Optimization of Multiple Effect Evaporators Designed for Fruit Juice Concentrate
American Journal of Energy Engineering
Volume 3, Issue 2-1, March 2015, Pages: 6-11
Received: Feb. 1, 2015; Accepted: Feb. 1, 2015; Published: Feb. 14, 2015
Views 3804      Downloads 1113
Author
Manal A. Sorour, Food Eng. and Packaging Dept., Food Tech. Res. Institute, Agric. Res. Center, Giza, Egypt
Article Tools
Follow on us
Abstract
The most important running cost item in evaporation is energy. However, energy consumption per unit production can be reduced considerably through the use of multi effect evaporation. A multiple effect evaporation scheme was studied and economically analyzed. Different economic items, including cost of steam and cost of evaporator in addition to annual total cost for single, double, three, four, five and six effects of evaporators were estimated and analyzed. The results indicated that minimum annual total cost is obtained by using a double effect evaporator.
Keywords
Multiple Effect Evaporators, Optimum Number of Effects, Annual Cost, Evaporator Cost, Steam Cost
To cite this article
Manal A. Sorour, Optimization of Multiple Effect Evaporators Designed for Fruit Juice Concentrate, American Journal of Energy Engineering. Special Issue: Energy Conservation in Food Industry. Vol. 3, No. 2-1, 2015, pp. 6-11. doi: 10.11648/j.ajee.s.2015030201.12
References
[1]
P. D. Smith, C.L. E. Swartz and S. T. L. Harrison, Control and Optimization of a Multiple effect evaporator, Proc. S. Afr. Sug. Technol. Ass., 2000, 74, pp. 274-279
[2]
H. Nuñez1, R. Simpson, S. Almonacid, and A. Abakarov, A study of different multi effect evaporators designed for Thermal processing of tomato paste: optimization and quality Evaluation", International Conference in Food Innovation, 2010.
[3]
D. Kern, Procesos de Transferencia de Calor. Editorial Continental, S.A. México, 1999
[4]
J. S. Dhara, G. Bhagchandanc, Design, Modelling and Simulation of Multiple Effect Evaporators. International Journal of Scientific Engineering and Technology, 2012, 1, pp.01-05.
[5]
V. Jaishree, Optimization of a multiple Effect Evaporator System, A Thesis submitted to the National Institute of Technology, Rourkela In partial fulfillment of the requirements of Bachelor of Technology (Chemical Engineering) Department of Chemical Engineering National institute of technology, Rourkela, Orissa, 2010, pp. 769, India.
[6]
S. Gunajit, D. B. Surajit, Energy Management in Multiple-Effect Evaporator System: A Heat Balance AnalysisApproach, Gen. Math. Notes, 2010, 1, pp. 84-88
[7]
G.V. Barbosa-Cánovas, P. Juliano and M. Peleg. Engineering properties of foods, In: Food engineering. Encyclopedia of life support sciences, Barbosa-Cánovas G.V. (Ed.). EOLSS Publishers/UNESCO, Paris, France, 2005.
[8]
M. A. Sorour, A comparative study of energy conservation methods in juice concentration by evaporation, Faculty of Eng., Cairo University, 2001, pp. 57–66.
[9]
M. S. Peter, K. D. Timmerhaus, Plant Design and Economics for Chemical Engineers, 4th Ed., McGraw Hill, New York, 1991.
[10]
B. G. Liptak, Process Control Trends, Control, March, May, and July, 2004.
ADDRESS
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
U.S.A.
Tel: (001)347-983-5186