Modeling of Hydrate Deposition in Loading and Offloading Flowlines of Marine CNG Systems

Esam I. Jassim

doi:doi:10.11648/j.ijrse.s.2014030601.11

| Peer-Reviewed

Modeling of Hydrate Deposition in Loading and Offloading Flowlines of Marine CNG Systems

Esam I. Jassim

Published in International Journal of Sustainable and Green Energy (Volume 3, Issue 6-1)

Received: 29 November 2014 Accepted: 3 December 2014 Published: 13 February 2015

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The main aim of this paper is to demonstrate the prediction of the model capability of predicting the nucleation process, the growth rate, and the deposition potential of hydrate particles in gas flowlines. The primary objective of the research is to predict the risk hazards involved in the marine transportation of compressed natural gas. However the proposed model can be equally used for other applications including production and transportation of natural gas in any high pressure flowline. The proposed model employs the following three main components to approach the problem: computational fluid dynamics (CFD) technique is used to configure the flow field; the nucleation model is developed and incorporated in the simulation to predict the incipient hydrate particles size and growth rate; and the deposition of the gas/particle flow is proposed using the concept of the particle deposition velocity. These components are integrated in comprehended model to locate the hydrate deposition in natural gas flowlines. The present research is prepared to foresee the hydrate deposition location that could occur in a real application in Compressed Natural Gas loading and offloading. A pipeline with 120 m length and different sizes carried a natural gas is taken in the study. The location of hydrate deposition formed as a result of restriction is determined based on the procedure mentioned earlier and the effect of water content and downstream pressure is studied. The critical flow speed that prevents hydrate to accumulate in the certain pipe length is also addressed.

Published in	International Journal of Sustainable and Green Energy (Volume 3, Issue 6-1) This article belongs to the Special Issue Renewable Energy and Its Environmental Impaction
DOI	10.11648/j.ijrse.s.2014030601.11
Page(s)	1-6
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Hydrate deposition, Natural gas, CFD, Multiphase flow

References

[1]	Chen Q., and Ahmadi G., “Deposition of particles in a turbulent pipe flow”, Journal of Aerosol Science, 28, 789-796, 1997.
[2]	Cherukat P., McLaughlin J.B., “The Inertial Lift on a Rigid Sphere in a Linear Shear Flow Field Near a Flat Wall”, Journal of Fluid Mechanics, 263, 1–18, 1994.
[3]	Cleaver J.W., and Yates B., “A sublayer model for the deposition of particles from a turbulent flow”, Chem.Engng Sci. 30, 983-992, 1975.
[4]	Crowe C.T., “Multiphase Flow Handbook”, Taylor & Francis Group, 2006.
[5]	“Engineering Data Book/CD-ROM SET”, 12th Edition, Gas Processors Suppliers Association, Tulsa- Oklahoma, 2004.
[6]	Fan F-G., and Ahmadi G., “A sublayer model for turbulent deposition of particles in vertical ducts with smooth and rough surfaces”, Journal of Aerosol Science, 24, 45-64, 1993.
[7]	Gondret P., Lance M., Petit L., “Bouncing Motion of Spherical Particles in Fluids”, Physics of Fluids, 14(2), 643-652, 2002.
[8]	Jassim E.I., “Locating Hydrate Deposition in Multiphase Compressed Natural Gas Flow Lines Using Computational Fluid Dynamics Techniques”, PhD Thesis, Memorial University of Newfoundland, St. Johns, 2008.
[9]	Jassim E.I., Abedinzadegan Abdi M., and Muzychka Y., “A new approach to investigate hydrate deposition in gas-dominated flowlines”, Journal of Natural Gas Science and Engineering, Vol.2, Issue 4, Sept.2010, Pages 163-177.
[10]	Joseph G.G., Zenit R., Hunt M.L., Rosenwinkel A.M., “Particle-Wall Collision in a Viscous Fluid”, Journal of Fluid Mechanics, 433, 329-346, 2001.
[11]	Kvasnak W., Ahmadi G., Bayer R., Gaynes M., “Experimental Investigation of Dust Particle Deposition in a Turbulent Channel Flow”, Journal of Aerosol Science, 24 (6), 795-815, 1993.
[12]	Legendre D., Zenit R., Daniel C., Guiraud P., “A Note on the Modeling of the Bouncing of Spherical Drops or Solid Spheres on a Wall in Viscous Fluid”, Chemical Engineering Science, 61, 3543-3549, 2006.
[13]	Legendre D., Daniel C., Guiraud P., “Experimental Study of a Drop Bouncing on a Wall in a Liquid”, Physics of Fluids, 17(1), 1-13, 2005.
[14]	Li A., and Ahmadi G., “Deposition of aerosols on surfaces in a turbulent channel flow”, International Journal of Engineering Science, 31, 435 451, 1993.
[15]	Shams M., Ahmadi G., Rahimzadah,H., “A sublayer model for deposition of nano- and micro-particles in turbulent flows”, Chemical Engineering Science, 55, 6097-6107, 2000.
[16]	Sloan E.D, “Fundamental principles and applications of Natural Gas Hydrates”, Nature Publication Group, 426, 353-359, Nov. 2003.
[17]	Tian, L., and Ahmadi G., “Particle deposition in turbulent duct flow-comparisons of different model predictions”, Journal of Aerosol Science, 38, 377-397, 2007.
[18]	Wang J., and Levy E.K., “Particle Motions and Distributions in Turbulent Boundary Layer of Air-Particle Flow Past a Vertical Flat Plate”, Experimental Thermal and Fluid Science, 27, 845-853, 2003.
[19]	Wells A.C., and Chamberlain A.C., “Transport of Small Particles to Vertical Surfaces”, Brit. J. Appl. Phys., 18, 1793, 1967.

