Seismic Design of a Out-of-code High-rise Library

Ma Zefeng; Fang Lin

doi:doi:10.11648/j.sd.20200805.12

| Peer-Reviewed

Seismic Design of a Out-of-code High-rise Library

Ma Zefeng, Fang Lin

Published in Science Discovery (Volume 8, Issue 5)

Received: 11 August 2020 Accepted: Published: 23 September 2020

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In order to meet the requirements of architectural design form, a high-rise library project appeared many structural seismic designs, such as plane thin waist concave, large area floor missing, tower offset and torsion irregularity. In accordance with the principle of economy, safety and reliability, many calculation measures are adopted in the structural design, such as the comparative analysis of software SATWE and ETABS, the special calculation of floor stress level, the combining floor analysis of missing floors and the strengthening performance analysis under medium and large earthquake. At the same time, according to the structural transfinite items, the structural strengthening measures are taken, such as optimizing the structural layout, reducing the eccentricity, increasing the thickness of the floor at the weak position, and adding diagonal reinforcement in the stress concentration area. Using the above treatment, the structure can meet the fortification target under three levels.

Published in	Science Discovery (Volume 8, Issue 5)
DOI	10.11648/j.sd.20200805.12
Page(s)	83-89
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Wasp-waisted Plane, Floor Missing, Floor Slab Stress Analysis, Combining Floor Analysis

References

[1]	赵西安.楼板变形对高层建筑结构内力与位移的影响及其计算[J].建筑结构.1982(6):1~9。
[2]	焦柯,赖鸿立,胡成恩,吴桂广,袁辉,彭子祥.高层结构不规则项判别条件的探讨及建议[J].建筑结构. 2020(05). 50(10): 28~38。
[3]	黄彬辉.建筑平面不规则结构的动力特性与分析方法[J]. 建筑科技.2019(12).15~25。
[4]	仝晓嵩,罗嘉骏.平面凹凸不规则高层建筑结构弹塑性时程分析[J].建筑科学,2019(05).35(5):114~121。
[5]	何娟,刘乐乐,张先进.框-剪结构楼板局部不连续的处理方法对比分析[J].建筑结构.2019(04).49(S1):250~254。
[6]	李传运,徐术陇,王健.某竖向渐收框剪结构的设计[J].建筑结构.2018(10).48(19):31~35。
[7]	马泽峰. 地下室顶板开大洞对嵌固能力的影响[J].结构工程师. 2012(02).28(2):19~24。
[8]	谭宇胜,刘岩.凹凸不规则平面高层建筑结构设计的思考 [J].广东土木与建筑.2020(05).27(5):37~39。
[9]	许铭,陈德良,徐强,瞿才伟.武汉华侨城某超高层建筑抗震性能设计[J].建筑结构.2019(05).49(9):33~38。
[10]	张晓旭,郭天焓,刘巍,何敬天.西安万科大明宫住宅项目结构设计与分析[J].建筑结构.2019.49(S1):131~134。
[11]	中华人民共和国建设部. JGJ 3-2010 高层建筑混凝土结构技术规程[S]. 北京：中国建筑工业出版社,2010。
[12]	法扎德.奈姆.抗震设计手册[M],中国建筑出版社,2008。
[13]	黄婷婷.上海枫溪萃园平面凹凸不规则建筑超限结构分析[J].上海建设科技.2020(03):37~39。
[14]	谭宇胜,刘岩.凹凸不规则平面高层建筑结构设计的思考[J].广东土木与建筑.2020(05).27(5):37~39。
[15]	胡长青.平面不规则高层建筑结构设计分析[J].工程建设与设计.2019(07).12~14。
[16]	刘慧征. 某不规则超限高层设计研究[D].石家庄铁道大学.2019。

Cite This Article

Plain Text BibTeX RIS

APA Style

Ma Zefeng, Fang Lin. (2020). Seismic Design of a Out-of-code High-rise Library. Science Discovery, 8(5), 83-89. https://doi.org/10.11648/j.sd.20200805.12

Copy | Download

ACS Style

Ma Zefeng; Fang Lin. Seismic Design of a Out-of-code High-rise Library. Sci. Discov. 2020, 8(5), 83-89. doi: 10.11648/j.sd.20200805.12

Copy | Download

AMA Style

Ma Zefeng, Fang Lin. Seismic Design of a Out-of-code High-rise Library. Sci Discov. 2020;8(5):83-89. doi: 10.11648/j.sd.20200805.12

