Servitization of Manufacturer and Intellectual Property Protection——Empirical Analysis Based on the OECD Countries

Zhibin Zhang

doi:doi:10.11648/j.si.20160406.16

| Peer-Reviewed |

Servitization of Manufacturer and Intellectual Property Protection——Empirical Analysis Based on the OECD Countries

Zhibin Zhang

Received: 6 December 2016 Accepted: Published: 7 December 2016

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In this paper, through using the OECD (Organization for Economic Co-operation and Development) data and comparing with Chinese data, the result shows that the overall, labor-intensive, capital-intensive and technology-intensive manufacure of China all have low servitization degree, which results the Chinese manufature stays in the low stage of the global value chain. At the same time, the empirical analysis on the level of intellectual property protection and the servitization of manufacture shows that the improvement of intellectual property protection can contribute to the integration of manufacturing and service, and this role in technology-intensive manufacturing is more obvious. This study also finds that the proportion of employment in service sector, the competitiveness of manufacture will positively promote the overall and different factors intensive manufacturing servitization degrees, while the level of innovation and economic freedom will inhibit the servitization of manufacture.

DOI	10.11648/j.si.20160406.16
Published in	Science Innovation (Volume 4, Issue 6, December 2016)
Page(s)	278-282
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Servitization, Intellectual Property Protection, Input-Output

References

[1]	黄莉芳,杨向阳.中、美现代服务业内部结构演变趋势比较——来自投入产出表的经验证据[J].世界经济研究,2015,3:99-106。
[2]	马云泽.世界产业结构软化趋势探析[J].世界经济研究,2004,6(1):15-19。
[3]	Vandermerwe. S. and J. Rada. Servitization of Business: Adding Value by Adding Services [J]. European Management Journal, 1989, 6 (4): 314-324.
[4]	Bains T. S., Lightfoot H. W. and Benedettini O. The servitization of manufacturing: areview of literature and reflection of future challenges [J]. Manufacturing Technology Management， 2009, 20 (5): 547–567.
[5]	Neely Andy. The Servitization of Manufacturing: an Anlsysis of Global Trends [J]. 14th European Operations Management Association, 2007: 1-10.
[6]	Neely Andy. Exploring the financial consequences of the servitization of manufacturing[J]. Operations Management Research, 2008, 1 (2): 103-118.
[7]	Falk M. and Peng F.. The increasing service intensity of European manufacturing[J]. The Service Industries Journal, 2013,33(15-16): 1686-1706.
[8]	Arnold J. M., Javorcik B. and Lipscomb M, et al.. Services reform and manufacturing performance: Evidence from India, The Economic Journal, 2014, 10 (02): 1-39.
[9]	刘继国,赵一婷.制造业中间投入服务化趋势分析——基于OECD中9个国家的宏观实证[J].经济与管理,2006,20(9):9-12。
[10]	刘继国,赵一婷.制造业企业产出服务化战略的影响因素及其绩效：理论框架与实证研究[J].上海管理科学,2008,(6):42-46。
[11]	周艳春.制造企业服务化战略实施及其对绩效的影响研究[D].西北大学,2010。
[12]	赵勇,齐讴歌,曹林.装备制造业服务化过程及其保障因素——基于陕鼓集团的案例研究[J].科学学与科学技术管理,2012,33(12):108-117。
[13]	黄群慧,霍景东.全球制造业服务化水平及其影响因素——基于国际投入产出数据的实证分析[J].经济管理,2014(1):1-11。
[14]	綦良群,赵少华,蔡渊渊.装备制造业服务化过程及影响因素研究——基于我国内地30个省市截面数据的实证研究[J].科技进步与对策,2014,31(14):47-53。
[15]	宁进.中国装备制造业服务化转型的路径因子及其绩效实证[J].求索,2015(5):101-105。
[16]	周大鹏.制造业服务化对产业转型升级的影响[J].世界经济研究,2013,9:17-22。
[17]	樊秀峰、韩亚峰，2012：《生产性服务贸易对制造业生产效率影响的实证研究——基于价值链视角》，《国际经贸探索》第5期。
[18]	Markusen J. R.. Trade in producer services and in other specialized intermediate inputs [J]. The American Economic Review, 1989: 85-95.
[19]	Ginarte J C, Park W G. Determinants of patent rights: A cross-national study[J]. Research policy, 1997, 26 (3): 283-301.
[20]	Park W G. International patent protection: 1960–2005 [J]. Research policy, 2008, 37 (4): 761-766.
[21]	Weng Y, Yang C H, Huang Y J. Intellectual property rights and US information goods exports: the role of imitation threat [J]. Journal of Cultural Economics, 2009, 33 (2): 109-134.

Cite This Article

Plain Text BibTeX RIS

APA Style

Zhibin Zhang. (2016). Servitization of Manufacturer and Intellectual Property Protection——Empirical Analysis Based on the OECD Countries. Science Innovation, 4(6), 278-282. https://doi.org/10.11648/j.si.20160406.16

Copy | Download

ACS Style

Zhibin Zhang. Servitization of Manufacturer and Intellectual Property Protection——Empirical Analysis Based on the OECD Countries. Sci. Innov. 2016, 4(6), 278-282. doi: 10.11648/j.si.20160406.16

Copy | Download

AMA Style

Zhibin Zhang. Servitization of Manufacturer and Intellectual Property Protection——Empirical Analysis Based on the OECD Countries. Sci Innov. 2016;4(6):278-282. doi: 10.11648/j.si.20160406.16

