| Peer-Reviewed

Simple Sensorless Maximum Power Extraction Control for a Variable Speed Wind Energy Conversion System

Received: 30 December 2012    Accepted:     Published: 30 December 2012
Views:       Downloads:
Abstract

This paper proposes a simple sensorless maximum power extraction control strategy for a variable speed wind energy conversion system (VSWECS) based on permanent magnet synchronous generator (PMSG). The PMSG is connected to the grid through a switch mode rectifier and a three phase voltage source inverter (VSI). Control of the generator side converter is used to achieve maximum power from the available wind power. This by Simple estimating of PMSG generator speed and using the estimated generator speed to calculate mechanical power generated from wind power. So, the optimum power coefficient of the wind turbine can be achieved from the governed relation between the generator speed and mechanical power. The grid side voltage source inverter uses a hysteresis current controller to supply power at unity power factor into the grid. Extensive simulations have been performed using MATALB/SIMULINK. Simulation results demonstrate that the controller can extract maximum power from available wind power and achieve unity power factor at the grid with different wind speeds.

Published in International Journal of Renewable and Sustainable Energy (Volume 1, Issue 1)
DOI 10.11648/j.ijrse.20120101.11
Page(s) 1-10
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Previous article
Keywords

Permanent Magnet Synchronous Generator; Maximum Power Extraction; Variable Speed Wind Energy System; Switch Mode Rectifier; Hysteresis Current Controller

References
[1] S. Muller, M. Deicke and R. W. De Doncker, "Doubly fed induction generator systemfor wind turbines," IEEE Ind. Appl. Magn, vol. 8, no. 3, pp. 26-33, May 2002.
[2] T. Ackerman and L. Soder, "An overview of wind energy status 2002," Renew. & Sus. Energy Reviews, pp. 67-128, June 2002.
[3] J. A. M. Bleij, A. W. K. Chung and J. A. Rudell, "Power Smoothing and Performance Improvement of Wind Turbines with Variable Speed," Proc. of 17th British Wind Energy Assoc. Conf., Warwick, pp. 353-358, July 1995.
[4] A. J. G. Westlake, J. R. Bumby and E. Spooner, "Damping the power-angle oscillations of a permanent magnet synchronous generator with particular reference to wind turbine applications," IEE Proceedings, Elec. Power Appl., Vol 143, No 3, pp. 269 – 280, May 1996.
[5] A. J. G. Westlake, J. R. Bumby and E. Spooner, "Damping the power-angle oscillations of a permanent magnet synchronous generator with particular reference to wind turbine applications," IEE Proceedings, Elec. Power Appl., Vol 143, No 3, pp. 269 – 280, May 1996.
[6] T. Senjyu, S. Tamaki, E. Muhando, N. Urasaki, H. Kinjo, T. Funabashi, H. Fujita and H. Sekine, "Wind velocity and rotor position sensorless maximum power point tracking control for wind generation system," Renew. Energy, Vol. 31, pp. 1764-1775, Sep. 2006.
[7] T. Pan, Zh. Ji and Zh. Jiang, "Maximum Power Point Tracking of Wind Energy Conversion Systems Based on Sliding Mode Extremum Seeking Control," Energy 2030, IEEE Conf., pp. 1 – 5, Nov. 2008.
[8] J. Hui and A. Bakhshai, "A new adaptive control algorithm for maximum power point tracking for wind energy conversion systems," Power Electronics Specialists, PESC, IEEE Conf., pp. 4003 – 4007, June 2008.
[9] L. Fan, Zh. Miao and X. Wang, "Sensorless Maximum Power Point Tracking in multi-type wind energy conversion systems," Decision and Control, 28th Chinese Control, 48th IEEE Conf., pp. 6823 – 6828, Dec. 2009.
[10] M. E. Haque, M. Negnevitsky and K. M. Muttaqui, "A Novel Control Strategy for a Variable-Speed Wind Turbine with a Permanent –Magnet Synchronous Generator," IEEE Trans. on Ind. Appl., vol.46, no. 1, pp. 331-339, Jan./Feb. 2010.
[11] M. Chinchilla, S. Arnaltes and J. C. Burgos, "Control of Permanent-Magnet Generators Applied to Variable-Speed Wind-Energy Systems Connected to the Grid," IEEE Trans. Energy Conversion, vol. 21, pp.130-135, Mar.2006.
[12] D. Luo, Y. Sun, Sh. Huang and K. Huang, "Control of Direct-Drive Permanent-Magnet Wind Power System Connected to Grid," Electrical Machines and Systems, ICEMS, IEEE International Conf., pp. 2459 – 2463, Oct. 2008.
[13] J. S. Thongam, H. Ezzaidi and M. Ouhrouche, "Wind Speed Sensorless Maximum Power Point Tracking Control of Variable Speed Wind Energy Conversion Systems," Electrical Machines and Drives, IEMDC, IEEE International Conf., pp. 1832-1837, May 2009.
[14] K. Tan and S. Islam, "Optimum control strategies in energy conversion of PMSG wind turbine system without mechanical Sensors," IEEE Trans. Energy Conversion, vol.19, pp.392-399, June 2004.
[15] M. Malinowski, W. Kolomyjski, M. P. Kazmierkowski and S. Stynski, "Control of variable-speed type wind turbines using direct power control space vector modulated 3-level PWM converter," Industrial Technology, IEEE International Conf., pp. 1516-1521, Dec.2006.
[16] A. Rolan, A. Luna, G. Vazquez, D. Aguilar and G. Azevedo, "Modeling of a variable speed wind turbine with permanent magnet synchronous generator," Ind. Electronics, ISIE, IEEE International Symposium , pp. 734-739, July 2009.
[17] R.Esmaili, and L.Xu, "Sensorless control of permanent pagnet generator in wind turbine application," IEEE Industry Applications Conf. Annual Meeting, pp. 2070 – 2075.vol.4, Oct. 2006.
Cite This Article
  • APA Style

