An New Automatic Connection and Separaton Device for Modularized and Fast Combined Interstage

Zhou Bei; Hui Junpeng; Zeng Liang

doi:doi:10.11648/j.sd.20180605.16

| Peer-Reviewed

An New Automatic Connection and Separaton Device for Modularized and Fast Combined Interstage

Zhou Bei, Hui Junpeng, Zeng Liang

Published in Science Discovery (Volume 6, Issue 5)

Received: 17 October 2018 Accepted: Published: 18 October 2018

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The assembling time of traditional spacecraft’s main connecting sections is long and separation structure of interstage can only be used once, which can’t meet the needs for modularization ,fast combination ,little impact force and reuse .This thesis proposed a new automatic connection and sepearation device ,which not only meet the demands above but also integrate the connection device and separation device. Software Pro/engineer is used to design the device’s structure and software Ansys is used to analyze the strength. The results show that the structure schreme is reasonable ,the device can realize fast combination,little impact force and reuse,and the device can meet the requirements of load and small radial room.

Published in	Science Discovery (Volume 6, Issue 5)
DOI	10.11648/j.sd.20180605.16
Page(s)	344-352
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Spacecraft, Cabin, Connection, Seperation, Automatic

References

[1]	王振威.基于两瓣式分瓣螺母的冗余电机驱动型星箭分离装置的设计.哈尔滨工业大学硕士论文.2018
[2]	刘会英.冗余电机驱动型分离装置的设计与试验.机械设计与研究.2016年06期
[3]	王珊；王栋.导弹舱段间复杂连接件弯曲应力分析.战术导弹技术.2017年05期
[4]	王晓慧；樊思思.基于混合变量的导弹舱段径向连接结构综合优化设计.固体火箭技术.2015年06期
[5]	邱凯；曹鲁光等.导弹关键舱段螺栓联接的有限元分析及预紧力研究.机械设计与制造.2015年02期
[6]	易龙；彭云等.基于APDL的圆截面舱段楔块连接结构全接触分析技术研究.南昌航空大学学报(自然科学版).2017年01期
[7]	任凯；洪春凤.纯水冷却设备中的电动连杆机构设计.山东化工.2018年01期
[8]	叶耀坤；刘天雄等.航天火工连接分离机构设计技术研究.载人航天.2016年01期
[9]	杨国军；杨桂林等,面向冗余驱动的自适应柔性连接机构优化设计.制造业自动化.2015年13期
[10]	唐杰；康士朋等.微纳卫星标准接口连接分离机构技术研究.国际太空.2016年08期
[11]	吴少杰.某增压机型曲柄连杆机构优化设计.华南理工大学.2017年 02期

Cite This Article

Plain Text BibTeX RIS

APA Style

Zhou Bei, Hui Junpeng, Zeng Liang. (2018). An New Automatic Connection and Separaton Device for Modularized and Fast Combined Interstage. Science Discovery, 6(5), 344-352. https://doi.org/10.11648/j.sd.20180605.16

Copy | Download

ACS Style

Zhou Bei; Hui Junpeng; Zeng Liang. An New Automatic Connection and Separaton Device for Modularized and Fast Combined Interstage. Sci. Discov. 2018, 6(5), 344-352. doi: 10.11648/j.sd.20180605.16

Copy | Download

AMA Style

Zhou Bei, Hui Junpeng, Zeng Liang. An New Automatic Connection and Separaton Device for Modularized and Fast Combined Interstage. Sci Discov. 2018;6(5):344-352. doi: 10.11648/j.sd.20180605.16

