Research on Hybrid Simulation Test Method for Cooperative Deformation of Membrane and Frame Composite Structures

Yu Yangchun; Xu Xiaochen; Xu Zhihong

doi:doi:10.11648/j.sd.20190705.27

| Peer-Reviewed

Research on Hybrid Simulation Test Method for Cooperative Deformation of Membrane and Frame Composite Structures

Yu Yangchun, Xu Xiaochen, Xu Zhihong

Published in Science Discovery (Volume 7, Issue 5)

Received: 26 October 2019 Accepted: Published: 3 December 2019

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In this paper, based on the joint laboratory of Mechanics Test Center of Nanjing University of Science and Technology and Walter+Bai, the PTFE coated fabric film material is taken as the test object, and the A/D signal exchange between the numerical substructure and the experimental substructure is realized by PMI serial port program, and the hybrid simulation static test is carried out. The phenomenon that the supporting structure of the frame is deformed due to the interaction in the tension process of the membrane structure is simulated, and then the unloading effect on the membrane surface is produced. The test results show that the communication performance of PMI serial port program is good, and the time consumption produced by signal exchange process can be ignored. The accuracy and stability of the hybrid simulation test system are verified by comparing the mixed simulation test results with the pure numerical simulation theoretical solution. Through the comprehensive analysis of the test data such as stress, strain, displacement, loading and unloading times, some suggestions are put forward for the design of membrane and frame composite structure.

Published in	Science Discovery (Volume 7, Issue 5)
DOI	10.11648/j.sd.20190705.27
Page(s)	359-364
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

PMI, Sub-structure, Hybrid Simulation, Unloading Effect, Composite Structure

References

[1]	蒋泽峰. 张拉膜结构的全过程设计及找形分析[D]. 北京：清华大学，2000.
[2]	段有恒. 索膜结构张拉及加载全过程仿真分析研究[D]. 北京：北京交通大学，2012.
[3]	邱鹏. 空间网格结构滑移法施工全过程分析方法及若干关键问题的研究[D]. 杭州：浙江大学，2006.
[4]	李永祥. 考虑弹性支承的整体张拉膜结构力学性能研究[D]. 兰州：兰州理工大学，2008.
[5]	郝海莉. 基于MTS试验系统的空间SRT混合仿真试验方法研究[D]. 西安：西安建筑科技大学，2015.
[6]	章红梅，曾松，段元锋，等. 实时混合试验方法研究与应用综述[J]. 结构工程师，2015,31(1):207-212.
[7]	Shao X, Enyant G. Development of a versatile hybrid testing system for seismic experimentation [J]. Experimental Techniques, 2015, 38 (6): 44-60.
[8]	Schellenberg A, Kim H K, Takahashi Y, et al. OpenFresco command language manual [M]. Berkeley, US: The Regents of the University of California, 2009.
[9]	张祁，董成，徐志洪. 含粘弹性阻尼器结构的实时混合仿真研究[J]. 南京理工大学学报，2017，41(5):623-626+633.
[10]	董成. 含速度相关型阻尼器的结构混合仿真研究[D]. 南京：南京理工大学，2017.
[11]	曹志威，徐志洪，张祁，等. 带粘弹性阻尼器的斜拉索动力混合仿真[J]. 华北地震科学，2017,35(2):66-69.
[12]	刘振邦，张祁，徐志洪. 含非线性拉杆的拱结构的混合仿真研究[J]. 南京理工大学学报，2018，42(5):547-551.
[13]	Walter+Bai公司生产的LFV-10型电液伺服多功能试验机说明书.
[14]	张祁. 带粘弹性阻尼器框架结构的混合仿真若干问题的研究[D]. 南京：南京理工大学，2018.
[15]	Ge Yang, Bin Wu, Ge Ou, Zhen Wang, Shirley Dyke. HyTest: Platform for Structural Hybrid Simulations with Finite Element Model Updating [J]. Advances in Engineering Software, 2017, 112: 200-210.
[16]	陈建稳，陈务军，张大旭. PVDF/PES涂层织物循环拉伸力学性能及弹性模量[J]. 华南理工大学学报（自然科学版）,2013,41(6):69-76.

