, Singh A, et al. Detoxification of sugarcane bagasse hydrolysate improves ethanol production by Candida shehatae NCIM 3501 [J]. Bioresource Technology, 2007, 98(10): 1947-1950.
Liu H, Hu H, Jahan M. S, et al. Purification of Hemicelluloses in Pre-Hydrolysis Liquor of Kraft-Based Dissolving Pulp Production Process Using Activated Carbon and Ion-Exchange Resin Adsorption Followed by Nanofiltration [J]. Journal of Biobased Materials & Bioenergy, 2014, 8(3): 325-330(6).
Mahaninia M. H, Rahimian P, Kaghazchi T. Modified activated carbons with amino groups and their copper adsorption properties in aqueous solution [J]. Chinese Journal of Chemical Engineering, 2015, 23(1): 50-56.
Yao S, Zhang J, Shen D, et al. Removal of Pb(II) from water by the activated carbon modified by nitric acid under microwave heating [J]. J Colloid Interface Sci, 2016, 463: 118-27.
Shen J, Kaur I, Baktash M. M, et al. A. combined process of activated carbon adsorption, ion exchange resin treatment and membrane concentration for recovery of dissolved organics in pre-hydrolysis liquor of the kraft-based dissolving pulp production process [J]. Bioresource Technology, 2013, 127(1): 59-65.
Wang Z, Zhuang J, Wang X, et al. Limited adsorption selectivity of active carbon toward non-saccharide compounds in lignocellulose hydrolysate [J]. Bioresour Technol, 2016, 208: 195-9.
Montané D, Nabarlatz D, Martorell A, et al. Removal of Lignin and Associated Impurities from Xylo-oligosaccharides by Activated Carbon Adsorption [J]. Industrial & Engineering Chemistry Research, 2006, 45(45): págs. 2294-2302.
Liu H, Gao Q, Dai P, et al. Preparation and characterization of activated carbon from lotus stalk with guanidine phosphate activation: Sorption of Cd(II) [J]. Journal of Analytical & Applied Pyrolysis, 2013, 102(102): 7-15.
Kyzas G. Z, Lazaridis N. K, Kostoglou M. Adsorption/desorption of a dye by a chitosan derivative: Experiments and phenomenological modeling [J]. Chemical Engineering Journal, 2014, 248(248): 327-336.
Hokkanen S, Repo E, Westholm L. J, et al. Adsorption of Ni 2+, Cd 2+, PO 4 3− and NO 3 − from aqueous solutions by nanostructured microfibrillated cellulose modified with carbonated hydroxyapatite [J]. Chemical Engineering Journal, 2014, 252(5): 64-74.