Cite This Article

Plain Text BibTeX RIS

APA Style

Esam I. Jassim. (2015). Modeling of Hydrate Deposition in Loading and Offloading Flowlines of Marine CNG Systems. International Journal of Sustainable and Green Energy, 3(6-1), 1-6. https://doi.org/10.11648/j.ijrse.s.2014030601.11

Copy | Download

ACS Style

Esam I. Jassim. Modeling of Hydrate Deposition in Loading and Offloading Flowlines of Marine CNG Systems. Int. J. Sustain. Green Energy 2015, 3(6-1), 1-6. doi: 10.11648/j.ijrse.s.2014030601.11

Copy | Download

AMA Style

Esam I. Jassim. Modeling of Hydrate Deposition in Loading and Offloading Flowlines of Marine CNG Systems. Int J Sustain Green Energy. 2015;3(6-1):1-6. doi: 10.11648/j.ijrse.s.2014030601.11

Copy | Download

@article{10.11648/j.ijrse.s.2014030601.11,
  author = {Esam I. Jassim},
  title = {Modeling of Hydrate Deposition in Loading and Offloading Flowlines of Marine CNG Systems},
  journal = {International Journal of Sustainable and Green Energy},
  volume = {3},
  number = {6-1},
  pages = {1-6},
  doi = {10.11648/j.ijrse.s.2014030601.11},
  url = {https://doi.org/10.11648/j.ijrse.s.2014030601.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijrse.s.2014030601.11},
  abstract = {The main aim of this paper is to demonstrate the prediction of the model capability of predicting the nucleation process, the growth rate, and the deposition potential of hydrate particles in gas flowlines. The primary objective of the research is to predict the risk hazards involved in the marine transportation of compressed natural gas.  However the proposed model can be equally used for other applications including production and transportation of natural gas in any high pressure flowline. The proposed model employs the following three main components to approach the problem: computational fluid dynamics (CFD) technique is used to configure the flow field; the nucleation model is developed and incorporated in the simulation to predict the incipient hydrate particles size and growth rate; and the deposition of the gas/particle flow is proposed using the concept of the particle deposition velocity. These components are integrated in comprehended model to locate the hydrate deposition in natural gas flowlines. The present research is prepared to foresee the hydrate deposition location that could occur in a real application in Compressed Natural Gas loading and offloading. A pipeline with 120 m length and different sizes carried a natural gas is taken in the study. The location of hydrate deposition formed as a result of restriction is determined based on the procedure mentioned earlier and the effect of water content and downstream pressure is studied. The critical flow speed that prevents hydrate to accumulate in the certain pipe length is also addressed.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Modeling of Hydrate Deposition in Loading and Offloading Flowlines of Marine CNG Systems
AU  - Esam I. Jassim
Y1  - 2015/02/13
PY  - 2015
N1  - https://doi.org/10.11648/j.ijrse.s.2014030601.11
DO  - 10.11648/j.ijrse.s.2014030601.11
T2  - International Journal of Sustainable and Green Energy
JF  - International Journal of Sustainable and Green Energy
JO  - International Journal of Sustainable and Green Energy
SP  - 1
EP  - 6
PB  - Science Publishing Group
SN  - 2575-1549
UR  - https://doi.org/10.11648/j.ijrse.s.2014030601.11
AB  - The main aim of this paper is to demonstrate the prediction of the model capability of predicting the nucleation process, the growth rate, and the deposition potential of hydrate particles in gas flowlines. The primary objective of the research is to predict the risk hazards involved in the marine transportation of compressed natural gas.  However the proposed model can be equally used for other applications including production and transportation of natural gas in any high pressure flowline. The proposed model employs the following three main components to approach the problem: computational fluid dynamics (CFD) technique is used to configure the flow field; the nucleation model is developed and incorporated in the simulation to predict the incipient hydrate particles size and growth rate; and the deposition of the gas/particle flow is proposed using the concept of the particle deposition velocity. These components are integrated in comprehended model to locate the hydrate deposition in natural gas flowlines. The present research is prepared to foresee the hydrate deposition location that could occur in a real application in Compressed Natural Gas loading and offloading. A pipeline with 120 m length and different sizes carried a natural gas is taken in the study. The location of hydrate deposition formed as a result of restriction is determined based on the procedure mentioned earlier and the effect of water content and downstream pressure is studied. The critical flow speed that prevents hydrate to accumulate in the certain pipe length is also addressed.
VL  - 3
IS  - 6-1
ER  -

