International Journal of Business and Economics Research

| Peer-Reviewed |

Scenario Analysis of Profits in Further Processing Lumber to Furniture in Ghana for Export: A Case Study of a Local Firm

Received: 15 February 2015    Accepted: 04 March 2015    Published: 24 March 2015
Views:       Downloads:

Share This Article

Abstract

Scenario analysis was used to investigate whether incurring extra costs towards adding value to lumber through further processing is an economically viable venture or not. In-factory study, observations, records review and interviews were used to collect data on costs and incomes relating to lumber and furniture production and exports. The accounting rule for decisions to sell or further process a semi-processed product at the split-off-point was used to assess the profit level under each of five scenarios developed. Results revealed that, it costs €1,336 (66.80% of FOB value/m3 of furniture) to convert kiln-dried lumber to 1m3 of garden furniture which yields income of €2,073.13/m3. Scenario analyses indicated that, 1m3 of garden furniture in general could yield additional incomes in the range of €66.077 to €334.414 representing 12.4% and 62.7% respectively over the export values of lumber used. Three species (odum, mixed redwood and teak) were profitable with mixed redwood and teak respectively obtaining the highest (from 48.14% to 123.63%) and the lowest (from 37.59% to 9.44%) additional profits in relation to the FOB value of their kiln-dried lumber. In conclusion, maintaining costs and increasing production volumes appeared to be the best scenario for higher profits in furniture production. Also, further processing lumber to garden furniture for export appear profitable and should be encouraged as an economic decision towards high revenue generation. It was recommended that the three profitable wood species should be considered for plantations by stakeholders in the afforestation and reforestation of degraded forests in Ghana to ensure their continuous availability for the furniture industry.

DOI 10.11648/j.ijber.20150402.15
Published in International Journal of Business and Economics Research (Volume 4, Issue 2, April 2015)
Page(s) 55-66
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Ghana Furniture Production, Costs and Profits, Scenario Analysis, Furniture and Lumber FOB Values, Wood Species in Ghana