Cite This Article

Plain Text BibTeX RIS

APA Style

Yu Yangchun, Xu Xiaochen, Xu Zhihong. (2019). Research on Hybrid Simulation Test Method for Cooperative Deformation of Membrane and Frame Composite Structures. Science Discovery, 7(5), 359-364. https://doi.org/10.11648/j.sd.20190705.27

Copy | Download

ACS Style

Yu Yangchun; Xu Xiaochen; Xu Zhihong. Research on Hybrid Simulation Test Method for Cooperative Deformation of Membrane and Frame Composite Structures. Sci. Discov. 2019, 7(5), 359-364. doi: 10.11648/j.sd.20190705.27

Copy | Download

AMA Style

Yu Yangchun, Xu Xiaochen, Xu Zhihong. Research on Hybrid Simulation Test Method for Cooperative Deformation of Membrane and Frame Composite Structures. Sci Discov. 2019;7(5):359-364. doi: 10.11648/j.sd.20190705.27

Copy | Download

@article{10.11648/j.sd.20190705.27,
  author = {Yu Yangchun and Xu Xiaochen and Xu Zhihong},
  title = {Research on Hybrid Simulation Test Method for Cooperative Deformation of Membrane and Frame Composite Structures},
  journal = {Science Discovery},
  volume = {7},
  number = {5},
  pages = {359-364},
  doi = {10.11648/j.sd.20190705.27},
  url = {https://doi.org/10.11648/j.sd.20190705.27},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20190705.27},
  abstract = {In this paper, based on the joint laboratory of Mechanics Test Center of Nanjing University of Science and Technology and Walter+Bai, the PTFE coated fabric film material is taken as the test object, and the A/D signal exchange between the numerical substructure and the experimental substructure is realized by PMI serial port program, and the hybrid simulation static test is carried out. The phenomenon that the supporting structure of the frame is deformed due to the interaction in the tension process of the membrane structure is simulated, and then the unloading effect on the membrane surface is produced. The test results show that the communication performance of PMI serial port program is good, and the time consumption produced by signal exchange process can be ignored. The accuracy and stability of the hybrid simulation test system are verified by comparing the mixed simulation test results with the pure numerical simulation theoretical solution. Through the comprehensive analysis of the test data such as stress, strain, displacement, loading and unloading times, some suggestions are put forward for the design of membrane and frame composite structure.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Research on Hybrid Simulation Test Method for Cooperative Deformation of Membrane and Frame Composite Structures
AU  - Yu Yangchun
AU  - Xu Xiaochen
AU  - Xu Zhihong
Y1  - 2019/12/03
PY  - 2019
N1  - https://doi.org/10.11648/j.sd.20190705.27
DO  - 10.11648/j.sd.20190705.27
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 359
EP  - 364
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20190705.27
AB  - In this paper, based on the joint laboratory of Mechanics Test Center of Nanjing University of Science and Technology and Walter+Bai, the PTFE coated fabric film material is taken as the test object, and the A/D signal exchange between the numerical substructure and the experimental substructure is realized by PMI serial port program, and the hybrid simulation static test is carried out. The phenomenon that the supporting structure of the frame is deformed due to the interaction in the tension process of the membrane structure is simulated, and then the unloading effect on the membrane surface is produced. The test results show that the communication performance of PMI serial port program is good, and the time consumption produced by signal exchange process can be ignored. The accuracy and stability of the hybrid simulation test system are verified by comparing the mixed simulation test results with the pure numerical simulation theoretical solution. Through the comprehensive analysis of the test data such as stress, strain, displacement, loading and unloading times, some suggestions are put forward for the design of membrane and frame composite structure.
VL  - 7
IS  - 5
ER  -