Copy | Download

@article{10.11648/j.si.20160406.16,
  author = {Zhibin Zhang},
  title = {Servitization of Manufacturer and Intellectual Property Protection——Empirical Analysis Based on the OECD Countries},
  journal = {Science Innovation},
  volume = {4},
  number = {6},
  pages = {278-282},
  doi = {10.11648/j.si.20160406.16},
  url = {https://doi.org/10.11648/j.si.20160406.16},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.si.20160406.16},
  abstract = {In this paper, through using the OECD (Organization for Economic Co-operation and Development) data and comparing with Chinese data, the result shows that the overall, labor-intensive, capital-intensive and technology-intensive manufacure of China all have low servitization degree, which results the Chinese manufature stays in the low stage of the global value chain. At the same time, the empirical analysis on the level of intellectual property protection and the servitization of manufacture shows that the improvement of intellectual property protection can contribute to the integration of manufacturing and service, and this role in technology-intensive manufacturing is more obvious. This study also finds that the proportion of employment in service sector, the competitiveness of manufacture will positively promote the overall and different factors intensive manufacturing servitization degrees, while the level of innovation and economic freedom will inhibit the servitization of manufacture.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Servitization of Manufacturer and Intellectual Property Protection——Empirical Analysis Based on the OECD Countries
AU  - Zhibin Zhang
Y1  - 2016/12/07
PY  - 2016
N1  - https://doi.org/10.11648/j.si.20160406.16
DO  - 10.11648/j.si.20160406.16
T2  - Science Innovation
JF  - Science Innovation
JO  - Science Innovation
SP  - 278
EP  - 282
PB  - Science Publishing Group
SN  - 2328-787X
UR  - https://doi.org/10.11648/j.si.20160406.16
AB  - In this paper, through using the OECD (Organization for Economic Co-operation and Development) data and comparing with Chinese data, the result shows that the overall, labor-intensive, capital-intensive and technology-intensive manufacure of China all have low servitization degree, which results the Chinese manufature stays in the low stage of the global value chain. At the same time, the empirical analysis on the level of intellectual property protection and the servitization of manufacture shows that the improvement of intellectual property protection can contribute to the integration of manufacturing and service, and this role in technology-intensive manufacturing is more obvious. This study also finds that the proportion of employment in service sector, the competitiveness of manufacture will positively promote the overall and different factors intensive manufacturing servitization degrees, while the level of innovation and economic freedom will inhibit the servitization of manufacture.
VL  - 4
IS  - 6
ER  -

Copy | Download

Author Information

Zhibin Zhang

Economic Department, Shanghai University, Shanghai, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Zhibin Zhang. (2016). Servitization of Manufacturer and Intellectual Property Protection——Empirical Analysis Based on the OECD Countries. Science Innovation, 4(6), 278-282. https://doi.org/10.11648/j.si.20160406.16

Copy | Download

ACS Style

Zhibin Zhang. Servitization of Manufacturer and Intellectual Property Protection——Empirical Analysis Based on the OECD Countries. Sci. Innov. 2016, 4(6), 278-282. doi: 10.11648/j.si.20160406.16

Copy | Download

AMA Style

Zhibin Zhang. Servitization of Manufacturer and Intellectual Property Protection——Empirical Analysis Based on the OECD Countries. Sci Innov. 2016;4(6):278-282. doi: 10.11648/j.si.20160406.16

Copy | Download

@article{10.11648/j.si.20160406.16,
  author = {Zhibin Zhang},
  title = {Servitization of Manufacturer and Intellectual Property Protection——Empirical Analysis Based on the OECD Countries},
  journal = {Science Innovation},
  volume = {4},
  number = {6},
  pages = {278-282},
  doi = {10.11648/j.si.20160406.16},
  url = {https://doi.org/10.11648/j.si.20160406.16},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.si.20160406.16},
  abstract = {In this paper, through using the OECD (Organization for Economic Co-operation and Development) data and comparing with Chinese data, the result shows that the overall, labor-intensive, capital-intensive and technology-intensive manufacure of China all have low servitization degree, which results the Chinese manufature stays in the low stage of the global value chain. At the same time, the empirical analysis on the level of intellectual property protection and the servitization of manufacture shows that the improvement of intellectual property protection can contribute to the integration of manufacturing and service, and this role in technology-intensive manufacturing is more obvious. This study also finds that the proportion of employment in service sector, the competitiveness of manufacture will positively promote the overall and different factors intensive manufacturing servitization degrees, while the level of innovation and economic freedom will inhibit the servitization of manufacture.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Servitization of Manufacturer and Intellectual Property Protection——Empirical Analysis Based on the OECD Countries
AU  - Zhibin Zhang
Y1  - 2016/12/07
PY  - 2016
N1  - https://doi.org/10.11648/j.si.20160406.16
DO  - 10.11648/j.si.20160406.16
T2  - Science Innovation
JF  - Science Innovation
JO  - Science Innovation
SP  - 278
EP  - 282
PB  - Science Publishing Group
SN  - 2328-787X
UR  - https://doi.org/10.11648/j.si.20160406.16
AB  - In this paper, through using the OECD (Organization for Economic Co-operation and Development) data and comparing with Chinese data, the result shows that the overall, labor-intensive, capital-intensive and technology-intensive manufacure of China all have low servitization degree, which results the Chinese manufature stays in the low stage of the global value chain. At the same time, the empirical analysis on the level of intellectual property protection and the servitization of manufacture shows that the improvement of intellectual property protection can contribute to the integration of manufacturing and service, and this role in technology-intensive manufacturing is more obvious. This study also finds that the proportion of employment in service sector, the competitiveness of manufacture will positively promote the overall and different factors intensive manufacturing servitization degrees, while the level of innovation and economic freedom will inhibit the servitization of manufacture.
VL  - 4
IS  - 6
ER  -

Copy | Download