Preparation and Characterization of Thin Conductive Nanocomposite Film from Dispersed Multiwall Carbon Nanotubes Reinforced Chitosan/Polyvinyl Alcohol Blend
Volume 7, Issue 6, December 2019, Pages: 78-84
Received: May 27, 2019;
Accepted: Oct. 26, 2019;
Published: Nov. 5, 2019
Views 325 Downloads 107
Fatema Tuz Zohora, Department of Applied Chemistry and Chemical Engineering, University of Dhaka, Dhaka, Bangladesh
Md. Sazedul Islam, Department of Applied Chemistry and Chemical Engineering, University of Dhaka, Dhaka, Bangladesh
Muhammad Shahriar Bashar, Institute of Fuel Research & Development (IFRD), Bangladesh Council of Scientific and Industrial Research (BCSIR), Dhaka, Bangladesh
Papia Haque, Department of Applied Chemistry and Chemical Engineering, University of Dhaka, Dhaka, Bangladesh
Mohammed Mizanur Rahman, Department of Applied Chemistry and Chemical Engineering, University of Dhaka, Dhaka, Bangladesh
In this study, surfactant dispersed MWCNTs were introduced as nanofillers into poly (vinyl) alcohol (PVA) and Chitosan (Cs) blend (ratio 50:50 wt%, optimized) by solution casting method to fabricate PVA/Cs/MWCNTs nanocomposite films. These nanocomposites were subjected to different characterization to study the variation of properties with different amount of MWCNTs loading. Various techniques, such as Optical microscopy (OM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA, DTGA), differential scanning calorimetry (DSC), impedance analyzer (IA), scanning electron microscopy (SEM) and universal testing machine (UTM) were used to study the physicochemical, morphological, electrical and thermo-mechanical properties of the nanocomposite films. The experimental results of FTIR illustrated that strong interaction among MWCNTs, Cs and PVA facilitated the crystallization of PVA and prevented the agglomeration of MWCNTs in the composite film. Tensile strength of the nanocomposite containing 1 wt% MWCNTs increased by 61.51% and elongation at break decreased by 20.07% in comparison to that of pure PVA/Cs blend film. Similarly, the conductivity of the nanocomposite containing 1 wt% MWCNTs was highest at 40V with the value of 1.99 x 103 S/cm.
Fatema Tuz Zohora,
Md. Sazedul Islam,
Muhammad Shahriar Bashar,
Mohammed Mizanur Rahman,
Preparation and Characterization of Thin Conductive Nanocomposite Film from Dispersed Multiwall Carbon Nanotubes Reinforced Chitosan/Polyvinyl Alcohol Blend, Science Research.
Vol. 7, No. 6,
2019, pp. 78-84.
Coelho, C., et al., Functionalisation of polybutylene succinate nanocomposites: from structure to reinforcement of UV-absorbing and mechanical properties. Rsc Advances, 2012. 2 (12): p. 5430-5438.
Petersson, M. and M. Stading, Water vapour permeability and mechanical properties of mixed starch-monoglyceride films and effect of film forming conditions. Food Hydrocolloids, 2005. 19 (1): p. 123-132.
Wu, H., et al., Preparation and characterization of chitosan/α‐zirconium phosphate nanocomposite films. Polymer International, 2010. 59 (7): p. 923-930.
Utracki, L., Polymeric nanocomposites: compounding and performance. Journal of nanoscience and nanotechnology, 2008. 8 (4): p. 1582-1596.
Barlow, J. and D. Paul, Polymer blends and alloys—a review of selected considerations. Polymer Engineering & Science, 1981. 21 (15): p. 985-996.
Vasile, C., Environmentally degradable materials based on multicomponent polymeric systems. 2009: CRC Press.
Paiva, M., et al., Mechanical and morphological characterization of polymer–carbon nanocomposites from functionalized carbon nanotubes. Carbon, 2004. 42 (14): p. 2849-2854.
Bhat, A. and A. Banthia, Preparation and characterization of poly (vinyl alcohol)-modified red mud composite materials. Journal of applied polymer science, 2007. 103 (1): p. 238-243.
Ajayan, P. M., et al., Single-walled carbon nanotube–polymer composites: strength and weakness. Advanced materials, 2000. 12 (10): p. 750-753.
Wang, S.-F., et al., Preparation and mechanical properties of chitosan/carbon nanotubes composites. Biomacromolecules, 2005. 6 (6): p. 3067-3072.
Adsul, M. G., D. A. Rey, and D. V. Gokhale, Combined strategy for the dispersion/dissolution of single walled carbon nanotubes and cellulose in water. Journal of Materials Chemistry, 2011. 21 (7): p. 2054-2056.
Rastogi, R., et al., Comparative study of carbon nanotube dispersion using surfactants. Journal of colloid and interface science, 2008. 328 (2): p. 421-428.
Wang, X., et al., Fabrication of ultralong and electrically uniform single-walled carbon nanotubes on clean substrates. Nano letters, 2009. 9 (9): p. 3137-3141.
Gil, E. S. and S. M. Hudson, Stimuli-reponsive polymers and their bioconjugates. Progress in polymer science, 2004. 29 (12): p. 1173-1222.
Domszy, J. G. and G. A. Roberts, Evaluation of infrared spectroscopic techniques for analysing chitosan. Die Makromolekulare Chemie: Macromolecular Chemistry and Physics, 1985. 186 (8): p. 1671-1677.
Rashid, T. U., et al., A new approach for the preparation of chitosan from γ-irradiation of prawn shell: effects of radiation on the characteristics of chitosan. Polymer International, 2012. 61 (8): p. 1302-1308.
Liu, J.-F. and W. A. Ducker, Self-assembled supramolecular structures of charged polymers at the graphite/liquid interface. Langmuir, 2000. 16 (7): p. 3467-3473.
Chuang, W.-Y., et al., Properties of the poly (vinyl alcohol) /chitosan blend and its effect on the culture of fibroblast in vitro. Biomaterials, 1999. 20 (16): p. 1479-1487.
Srinivasa, P., et al., Properties and sorption studies of chitosan–polyvinyl alcohol blend films. Carbohydrate Polymers, 2003. 53 (4): p. 431-438.
Zhang, X., et al., Poly (vinyl alcohol) /SWNT composite film. Nano letters, 2003. 3 (9): p. 1285-1288.
Minus, M. L., H. G. Chae, and S. Kumar, Single wall carbon nanotube templated oriented crystallization of poly (vinyl alcohol). Polymer, 2006. 47 (11): p. 3705-3710.
Coleman, J. N., et al., Reinforcement of polymers with carbon nanotubes. The role of an ordered polymer interfacial region. Experiment and modeling. Polymer, 2006. 47 (26): p. 8556-8561.