Design and Analysis of an External-Rotor Internal-Stator Doubly Fed Induction Generator for Small Wind Turbine Application by Fem

Hacene Mellah; Kamel Eddine Hemsas

doi:doi:10.11648/j.ijrse.20130201.11

| Peer-Reviewed

Design and Analysis of an External-Rotor Internal-Stator Doubly Fed Induction Generator for Small Wind Turbine Application by Fem

Hacene Mellah, Kamel Eddine Hemsas

Published in International Journal of Renewable and Sustainable Energy (Volume 2, Issue 1)

Received: 31 December 2012 Accepted: Published: 10 January 2013

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In this paper, a time stepping 2D and 3D FEM is performed for modeling and analysis external rotor DFIG .The finite element method currently represents the state-of-the-art in the numerical magnetic field computation relating to electrical machines. FEM is a numerical method to solve the partial differential equations (PDE) that expresses the physical quantities of interest, in this case Maxwell’s equations. This will result in a more accurate result compared to analytical modeling, which can be regarded as a simplification of the PDE. FEM analysis is used for transient mode, magnetic field calculation, the magnetic flux density and vector potential of machine is obtained. In this model we including, non linear material characteristics, eddy current effect, torque-speed characteristics, ambient temperature effect and magnetic analysis are investigated using MAXWELL program. With this program, the components of the DFIG can be calculated with high accuracy.

Published in	International Journal of Renewable and Sustainable Energy (Volume 2, Issue 1)
DOI	10.11648/j.ijrse.20130201.11
Page(s)	1-11
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

DFIG, Outer Rotor, FEM, Wind Turbines, Renewable Energy

References

[1]	AL. Olimpo, J. Nick, E. Janaka, C. Phill and H Mike, "Wind Energy Generation Modelling and Control", John Wiley & Sons, Ltd 2009.
[2]	I. woofenden, "wind power for dummies", Wiley Publishing, 2009.
[3]	A. Petersson, Analysis, "Modeling and Control of Doubly-Fed Induction Generators for Wind Turbines", PhD thesis, Chalmers university of technology, GÖteborg, Sweden 2005.
[4]	Martin O. L. Hansen, "Aerodynamics of Wind Turbines", Earth scan in the UK and USA in 2008.
[5]	Z. Fang, "Permanent magnet machine topologies for wind power generation", university of Sheffield 2010.
[6]	B.C. Pal F. Mei, "Modelling adequacy of the doubly fed induction generator for small-signal stability studies in power systems", IET Renewable Power Generation, vol. 2, Issue: 3, pp. 181–190, 2008.
[7]	H. Li, Z. Chen, "Overview of different wind generator systems and their comparisons", IET, Renewable Power Generation, vol. 2, pp. 123–138, 2008.
[8]	J. Krotsch, B. Piepenbreier, "Radial Forces in External Rotor Permanent Magnet Synchronous Motors With Non-Overlapping Windings", IEEE Transactions on Industrial Electronics, vol. 59, pp. 2267-2276, May 2012.
[9]	P. sergeant, F. de belie, J. melkebeek, "Rotor geometry design of an interior permanent-magnet synchronous machine for more accurate sensorless control", electrical machines (ICEM), xix international conference on, pp.1–6, 6-8 Sept. 2010.
[10]	İ. Tarımer, C. Ocak, "Performance Comparison of Internal and External Rotor Structured Wind Generators Mounted from Same Permanent Magnets on Same Geometry", Electronics and Electrical Engineering, vol.8, Issue. 90, pp. 67–72, 2009.
[11]	S. Seman, "Transient Performance Analysis of Wind-Power Induction Generators", Doctoral theses, Helsinki University of Technology, 2006.
[12]	Z. Huiqing, C. Shiyuan, "Finite Element Analysis on Small External Rotor Brushless DC Motor", China National Knowledge, Micromotors, 2012.
[13]	H. Torkaman, E. Afjei, A. Gorgani, N. Faraji, H. Karim, N. Arbab, "External rotor SRM with high torque per volume: design, analysis, and experiments", Springer-Verlag , Electrical Engineering, November 2012.
[14]	D. Xiaotian, Z. Xinyan1, Z. Jun, W. Houjun, HE. Shan, "Finite Element Based Electromagnetic Field Simulation and Analysis of Doubly Fed Induction Generator", China National Knowledge, Power System Technology, 2012.
[15]	H. Mellah, K.E. Hemsas, "Design and simulation analysis of outer stator inner rotor DFIG by 2d and 3d finite element methods", International Journal of Electrical Engineering and Technology, vol. 3, Issue. 2, pp. 457–470, July-Sept 2012.
[16]	K.T.Chau, Y.B. Li, J.Z.Jiang, C. Liu, "Design and Analysis of a Stator-Doubly-Fed Doubly-Salient Permanent-Magnet Machine for Automotive Engines", IEEE Transactions on Magnetics, vol. 42, Issue. 10, pp 3470 – 3472, 2006.
[17]	E. Moe, Vested interests, "Energy Efficiency and Renewables In Japan", Elsevier ,Energy Policy, vol. 40, pp 260–273, January 2012.
[18]	H. Li1, Z. Chen, H. Polinder, "research report on models for numerical evaluation of variable speed different wind generator systems", Integrating and strengthening the European Research Area, 2002-2006.
[19]	H. Mellah, K.E Hemsas, "Dynamic design and simulation analysis of permanent magnet motor in different scenario of fed alimentation", conference international on automatique and mécatronique, USTO, Oran, November 22-23, Algeria 2011.

