A Modeling Programming Used OOP for Lattice Boom

Qin Yi-xiao; Zhang Li; Wang Tong-zun

doi:doi:10.11648/j.sd.20160405.11

| Peer-Reviewed

A Modeling Programming Used OOP for Lattice Boom

Qin Yi-xiao, Zhang Li, Wang Tong-zun

Published in Science Discovery (Volume 4, Issue 5)

Received: 21 July 2016 Accepted: 2 August 2016 Published: 25 August 2016

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The combined jib of a crane is a complex system, its mechanical analysis modeling is difficult, and the efficiency is low. In this regard, it is researched that the object-oriented programming technique is applied to truss crane jib modeling. Proposing a generic modular truss jibs modeling based on parametric modeling for rapid modeling method and providing a new method for truss boom system simulation design is necessary. The development and design of truss boom system time can be greatly reduced by using the modeling method in the paper. The design efficiency can be improved significantly. This paper takes the VisualBasic as the programming platform making the truss boom of the all-terrain crane as an example to verify the effectiveness of the new modeling method.

Published in	Science Discovery (Volume 4, Issue 5)
DOI	10.11648/j.sd.20160405.11
Page(s)	270-274
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Complex Lattice Boom Structure, Mechanical Analysis Modeling, Parameterization, Modularization Programming, Object-Oriented Programming

References

[1]	Maedo, Teppei; Ichikawa, Yasuo. Weight and width reductions of Latticed Boom Crawler Cranes [J]. Research and Development Kobe Steel Engineering Reports, 2012, 8 (62): 41-44.
[2]	Congqian Qi, Qingyao Cui. Research on Design Method Based on Parametric Technology [J]. Mechanical Design and Research 2002. 18 (5): 13-15.
[3]	Sandip D. Shinde. Standardization of Jib Crane Design by “F. E. M. Rules” And Parametric Modeling [J]. International Journal of Recent Trends in Engineering, 2009, May: 145-149.
[4]	Choi Won, Lee Jeongjae, Yoon Seongsoo. Regular truss structure model equivalent to continuum structure [J]. International Journal of Agricultural and Biological Engineering, 2015, 8 (5): 151-161.
[5]	Yifan Jia, Yundong Peng, Hua Jiang. 3D fine modeling method in large and complex steel truss bridge [J]. Applied Mechanics and Materials, 2014, 501-504: 1408-1412.
[6]	Chunyu Li. Computer graphics and the use of programming techniques [M]. Beijing University of Aeronautics and Astronautics Press. 2009.
[7]	Dušan Kovačević, Slobodan Ranković. Fem Modeling Of Spatial Structural Systems In Evaluation Of The Real Structural Performances [J]. Architecture and Civil Engineering, 2011, 9: 347-356.
[8]	Fuhai Cai, Fuling Zhao, Xin Wang, Liming Chen. Research on residual fatigue life model for lattice boom of the crane in-service [J]. Advanced Materials Research, 2014, 875-877: 1087-1094.
[9]	Jinping Li, Shengjie Jiao, Jiwen Peng, Xinxin Xu, Jun Zhang, Hairong Gu. Structural reliability analysis of crawler crane's boom [J]. Journal of Chang'an University (Natural Science Edition), 2015, 35 (4): 153-158.
[10]	Fang Shi. secondary development and application examples [M], China Water Conservancy and Hydropower Publishing House, 2012.
[11]	G. S. Payette, J. N. Reddy. A Nonlinear Finite Element Framework for Viscoelastic Beams Based on the High-Order Reddy Beam Theory [J]. Journal of Engineering Materials and Technology, 2013, 1 (135): 1-11.

Cite This Article

Plain Text BibTeX RIS

APA Style

Qin Yi-xiao, Zhang Li, Wang Tong-zun. (2016). A Modeling Programming Used OOP for Lattice Boom. Science Discovery, 4(5), 270-274. https://doi.org/10.11648/j.sd.20160405.11

Copy | Download

ACS Style

Qin Yi-xiao; Zhang Li; Wang Tong-zun. A Modeling Programming Used OOP for Lattice Boom. Sci. Discov. 2016, 4(5), 270-274. doi: 10.11648/j.sd.20160405.11

Copy | Download

AMA Style

Qin Yi-xiao, Zhang Li, Wang Tong-zun. A Modeling Programming Used OOP for Lattice Boom. Sci Discov. 2016;4(5):270-274. doi: 10.11648/j.sd.20160405.11