Copy | Download

Author Information

Esam I. Jassim

Department of Mechanical Engineering, Prince Mohammad Bin Fahd University, Al-Khobar, Saudi Arabia, 31952

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Esam I. Jassim. (2015). Modeling of Hydrate Deposition in Loading and Offloading Flowlines of Marine CNG Systems. International Journal of Sustainable and Green Energy, 3(6-1), 1-6. https://doi.org/10.11648/j.ijrse.s.2014030601.11

Copy | Download

ACS Style

Esam I. Jassim. Modeling of Hydrate Deposition in Loading and Offloading Flowlines of Marine CNG Systems. Int. J. Sustain. Green Energy 2015, 3(6-1), 1-6. doi: 10.11648/j.ijrse.s.2014030601.11

Copy | Download

AMA Style

Esam I. Jassim. Modeling of Hydrate Deposition in Loading and Offloading Flowlines of Marine CNG Systems. Int J Sustain Green Energy. 2015;3(6-1):1-6. doi: 10.11648/j.ijrse.s.2014030601.11

Copy | Download

@article{10.11648/j.ijrse.s.2014030601.11,
  author = {Esam I. Jassim},
  title = {Modeling of Hydrate Deposition in Loading and Offloading Flowlines of Marine CNG Systems},
  journal = {International Journal of Sustainable and Green Energy},
  volume = {3},
  number = {6-1},
  pages = {1-6},
  doi = {10.11648/j.ijrse.s.2014030601.11},
  url = {https://doi.org/10.11648/j.ijrse.s.2014030601.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijrse.s.2014030601.11},
  abstract = {The main aim of this paper is to demonstrate the prediction of the model capability of predicting the nucleation process, the growth rate, and the deposition potential of hydrate particles in gas flowlines. The primary objective of the research is to predict the risk hazards involved in the marine transportation of compressed natural gas.  However the proposed model can be equally used for other applications including production and transportation of natural gas in any high pressure flowline. The proposed model employs the following three main components to approach the problem: computational fluid dynamics (CFD) technique is used to configure the flow field; the nucleation model is developed and incorporated in the simulation to predict the incipient hydrate particles size and growth rate; and the deposition of the gas/particle flow is proposed using the concept of the particle deposition velocity. These components are integrated in comprehended model to locate the hydrate deposition in natural gas flowlines. The present research is prepared to foresee the hydrate deposition location that could occur in a real application in Compressed Natural Gas loading and offloading. A pipeline with 120 m length and different sizes carried a natural gas is taken in the study. The location of hydrate deposition formed as a result of restriction is determined based on the procedure mentioned earlier and the effect of water content and downstream pressure is studied. The critical flow speed that prevents hydrate to accumulate in the certain pipe length is also addressed.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Modeling of Hydrate Deposition in Loading and Offloading Flowlines of Marine CNG Systems
AU  - Esam I. Jassim
Y1  - 2015/02/13
PY  - 2015
N1  - https://doi.org/10.11648/j.ijrse.s.2014030601.11
DO  - 10.11648/j.ijrse.s.2014030601.11
T2  - International Journal of Sustainable and Green Energy
JF  - International Journal of Sustainable and Green Energy
JO  - International Journal of Sustainable and Green Energy
SP  - 1
EP  - 6
PB  - Science Publishing Group
SN  - 2575-1549
UR  - https://doi.org/10.11648/j.ijrse.s.2014030601.11
AB  - The main aim of this paper is to demonstrate the prediction of the model capability of predicting the nucleation process, the growth rate, and the deposition potential of hydrate particles in gas flowlines. The primary objective of the research is to predict the risk hazards involved in the marine transportation of compressed natural gas.  However the proposed model can be equally used for other applications including production and transportation of natural gas in any high pressure flowline. The proposed model employs the following three main components to approach the problem: computational fluid dynamics (CFD) technique is used to configure the flow field; the nucleation model is developed and incorporated in the simulation to predict the incipient hydrate particles size and growth rate; and the deposition of the gas/particle flow is proposed using the concept of the particle deposition velocity. These components are integrated in comprehended model to locate the hydrate deposition in natural gas flowlines. The present research is prepared to foresee the hydrate deposition location that could occur in a real application in Compressed Natural Gas loading and offloading. A pipeline with 120 m length and different sizes carried a natural gas is taken in the study. The location of hydrate deposition formed as a result of restriction is determined based on the procedure mentioned earlier and the effect of water content and downstream pressure is studied. The critical flow speed that prevents hydrate to accumulate in the certain pipe length is also addressed.
VL  - 3
IS  - 6-1
ER  -

Copy | Download