References
[1] Alexander Rose Ltd. (2005). Fine Quality Traditional Garden Furniture, Alexander Rose Ltd, West Sussex. U.K. pp 1-5.
[2] Plow, and Heart Inc., (2006). Furniture Buying Guide. Retrieved, April, 2006 from www.plowhearth.com/ Outlet Store.
[3] TIDD. (2003). Exporters performance/moving species/direction of trade-Lumber (KD), flooring and furniture parts. Report on Export of Wood Products for December. (pp. 1-45). Takoradi. Ghana. Data Processing Section of TIDD.
[4] Ratnasingam, J., (1998). The South-East Asian Furniture Industry Siege, Southern African Wood and Timber Times 24 (1), South Africa. PP 68-72.
[5] Waters, M. M. (1970). Woodwork - A course for First Exanimations, R & R Clark, Ltd. London. Great Britain. pp. 67-136.
[6] Dadzie P. K., Amoah, M. & Tekpetey S. L (2014). Preliminary Assessment of Wealth Creation in Wood Products’ Business in Ghana: The Perspective of Lumber and Furniture Production and Implications for Entrepreneurship, International Journal of Business and Economic Research, 3(6): 243-249. doi: 10.11648/j.ijber.20140306.15. Retrieved, December 2014 from http://www.sciencepublishinggroup.com/j/ijber
[7] Garrison, R. H. (1991). Managerial Accounting – Concepts for planning, control and decision making, (6th ed.). Von Hoffmann Press Inc., New York. U.S.A. pp 503-770
[8] Engler, C. (1990). Managerial Accounting, (2nd ed.). R. R Donnelley & Sons Company, New York. U.S.A. pp 114-618.
[9] ROSS, A. Stephen, Westerfield, Randolph W. and Jordan, Bradford D. (2000). Fundamentals of Corporate Finance, 5th Edition, Irwin McGraw-Hill, London. U.K. pp. 317-335.
[10] Kula, E. (1994). Economics of Natural Resources, The Environment and Policies, 2nd Edition, Chapman & Hall, London. U.K. pp. 89-98.
[11] Eckles, R. W., Carmichael T. L. and Sarchet, B. R. (1981). Supervisory management. (2nd ed.). John Wiley and Sons, New York. U.S.A. pp1-50.
[12] Desch, H. E., and Dinwodie, J. M. (1996). Timber structure properties, conversion and use. 7th Edition, Macmillan Press, London. U. K. 306pp.
[13] Haygreen, J. G. and Bowyer J. L. (1996). Forest Products and Wood Science-An Introduction, (3rd ed), IOWA State University Press, Ames. U.S.A. 485pp.
[14] TIDD. (2005a). The First 30 out of 126 Exporters of all wood products, Jan-Feb 2005. Wood Products’ Export Report for February 2005, Data Processing Section of TIDD, Takoradi, Ghana. pp. 4-32.
[15] Asumadu, K. (1997). Forest Resources-Declining Nature, Competitiveness in International Trade, Policy and Institutional Changes to promote investment. In AFORNET - Policy Brief No. 8, Wood Based Industries in Sub-Saharan Africa. pp. 12-18.
[16] Forestry Department (2001) Forestry sector outlook studies: Ghana Ministry of Lands and Forestry Country Report FOSA/WP/12. Accra, Ghana.
[17] Ghana Statistical Services (2007) Economic Survey 2001-2005, Ghana Statistical Service, Accra, Ghana. 131pp.
[18] TIDD. (2005b). Exporters performance/moving species/direction of trade-Lumber (KD), flooring and furniture Parts. Report on Export of Wood Products for December 2005, Data Processing Section of TIDD, Takoradi, Ghana. pp. 3-54.
[19] TIDD. (2004). Exporters performance/moving species/direction of trade-Lumber (KD), flooring and furniture part. Report on Export of Wood Products for December 2004, Data Processing Section of TIDD, Takoradi, Ghana. pp. 2-52.
[20] Crystal, Alec K. and Lipsey, Richard G. (1997). Economics for Business and Management, Oxford University Press Inc. New York. U.S.A. pp. 117-352.
[21] Glastra (1991) in Ayivor J S, Gorden C, Adomako J K, and Ntiamoah-Baidu Y (2011) Challenges of managing forest reserves: Case study of Atewa range forest reserve, Ghana, Nature and Faune 25(2) 56- 63.
[22] Acquah ET and Whyte C (1998) The potential for Ghana’s wood/wood products in the U.S market Office of Sustainable Development, USAID Africa Bureau. pp. 8 - 133.
[23] Tillman D. A. (1985). Forest Products Advanced Technologies and Economics Analyses, Academic Press Inc., Orlando, Florida. U.S.A. 283pp.
[24] Gregory, R. G. (1987). Resource Economics for Foresters. John Wiley & Sons Inc. New Jersey. Canada. pp. 1-145.
[25] Quesada-Pineda, H. (2010). The ABCs of Cost Allocation in the wood products industry: Applications in the furniture industry, Virginia Cooperative extension publication No. 420-147. pp. 1-10. Retrieved, May, 2012, from http://pubs.ext.vt.edu/index.html.
[26] Corrado, C. J., and Jordan, B. D. (2000). Fundamentals of Investments-Valuation and Management, Irwin McGraw-Hill, Boston. U.S.A. pp. 3-31.
[27] Hilton, R. W., Maher, M. W. and Selto, F. H. (2000). Cost Management –Strategies for Business Decision, (International ed.). McGraw-Hill Companies, Inc., Boston. U.S.A. pp. 105-588.
[28] BPP Publishing Ltd. (2001). Financial Information for Management, 1st Edition, ACCA Study Text, BPP Publishing Limited, London. U.K. pp. 50-410.
[29] Agyarko T. (2001). FAO Corporate document Repository FOSA Forestry Outlook Study for Africa. Country Report – Ghana, Ministry of Lands and Forestry. 2nd draft FOSA/WP/12. 49pp.
[30] Gyimah, R. and Adu, G. A. (2009). A pilot study on sawnwood conversion efficiency in selected sawmills in Ghana. A draft report presented at a National workshop in Kumasi, March, 2009. 52pp.
[31] Owusu, F. W., Appiah, J.K., Damnyag, L., and Blay, D. (2011). Comparative anaylsis of recovery efficiencies of some milling techniques in Ghana, Ghana Journal of Forestry, Vol. 27. pp. 87-100.
[32] Amjadi, A. and Yeast, A. J. (1995). Have Transport Costs contributed to the relative decline of Sub- Saharan African Exports? Some preliminary empirical evidence. Policy Research Working Paper, 1 (WPS 1559 of 2005). Retrieved, May 2005 from www.econ.worldbank.org/external.
[33] Sools R, de-wilde R, Tellenear M (2003) Reforestation of degraded forest reserves in Ghana, Form Ghana Project Desing Document. 83pp.
Author Information
  • Interior Architecture and Furniture Production Department, Kumasi Polytechnic, Kumasi, Ghana

  • Faculty of Renewable Natural Resources, Department of Wood Science and Technology, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana

  • Faculty of Technical Education, University of Education Winneba, Kumasi Campus, Kumasi, Ghana

  • Interior Architecture and Furniture Production Department, Kumasi Polytechnic, Kumasi, Ghana

Cite This Article
  • APA Style

    Peter Kessels Dadzie, Kwasi Frimpong-Mensah, Martin Amoah, Ernest Boampong. (2015). Scenario Analysis of Profits in Further Processing Lumber to Furniture in Ghana for Export: A Case Study of a Local Firm. International Journal of Business and Economics Research, 4(2), 55-66. https://doi.org/10.11648/j.ijber.20150402.15