Copy | Download

@article{10.11648/j.sd.20160405.11,
  author = {Qin Yi-xiao and Zhang Li and Wang Tong-zun},
  title = {A Modeling Programming Used OOP for Lattice Boom},
  journal = {Science Discovery},
  volume = {4},
  number = {5},
  pages = {270-274},
  doi = {10.11648/j.sd.20160405.11},
  url = {https://doi.org/10.11648/j.sd.20160405.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20160405.11},
  abstract = {The combined jib of a crane is a complex system, its mechanical analysis modeling is difficult, and the efficiency is low. In this regard, it is researched that the object-oriented programming technique is applied to truss crane jib modeling. Proposing a generic modular truss jibs modeling based on parametric modeling for rapid modeling method and providing a new method for truss boom system simulation design is necessary. The development and design of truss boom system time can be greatly reduced by using the modeling method in the paper. The design efficiency can be improved significantly. This paper takes the VisualBasic as the programming platform making the truss boom of the all-terrain crane as an example to verify the effectiveness of the new modeling method.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - A Modeling Programming Used OOP for Lattice Boom
AU  - Qin Yi-xiao
AU  - Zhang Li
AU  - Wang Tong-zun
Y1  - 2016/08/25
PY  - 2016
N1  - https://doi.org/10.11648/j.sd.20160405.11
DO  - 10.11648/j.sd.20160405.11
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 270
EP  - 274
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20160405.11
AB  - The combined jib of a crane is a complex system, its mechanical analysis modeling is difficult, and the efficiency is low. In this regard, it is researched that the object-oriented programming technique is applied to truss crane jib modeling. Proposing a generic modular truss jibs modeling based on parametric modeling for rapid modeling method and providing a new method for truss boom system simulation design is necessary. The development and design of truss boom system time can be greatly reduced by using the modeling method in the paper. The design efficiency can be improved significantly. This paper takes the VisualBasic as the programming platform making the truss boom of the all-terrain crane as an example to verify the effectiveness of the new modeling method.
VL  - 4
IS  - 5
ER  -

Copy | Download

Author Information

Qin Yi-xiao

School of Mechanical Engineering, Taiyuan University of Science and Technology, Taiyuan, China
Zhang Li

School of Mechanical Engineering, Taiyuan University of Science and Technology, Taiyuan, China
Wang Tong-zun

School of Mechanical Engineering, Taiyuan University of Science and Technology, Taiyuan, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Qin Yi-xiao, Zhang Li, Wang Tong-zun. (2016). A Modeling Programming Used OOP for Lattice Boom. Science Discovery, 4(5), 270-274. https://doi.org/10.11648/j.sd.20160405.11

Copy | Download

ACS Style

Qin Yi-xiao; Zhang Li; Wang Tong-zun. A Modeling Programming Used OOP for Lattice Boom. Sci. Discov. 2016, 4(5), 270-274. doi: 10.11648/j.sd.20160405.11

Copy | Download

AMA Style

Qin Yi-xiao, Zhang Li, Wang Tong-zun. A Modeling Programming Used OOP for Lattice Boom. Sci Discov. 2016;4(5):270-274. doi: 10.11648/j.sd.20160405.11

Copy | Download

@article{10.11648/j.sd.20160405.11,
  author = {Qin Yi-xiao and Zhang Li and Wang Tong-zun},
  title = {A Modeling Programming Used OOP for Lattice Boom},
  journal = {Science Discovery},
  volume = {4},
  number = {5},
  pages = {270-274},
  doi = {10.11648/j.sd.20160405.11},
  url = {https://doi.org/10.11648/j.sd.20160405.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20160405.11},
  abstract = {The combined jib of a crane is a complex system, its mechanical analysis modeling is difficult, and the efficiency is low. In this regard, it is researched that the object-oriented programming technique is applied to truss crane jib modeling. Proposing a generic modular truss jibs modeling based on parametric modeling for rapid modeling method and providing a new method for truss boom system simulation design is necessary. The development and design of truss boom system time can be greatly reduced by using the modeling method in the paper. The design efficiency can be improved significantly. This paper takes the VisualBasic as the programming platform making the truss boom of the all-terrain crane as an example to verify the effectiveness of the new modeling method.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - A Modeling Programming Used OOP for Lattice Boom
AU  - Qin Yi-xiao
AU  - Zhang Li
AU  - Wang Tong-zun
Y1  - 2016/08/25
PY  - 2016
N1  - https://doi.org/10.11648/j.sd.20160405.11
DO  - 10.11648/j.sd.20160405.11
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 270
EP  - 274
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20160405.11
AB  - The combined jib of a crane is a complex system, its mechanical analysis modeling is difficult, and the efficiency is low. In this regard, it is researched that the object-oriented programming technique is applied to truss crane jib modeling. Proposing a generic modular truss jibs modeling based on parametric modeling for rapid modeling method and providing a new method for truss boom system simulation design is necessary. The development and design of truss boom system time can be greatly reduced by using the modeling method in the paper. The design efficiency can be improved significantly. This paper takes the VisualBasic as the programming platform making the truss boom of the all-terrain crane as an example to verify the effectiveness of the new modeling method.
VL  - 4
IS  - 5
ER  -

Copy | Download