    Mahmoud M. Hussein, Tomonobu Senjyu, Mohamed Orabi, Mohamed A. A. Wahab, Mohamed M. Hamada. (2012). Simple Sensorless Maximum Power Extraction Control for a Variable Speed Wind Energy Conversion System. International Journal of Sustainable and Green Energy, 1(1), 1-10. https://doi.org/10.11648/j.ijrse.20120101.11

    Copy | Download

    ACS Style

    Mahmoud M. Hussein; Tomonobu Senjyu; Mohamed Orabi; Mohamed A. A. Wahab; Mohamed M. Hamada. Simple Sensorless Maximum Power Extraction Control for a Variable Speed Wind Energy Conversion System. Int. J. Sustain. Green Energy 2012, 1(1), 1-10. doi: 10.11648/j.ijrse.20120101.11

    Copy | Download

    AMA Style

    Mahmoud M. Hussein, Tomonobu Senjyu, Mohamed Orabi, Mohamed A. A. Wahab, Mohamed M. Hamada. Simple Sensorless Maximum Power Extraction Control for a Variable Speed Wind Energy Conversion System. Int J Sustain Green Energy. 2012;1(1):1-10. doi: 10.11648/j.ijrse.20120101.11

    Copy | Download

  • @article{10.11648/j.ijrse.20120101.11,
      author = {Mahmoud M. Hussein and Tomonobu Senjyu and Mohamed Orabi and Mohamed A. A. Wahab and Mohamed M. Hamada},
      title = {Simple Sensorless Maximum Power Extraction Control for a Variable Speed Wind Energy Conversion System},
      journal = {International Journal of Sustainable and Green Energy},
      volume = {1},
      number = {1},
      pages = {1-10},
      doi = {10.11648/j.ijrse.20120101.11},
      url = {https://doi.org/10.11648/j.ijrse.20120101.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijrse.20120101.11},
      abstract = {This paper proposes a simple sensorless maximum power extraction control strategy for a variable speed wind energy conversion system (VSWECS) based on permanent magnet synchronous generator (PMSG). The PMSG is connected to the grid through a switch mode rectifier and a three phase voltage source inverter (VSI). Control of the generator side converter is used to achieve maximum power from the available wind power. This by Simple estimating of PMSG generator speed and using the estimated generator speed to calculate mechanical power generated from wind power. So, the optimum power coefficient of the wind turbine can be achieved from the governed relation between the generator speed and mechanical power. The grid side voltage source inverter uses a hysteresis current controller to supply power at unity power factor into the grid. Extensive simulations have been performed using MATALB/SIMULINK. Simulation results demonstrate that the controller can extract maximum power from available wind power and achieve unity power factor at the grid with different wind speeds.},
     year = {2012}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Simple Sensorless Maximum Power Extraction Control for a Variable Speed Wind Energy Conversion System
    AU  - Mahmoud M. Hussein
    AU  - Tomonobu Senjyu
    AU  - Mohamed Orabi
    AU  - Mohamed A. A. Wahab
    AU  - Mohamed M. Hamada
    Y1  - 2012/12/30
    PY  - 2012
    N1  - https://doi.org/10.11648/j.ijrse.20120101.11
    DO  - 10.11648/j.ijrse.20120101.11
    T2  - International Journal of Sustainable and Green Energy
    JF  - International Journal of Sustainable and Green Energy
    JO  - International Journal of Sustainable and Green Energy
    SP  - 1
    EP  - 10
    PB  - Science Publishing Group
    SN  - 2575-1549
    UR  - https://doi.org/10.11648/j.ijrse.20120101.11
    AB  - This paper proposes a simple sensorless maximum power extraction control strategy for a variable speed wind energy conversion system (VSWECS) based on permanent magnet synchronous generator (PMSG). The PMSG is connected to the grid through a switch mode rectifier and a three phase voltage source inverter (VSI). Control of the generator side converter is used to achieve maximum power from the available wind power. This by Simple estimating of PMSG generator speed and using the estimated generator speed to calculate mechanical power generated from wind power. So, the optimum power coefficient of the wind turbine can be achieved from the governed relation between the generator speed and mechanical power. The grid side voltage source inverter uses a hysteresis current controller to supply power at unity power factor into the grid. Extensive simulations have been performed using MATALB/SIMULINK. Simulation results demonstrate that the controller can extract maximum power from available wind power and achieve unity power factor at the grid with different wind speeds.
    VL  - 1
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Dept. of Electrical Engineering, Faculty of Energy Engineering, Aswan University, Aswan, Egypt

  • Dept. of Electrical Engineering, Faculty of Engineering, Ryukyus University, Okinawa, Japan

  • Dept. of Electrical Engineering, Faculty of Engineering, Aswan University, Aswan, Egypt

  • Dept. of Electrical Engineering, Faculty of Engineering, Minia University, Minia, Egypt

  • Dept. of Electrical Engineering, Faculty of Engineering, Minia University, Minia, Egypt

  • Sections