    Copy | Download

    ACS Style

    Peter Kessels Dadzie; Kwasi Frimpong-Mensah; Martin Amoah; Ernest Boampong. Scenario Analysis of Profits in Further Processing Lumber to Furniture in Ghana for Export: A Case Study of a Local Firm. Int. J. Bus. Econ. Res. 2015, 4(2), 55-66. doi: 10.11648/j.ijber.20150402.15

    Copy | Download

    AMA Style

    Peter Kessels Dadzie, Kwasi Frimpong-Mensah, Martin Amoah, Ernest Boampong. Scenario Analysis of Profits in Further Processing Lumber to Furniture in Ghana for Export: A Case Study of a Local Firm. Int J Bus Econ Res. 2015;4(2):55-66. doi: 10.11648/j.ijber.20150402.15

    Copy | Download

  • @article{10.11648/j.ijber.20150402.15,
      author = {Peter Kessels Dadzie and Kwasi Frimpong-Mensah and Martin Amoah and Ernest Boampong},
      title = {Scenario Analysis of Profits in Further Processing Lumber to Furniture in Ghana for Export: A Case Study of a Local Firm},
      journal = {International Journal of Business and Economics Research},
      volume = {4},
      number = {2},
      pages = {55-66},
      doi = {10.11648/j.ijber.20150402.15},
      url = {https://doi.org/10.11648/j.ijber.20150402.15},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ijber.20150402.15},
      abstract = {Scenario analysis was used to investigate whether incurring extra costs towards adding value to lumber through further processing is an economically viable venture or not. In-factory study, observations, records review and interviews were used to collect data on costs and incomes relating to lumber and furniture production and exports. The accounting rule for decisions to sell or further process a semi-processed product at the split-off-point was used to assess the profit level under each of five scenarios developed. Results revealed that, it costs €1,336 (66.80% of FOB value/m3 of furniture) to convert kiln-dried lumber to 1m3 of garden furniture which yields income of €2,073.13/m3. Scenario analyses indicated that, 1m3 of garden furniture in general could yield additional incomes in the range of €66.077 to €334.414 representing 12.4% and 62.7% respectively over the export values of lumber used. Three species (odum, mixed redwood and teak) were profitable with mixed redwood and teak respectively obtaining the highest (from 48.14% to 123.63%) and the lowest (from 37.59% to 9.44%) additional profits in relation to the FOB value of their kiln-dried lumber. In conclusion, maintaining costs and increasing production volumes appeared to be the best scenario for higher profits in furniture production. Also, further processing lumber to garden furniture for export appear profitable and should be encouraged as an economic decision towards high revenue generation. It was recommended that the three profitable wood species should be considered for plantations by stakeholders in the afforestation and reforestation of degraded forests in Ghana to ensure their continuous availability for the furniture industry.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Scenario Analysis of Profits in Further Processing Lumber to Furniture in Ghana for Export: A Case Study of a Local Firm
    AU  - Peter Kessels Dadzie
    AU  - Kwasi Frimpong-Mensah
    AU  - Martin Amoah
    AU  - Ernest Boampong
    Y1  - 2015/03/24
    PY  - 2015
    N1  - https://doi.org/10.11648/j.ijber.20150402.15
    DO  - 10.11648/j.ijber.20150402.15
    T2  - International Journal of Business and Economics Research
    JF  - International Journal of Business and Economics Research
    JO  - International Journal of Business and Economics Research
    SP  - 55
    EP  - 66
    PB  - Science Publishing Group
    SN  - 2328-756X
    UR  - https://doi.org/10.11648/j.ijber.20150402.15
    AB  - Scenario analysis was used to investigate whether incurring extra costs towards adding value to lumber through further processing is an economically viable venture or not. In-factory study, observations, records review and interviews were used to collect data on costs and incomes relating to lumber and furniture production and exports. The accounting rule for decisions to sell or further process a semi-processed product at the split-off-point was used to assess the profit level under each of five scenarios developed. Results revealed that, it costs €1,336 (66.80% of FOB value/m3 of furniture) to convert kiln-dried lumber to 1m3 of garden furniture which yields income of €2,073.13/m3. Scenario analyses indicated that, 1m3 of garden furniture in general could yield additional incomes in the range of €66.077 to €334.414 representing 12.4% and 62.7% respectively over the export values of lumber used. Three species (odum, mixed redwood and teak) were profitable with mixed redwood and teak respectively obtaining the highest (from 48.14% to 123.63%) and the lowest (from 37.59% to 9.44%) additional profits in relation to the FOB value of their kiln-dried lumber. In conclusion, maintaining costs and increasing production volumes appeared to be the best scenario for higher profits in furniture production. Also, further processing lumber to garden furniture for export appear profitable and should be encouraged as an economic decision towards high revenue generation. It was recommended that the three profitable wood species should be considered for plantations by stakeholders in the afforestation and reforestation of degraded forests in Ghana to ensure their continuous availability for the furniture industry.
    VL  - 4
    IS  - 2
    ER  - 

    Copy | Download

  • Sections