Copy | Download

@article{10.11648/j.sd.20180605.16,
  author = {Zhou Bei and Hui Junpeng and Zeng Liang},
  title = {An New Automatic Connection and Separaton Device for Modularized and Fast Combined Interstage},
  journal = {Science Discovery},
  volume = {6},
  number = {5},
  pages = {344-352},
  doi = {10.11648/j.sd.20180605.16},
  url = {https://doi.org/10.11648/j.sd.20180605.16},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20180605.16},
  abstract = {The assembling time of traditional spacecraft’s main connecting sections is long and separation structure of interstage can only be used once, which can’t meet the needs for modularization ,fast combination ,little impact  force and reuse .This thesis proposed a new automatic connection and sepearation device ,which not only meet the demands above but also integrate the connection device and separation device. Software Pro/engineer is used to design the device’s structure and software Ansys is used to analyze the strength. The results show that the structure schreme is reasonable ,the device can realize fast combination,little impact force and reuse,and the device can meet the requirements of load and small radial room.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - An New Automatic Connection and Separaton Device for Modularized and Fast Combined Interstage
AU  - Zhou Bei
AU  - Hui Junpeng
AU  - Zeng Liang
Y1  - 2018/10/18
PY  - 2018
N1  - https://doi.org/10.11648/j.sd.20180605.16
DO  - 10.11648/j.sd.20180605.16
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 344
EP  - 352
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20180605.16
AB  - The assembling time of traditional spacecraft’s main connecting sections is long and separation structure of interstage can only be used once, which can’t meet the needs for modularization ,fast combination ,little impact  force and reuse .This thesis proposed a new automatic connection and sepearation device ,which not only meet the demands above but also integrate the connection device and separation device. Software Pro/engineer is used to design the device’s structure and software Ansys is used to analyze the strength. The results show that the structure schreme is reasonable ,the device can realize fast combination,little impact force and reuse,and the device can meet the requirements of load and small radial room.
VL  - 6
IS  - 5
ER  -

Copy | Download

Author Information

Zhou Bei

China Academy of Launch Vehicle Technology, Beijing, China
Hui Junpeng

China Academy of Launch Vehicle Technology, Beijing, China
Zeng Liang

China Academy of Launch Vehicle Technology, Beijing, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Zhou Bei, Hui Junpeng, Zeng Liang. (2018). An New Automatic Connection and Separaton Device for Modularized and Fast Combined Interstage. Science Discovery, 6(5), 344-352. https://doi.org/10.11648/j.sd.20180605.16

Copy | Download

ACS Style

Zhou Bei; Hui Junpeng; Zeng Liang. An New Automatic Connection and Separaton Device for Modularized and Fast Combined Interstage. Sci. Discov. 2018, 6(5), 344-352. doi: 10.11648/j.sd.20180605.16

Copy | Download

AMA Style

Zhou Bei, Hui Junpeng, Zeng Liang. An New Automatic Connection and Separaton Device for Modularized and Fast Combined Interstage. Sci Discov. 2018;6(5):344-352. doi: 10.11648/j.sd.20180605.16

Copy | Download

@article{10.11648/j.sd.20180605.16,
  author = {Zhou Bei and Hui Junpeng and Zeng Liang},
  title = {An New Automatic Connection and Separaton Device for Modularized and Fast Combined Interstage},
  journal = {Science Discovery},
  volume = {6},
  number = {5},
  pages = {344-352},
  doi = {10.11648/j.sd.20180605.16},
  url = {https://doi.org/10.11648/j.sd.20180605.16},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20180605.16},
  abstract = {The assembling time of traditional spacecraft’s main connecting sections is long and separation structure of interstage can only be used once, which can’t meet the needs for modularization ,fast combination ,little impact  force and reuse .This thesis proposed a new automatic connection and sepearation device ,which not only meet the demands above but also integrate the connection device and separation device. Software Pro/engineer is used to design the device’s structure and software Ansys is used to analyze the strength. The results show that the structure schreme is reasonable ,the device can realize fast combination,little impact force and reuse,and the device can meet the requirements of load and small radial room.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - An New Automatic Connection and Separaton Device for Modularized and Fast Combined Interstage
AU  - Zhou Bei
AU  - Hui Junpeng
AU  - Zeng Liang
Y1  - 2018/10/18
PY  - 2018
N1  - https://doi.org/10.11648/j.sd.20180605.16
DO  - 10.11648/j.sd.20180605.16
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 344
EP  - 352
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20180605.16
AB  - The assembling time of traditional spacecraft’s main connecting sections is long and separation structure of interstage can only be used once, which can’t meet the needs for modularization ,fast combination ,little impact  force and reuse .This thesis proposed a new automatic connection and sepearation device ,which not only meet the demands above but also integrate the connection device and separation device. Software Pro/engineer is used to design the device’s structure and software Ansys is used to analyze the strength. The results show that the structure schreme is reasonable ,the device can realize fast combination,little impact force and reuse,and the device can meet the requirements of load and small radial room.
VL  - 6
IS  - 5
ER  -

Copy | Download