Finite Element Analysis and Parameter Influence of Non-developable Ruled Surface Impeller Blade in Flank Milling
Science Discovery
Volume 8, Issue 1, February 2020, Pages: 12-17
Received: Apr. 3, 2020; Published: May 19, 2020
Views 123      Downloads 24
Authors
Yu Sun, School of Mechanical Engineering, Dalian University of Technology, Dalian, China
Lixin Cao, School of Mechanical Engineering, Dalian University of Technology, Dalian, China
Article Tools
Follow on us
Abstract
Through the cutting simulation of titanium alloy impeller blade, the effect of the actual milling processing path on the elastic part deflection to of complicated thin-walled workpiece with low rigidity and high precision is studied. Use the principle of impeller modeling to model the spline of the impeller, and the spline curve of the impeller generated in MABLEB is imported into UG for digital modeling. The spline curve is used to generate the neutral surface, and the suction surface and pressure surface are obtained by the method of non-equidistant offset. The model of the non-stretchable straight surface blade is imported into ABAQUS for static simulation. Using MATLAB to fit the experimental data in the reference literature that fits the milling process range, the side milling experience formula is fitted. Calculate the equivalent milling force corresponding to different axial cutting depths, import into ABAQUS and use Python for secondary development. By simulating the milling process through the life-and-death element method, the local elastic deformation law of the milled thin-walled parts when multi-layer milling the impeller blades is explored. The influence of different machining paths on the deformation of the tool is studied. Simulation results show that the part deflection of workpiece can be reduced by rationally planning the machining path.
Keywords
Titanium Alloy Impeller Blade, Cutting Simulation, Processing Path, Part Deflection
To cite this article
Yu Sun, Lixin Cao, Finite Element Analysis and Parameter Influence of Non-developable Ruled Surface Impeller Blade in Flank Milling, Science Discovery. Vol. 8, No. 1, 2020, pp. 12-17. doi: 10.11648/j.sd.20200801.14
Copyright
Copyright © 2020 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
ADDRESS
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
U.S.A.
Tel: (001)347-983-5186