Copy | Download

@article{10.11648/j.sd.20200805.12,
  author = {Ma Zefeng and Fang Lin},
  title = {Seismic Design of a Out-of-code High-rise Library},
  journal = {Science Discovery},
  volume = {8},
  number = {5},
  pages = {83-89},
  doi = {10.11648/j.sd.20200805.12},
  url = {https://doi.org/10.11648/j.sd.20200805.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20200805.12},
  abstract = {In order to meet the requirements of architectural design form, a high-rise library project appeared many structural seismic designs, such as plane thin waist concave, large area floor missing, tower offset and torsion irregularity. In accordance with the principle of economy, safety and reliability, many calculation measures are adopted in the structural design, such as the comparative analysis of software SATWE and ETABS, the special calculation of floor stress level, the combining floor analysis of missing floors and the strengthening performance analysis under medium and large earthquake. At the same time, according to the structural transfinite items, the structural strengthening measures are taken, such as optimizing the structural layout, reducing the eccentricity, increasing the thickness of the floor at the weak position, and adding diagonal reinforcement in the stress concentration area. Using the above treatment, the structure can meet the fortification target under three levels.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - Seismic Design of a Out-of-code High-rise Library
AU  - Ma Zefeng
AU  - Fang Lin
Y1  - 2020/09/23
PY  - 2020
N1  - https://doi.org/10.11648/j.sd.20200805.12
DO  - 10.11648/j.sd.20200805.12
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 83
EP  - 89
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20200805.12
AB  - In order to meet the requirements of architectural design form, a high-rise library project appeared many structural seismic designs, such as plane thin waist concave, large area floor missing, tower offset and torsion irregularity. In accordance with the principle of economy, safety and reliability, many calculation measures are adopted in the structural design, such as the comparative analysis of software SATWE and ETABS, the special calculation of floor stress level, the combining floor analysis of missing floors and the strengthening performance analysis under medium and large earthquake. At the same time, according to the structural transfinite items, the structural strengthening measures are taken, such as optimizing the structural layout, reducing the eccentricity, increasing the thickness of the floor at the weak position, and adding diagonal reinforcement in the stress concentration area. Using the above treatment, the structure can meet the fortification target under three levels.
VL  - 8
IS  - 5
ER  -

Copy | Download

Author Information

Ma Zefeng

East China Architectural Design & Research Institute Co.,Ltd., Shanghai, China
Fang Lin

East China Architectural Design & Research Institute Co.,Ltd., Shanghai, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Ma Zefeng, Fang Lin. (2020). Seismic Design of a Out-of-code High-rise Library. Science Discovery, 8(5), 83-89. https://doi.org/10.11648/j.sd.20200805.12

Copy | Download

ACS Style

Ma Zefeng; Fang Lin. Seismic Design of a Out-of-code High-rise Library. Sci. Discov. 2020, 8(5), 83-89. doi: 10.11648/j.sd.20200805.12

Copy | Download

AMA Style

Ma Zefeng, Fang Lin. Seismic Design of a Out-of-code High-rise Library. Sci Discov. 2020;8(5):83-89. doi: 10.11648/j.sd.20200805.12

Copy | Download

@article{10.11648/j.sd.20200805.12,
  author = {Ma Zefeng and Fang Lin},
  title = {Seismic Design of a Out-of-code High-rise Library},
  journal = {Science Discovery},
  volume = {8},
  number = {5},
  pages = {83-89},
  doi = {10.11648/j.sd.20200805.12},
  url = {https://doi.org/10.11648/j.sd.20200805.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20200805.12},
  abstract = {In order to meet the requirements of architectural design form, a high-rise library project appeared many structural seismic designs, such as plane thin waist concave, large area floor missing, tower offset and torsion irregularity. In accordance with the principle of economy, safety and reliability, many calculation measures are adopted in the structural design, such as the comparative analysis of software SATWE and ETABS, the special calculation of floor stress level, the combining floor analysis of missing floors and the strengthening performance analysis under medium and large earthquake. At the same time, according to the structural transfinite items, the structural strengthening measures are taken, such as optimizing the structural layout, reducing the eccentricity, increasing the thickness of the floor at the weak position, and adding diagonal reinforcement in the stress concentration area. Using the above treatment, the structure can meet the fortification target under three levels.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - Seismic Design of a Out-of-code High-rise Library
AU  - Ma Zefeng
AU  - Fang Lin
Y1  - 2020/09/23
PY  - 2020
N1  - https://doi.org/10.11648/j.sd.20200805.12
DO  - 10.11648/j.sd.20200805.12
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 83
EP  - 89
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20200805.12
AB  - In order to meet the requirements of architectural design form, a high-rise library project appeared many structural seismic designs, such as plane thin waist concave, large area floor missing, tower offset and torsion irregularity. In accordance with the principle of economy, safety and reliability, many calculation measures are adopted in the structural design, such as the comparative analysis of software SATWE and ETABS, the special calculation of floor stress level, the combining floor analysis of missing floors and the strengthening performance analysis under medium and large earthquake. At the same time, according to the structural transfinite items, the structural strengthening measures are taken, such as optimizing the structural layout, reducing the eccentricity, increasing the thickness of the floor at the weak position, and adding diagonal reinforcement in the stress concentration area. Using the above treatment, the structure can meet the fortification target under three levels.
VL  - 8
IS  - 5
ER  -

Copy | Download