Cite This Article

Plain Text BibTeX RIS

APA Style

Hacene Mellah, Kamel Eddine Hemsas. (2013). Design and Analysis of an External-Rotor Internal-Stator Doubly Fed Induction Generator for Small Wind Turbine Application by Fem. International Journal of Sustainable and Green Energy, 2(1), 1-11. https://doi.org/10.11648/j.ijrse.20130201.11

Copy | Download

ACS Style

Hacene Mellah; Kamel Eddine Hemsas. Design and Analysis of an External-Rotor Internal-Stator Doubly Fed Induction Generator for Small Wind Turbine Application by Fem. Int. J. Sustain. Green Energy 2013, 2(1), 1-11. doi: 10.11648/j.ijrse.20130201.11

Copy | Download

AMA Style

Hacene Mellah, Kamel Eddine Hemsas. Design and Analysis of an External-Rotor Internal-Stator Doubly Fed Induction Generator for Small Wind Turbine Application by Fem. Int J Sustain Green Energy. 2013;2(1):1-11. doi: 10.11648/j.ijrse.20130201.11

Copy | Download

@article{10.11648/j.ijrse.20130201.11,
  author = {Hacene Mellah and Kamel Eddine Hemsas},
  title = {Design and Analysis of an External-Rotor Internal-Stator Doubly Fed Induction Generator for Small Wind Turbine Application by Fem},
  journal = {International Journal of Sustainable and Green Energy},
  volume = {2},
  number = {1},
  pages = {1-11},
  doi = {10.11648/j.ijrse.20130201.11},
  url = {https://doi.org/10.11648/j.ijrse.20130201.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijrse.20130201.11},
  abstract = {In this paper, a time stepping 2D and 3D FEM is performed for modeling and analysis external rotor DFIG .The finite element method currently represents the state-of-the-art in the numerical magnetic field computation relating to electrical machines. FEM is a numerical method to solve the partial differential equations (PDE) that expresses the physical quantities of interest, in this case Maxwell’s equations. This will result in a more accurate result compared to analytical modeling, which can be regarded as a simplification of the PDE. FEM analysis is used for transient mode, magnetic field calculation, the magnetic flux density and vector potential of machine is obtained. In this model we including, non linear material characteristics, eddy current effect, torque-speed characteristics, ambient temperature effect and magnetic analysis are investigated using MAXWELL program. With this program, the components of the DFIG can be calculated with high accuracy.},
 year = {2013}
}

Copy | Download

TY  - JOUR
T1  - Design and Analysis of an External-Rotor Internal-Stator Doubly Fed Induction Generator for Small Wind Turbine Application by Fem
AU  - Hacene Mellah
AU  - Kamel Eddine Hemsas
Y1  - 2013/01/10
PY  - 2013
N1  - https://doi.org/10.11648/j.ijrse.20130201.11
DO  - 10.11648/j.ijrse.20130201.11
T2  - International Journal of Sustainable and Green Energy
JF  - International Journal of Sustainable and Green Energy
JO  - International Journal of Sustainable and Green Energy
SP  - 1
EP  - 11
PB  - Science Publishing Group
SN  - 2575-1549
UR  - https://doi.org/10.11648/j.ijrse.20130201.11
AB  - In this paper, a time stepping 2D and 3D FEM is performed for modeling and analysis external rotor DFIG .The finite element method currently represents the state-of-the-art in the numerical magnetic field computation relating to electrical machines. FEM is a numerical method to solve the partial differential equations (PDE) that expresses the physical quantities of interest, in this case Maxwell’s equations. This will result in a more accurate result compared to analytical modeling, which can be regarded as a simplification of the PDE. FEM analysis is used for transient mode, magnetic field calculation, the magnetic flux density and vector potential of machine is obtained. In this model we including, non linear material characteristics, eddy current effect, torque-speed characteristics, ambient temperature effect and magnetic analysis are investigated using MAXWELL program. With this program, the components of the DFIG can be calculated with high accuracy.
VL  - 2
IS  - 1
ER  -