Copy | Download

Author Information

Yu Yangchun

Science School, Nanjing University of Science and Technology, Nanjing, China
Xu Xiaochen

Nanjing Institute of Electronic Technology, Nanjing, China
Xu Zhihong

Science School, Nanjing University of Science and Technology, Nanjing, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Yu Yangchun, Xu Xiaochen, Xu Zhihong. (2019). Research on Hybrid Simulation Test Method for Cooperative Deformation of Membrane and Frame Composite Structures. Science Discovery, 7(5), 359-364. https://doi.org/10.11648/j.sd.20190705.27

Copy | Download

ACS Style

Yu Yangchun; Xu Xiaochen; Xu Zhihong. Research on Hybrid Simulation Test Method for Cooperative Deformation of Membrane and Frame Composite Structures. Sci. Discov. 2019, 7(5), 359-364. doi: 10.11648/j.sd.20190705.27

Copy | Download

AMA Style

Yu Yangchun, Xu Xiaochen, Xu Zhihong. Research on Hybrid Simulation Test Method for Cooperative Deformation of Membrane and Frame Composite Structures. Sci Discov. 2019;7(5):359-364. doi: 10.11648/j.sd.20190705.27

Copy | Download

@article{10.11648/j.sd.20190705.27,
  author = {Yu Yangchun and Xu Xiaochen and Xu Zhihong},
  title = {Research on Hybrid Simulation Test Method for Cooperative Deformation of Membrane and Frame Composite Structures},
  journal = {Science Discovery},
  volume = {7},
  number = {5},
  pages = {359-364},
  doi = {10.11648/j.sd.20190705.27},
  url = {https://doi.org/10.11648/j.sd.20190705.27},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20190705.27},
  abstract = {In this paper, based on the joint laboratory of Mechanics Test Center of Nanjing University of Science and Technology and Walter+Bai, the PTFE coated fabric film material is taken as the test object, and the A/D signal exchange between the numerical substructure and the experimental substructure is realized by PMI serial port program, and the hybrid simulation static test is carried out. The phenomenon that the supporting structure of the frame is deformed due to the interaction in the tension process of the membrane structure is simulated, and then the unloading effect on the membrane surface is produced. The test results show that the communication performance of PMI serial port program is good, and the time consumption produced by signal exchange process can be ignored. The accuracy and stability of the hybrid simulation test system are verified by comparing the mixed simulation test results with the pure numerical simulation theoretical solution. Through the comprehensive analysis of the test data such as stress, strain, displacement, loading and unloading times, some suggestions are put forward for the design of membrane and frame composite structure.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Research on Hybrid Simulation Test Method for Cooperative Deformation of Membrane and Frame Composite Structures
AU  - Yu Yangchun
AU  - Xu Xiaochen
AU  - Xu Zhihong
Y1  - 2019/12/03
PY  - 2019
N1  - https://doi.org/10.11648/j.sd.20190705.27
DO  - 10.11648/j.sd.20190705.27
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 359
EP  - 364
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20190705.27
AB  - In this paper, based on the joint laboratory of Mechanics Test Center of Nanjing University of Science and Technology and Walter+Bai, the PTFE coated fabric film material is taken as the test object, and the A/D signal exchange between the numerical substructure and the experimental substructure is realized by PMI serial port program, and the hybrid simulation static test is carried out. The phenomenon that the supporting structure of the frame is deformed due to the interaction in the tension process of the membrane structure is simulated, and then the unloading effect on the membrane surface is produced. The test results show that the communication performance of PMI serial port program is good, and the time consumption produced by signal exchange process can be ignored. The accuracy and stability of the hybrid simulation test system are verified by comparing the mixed simulation test results with the pure numerical simulation theoretical solution. Through the comprehensive analysis of the test data such as stress, strain, displacement, loading and unloading times, some suggestions are put forward for the design of membrane and frame composite structure.
VL  - 7
IS  - 5
ER  -

Copy | Download