Copy | Download

Author Information

Hacene Mellah

Dept. Electrical engineering, Setif, Algeria
Kamel Eddine Hemsas

Dept. Electrical engineering, Setif, Algeria

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Hacene Mellah, Kamel Eddine Hemsas. (2013). Design and Analysis of an External-Rotor Internal-Stator Doubly Fed Induction Generator for Small Wind Turbine Application by Fem. International Journal of Sustainable and Green Energy, 2(1), 1-11. https://doi.org/10.11648/j.ijrse.20130201.11

Copy | Download

ACS Style

Hacene Mellah; Kamel Eddine Hemsas. Design and Analysis of an External-Rotor Internal-Stator Doubly Fed Induction Generator for Small Wind Turbine Application by Fem. Int. J. Sustain. Green Energy 2013, 2(1), 1-11. doi: 10.11648/j.ijrse.20130201.11

Copy | Download

AMA Style

Hacene Mellah, Kamel Eddine Hemsas. Design and Analysis of an External-Rotor Internal-Stator Doubly Fed Induction Generator for Small Wind Turbine Application by Fem. Int J Sustain Green Energy. 2013;2(1):1-11. doi: 10.11648/j.ijrse.20130201.11

Copy | Download

@article{10.11648/j.ijrse.20130201.11,
  author = {Hacene Mellah and Kamel Eddine Hemsas},
  title = {Design and Analysis of an External-Rotor Internal-Stator Doubly Fed Induction Generator for Small Wind Turbine Application by Fem},
  journal = {International Journal of Sustainable and Green Energy},
  volume = {2},
  number = {1},
  pages = {1-11},
  doi = {10.11648/j.ijrse.20130201.11},
  url = {https://doi.org/10.11648/j.ijrse.20130201.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijrse.20130201.11},
  abstract = {In this paper, a time stepping 2D and 3D FEM is performed for modeling and analysis external rotor DFIG .The finite element method currently represents the state-of-the-art in the numerical magnetic field computation relating to electrical machines. FEM is a numerical method to solve the partial differential equations (PDE) that expresses the physical quantities of interest, in this case Maxwell’s equations. This will result in a more accurate result compared to analytical modeling, which can be regarded as a simplification of the PDE. FEM analysis is used for transient mode, magnetic field calculation, the magnetic flux density and vector potential of machine is obtained. In this model we including, non linear material characteristics, eddy current effect, torque-speed characteristics, ambient temperature effect and magnetic analysis are investigated using MAXWELL program. With this program, the components of the DFIG can be calculated with high accuracy.},
 year = {2013}
}

Copy | Download

TY  - JOUR
T1  - Design and Analysis of an External-Rotor Internal-Stator Doubly Fed Induction Generator for Small Wind Turbine Application by Fem
AU  - Hacene Mellah
AU  - Kamel Eddine Hemsas
Y1  - 2013/01/10
PY  - 2013
N1  - https://doi.org/10.11648/j.ijrse.20130201.11
DO  - 10.11648/j.ijrse.20130201.11
T2  - International Journal of Sustainable and Green Energy
JF  - International Journal of Sustainable and Green Energy
JO  - International Journal of Sustainable and Green Energy
SP  - 1
EP  - 11
PB  - Science Publishing Group
SN  - 2575-1549
UR  - https://doi.org/10.11648/j.ijrse.20130201.11
AB  - In this paper, a time stepping 2D and 3D FEM is performed for modeling and analysis external rotor DFIG .The finite element method currently represents the state-of-the-art in the numerical magnetic field computation relating to electrical machines. FEM is a numerical method to solve the partial differential equations (PDE) that expresses the physical quantities of interest, in this case Maxwell’s equations. This will result in a more accurate result compared to analytical modeling, which can be regarded as a simplification of the PDE. FEM analysis is used for transient mode, magnetic field calculation, the magnetic flux density and vector potential of machine is obtained. In this model we including, non linear material characteristics, eddy current effect, torque-speed characteristics, ambient temperature effect and magnetic analysis are investigated using MAXWELL program. With this program, the components of the DFIG can be calculated with high accuracy.
VL  - 2
IS  - 1
ER  -

Copy | Download