Science Discovery

| Peer-Reviewed |

Research on Development of Simulation Interface of Engine Speed Characteristics Based on GT-POWER

Received: 16 September 2018    Accepted:     Published: 18 September 2018
Views:       Downloads:

Share This Article

Abstract

The engine speed characteristic simulation operation interface based on GT-POWER was developed by using VB6.0. VB has the characteristics of simple operation, high efficiency and powerful function. It can realize the background data modification, operation control and calculation result reading and storage of GT-Power model, and draw the engine speed characteristics after finishing the data. curve. Based on ACCESS database, the automatic input and storage of interface input data is realized. The data access, operation control and result reading of GT-POWER model are realized based on VB6.0 programming. The engine is validated by VB6.0 "PictureBox" control. Power, effective torque and effective ratio fuel consumption curve. For the needs of engine speed characteristic simulation, VB6.0 software is used for secondary development of GT-Power, and Chinese operation interface is obtained to simplify the operation process of engine speed characteristic simulation, reduce operation difficulty and improve calculation efficiency, which has certain engineering significance. The simulation method has the advantages of high flexibility, low cost, strong repeatability, and the like, and can obtain parameters that are inconvenient to measure. The results show that the developed engine speed characteristic simulation operation interface can simplify the operation process of engine speed characteristic simulation, reduce the operation difficulty and improve the calculation efficiency.

DOI 10.11648/j.sd.20180605.14
Published in Science Discovery (Volume 6, Issue 5, October 2018)
Page(s) 332-337
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Engine, Speed Characteristics, Simulation

References
[1] 王宪成,张更云,韩树等.车用内燃机学[M].北京:兵器工业出版社,2006:145。
[2] 左承基,欧阳明高,刘铮.柴油机-天然气双燃料发动机工作特性分析[J].石油机械,1999,27(8):16-18。
[3] 于秀敏,唐睿,杨世春,刘乐.汽油机与LPG发动机冷起动特性试验[J].农业机械学报,2007,38(4):4-7。
[4] 梁玲,周经渊.发动机速度特性的数学模型[J].农长沙铁道学院学报,1995,13(3):48-51。
[5] 朱伟伟.发动机特性建模方法的选择[J].现代车用动力,2007(2):27-30。
[6] 赵亚男,赵福堂,刘碧荣.汽车发动机特性仿真研究[J].北京交通大学学报,2008, 32(1):97-100。
[7] 张永栋.基于GT-Power柴油机性能仿真分析[J].机电工程技术,2010, 39(10):38-39,98。
[8] 王娟,李明海.GT-Power在机车柴油机上的仿真应用[J].长沙交通学院学报,2008, 24(3):76-80。
[9] 白杰,杨毅成,王伟.航空发动机防火试验火焰特征数值仿真分析[J].燃气涡轮试验与研究, 2017,30(5):1-7。
[10] 周晓斌.发动机配气机构振动噪声仿真研究[D].重庆大学,2016。
[11] 李素华.变转速条件下汽车发动机故障模式识别仿真[J].计算机仿真,2016,33(11):144-147。
[12] 李鑫,杨赪石,彭博,等.基于联合仿真技术的转缸式斜盘活塞发动机动力学研究[J].船舶工程, 2017(8):35-39。
[13] 纪文晓.缸内直喷CNG发动机稀薄燃烧特性仿真研究[D].重庆交通大学, 2016。
[14] 杜祥哲.微型斯特林发动机的设计与仿真[D].东北林业大学,2016。
[15] 向熔.高压共轨四缸柴油机振动与噪声特性及影响因素研究[D].昆明理工大学, 2016。
[16] 吕赫.废气再循环对氢气汽油双燃料发动机性能影响的仿真研究[D].吉林大学,2017。
[17] 白锦洋,吴学雷,高峰,等.多轴车辆动力传动系统建模与仿真[J].北京航空航天大学学报,2017,43(1):136-143。
[18] 杜子学,沈宏丽,叶双平,等.某型SUV车发动机舱热管理仿真分析及优化[J].小型内燃机与车辆技术,2016,45(2):48-51。
Author Information
  • Department of Vehicle Engineering, Academy of Armored Forces, Beijing, China

  • Department of Vehicle Engineering, Academy of Armored Forces, Beijing, China

  • Department of Vehicle Engineering, Academy of Armored Forces, Beijing, China

  • Department of Vehicle Engineering, Academy of Armored Forces, Beijing, China

  • Department of Vehicle Engineering, Academy of Armored Forces, Beijing, China

Cite This Article
  • APA Style

    Wang Pu-kai, Shi Chao-fan, Kang Qi, Dong Yi, Han Li-jun. (2018). Research on Development of Simulation Interface of Engine Speed Characteristics Based on GT-POWER. Science Discovery, 6(5), 332-337. https://doi.org/10.11648/j.sd.20180605.14

    Copy | Download

    ACS Style

    Wang Pu-kai; Shi Chao-fan; Kang Qi; Dong Yi; Han Li-jun. Research on Development of Simulation Interface of Engine Speed Characteristics Based on GT-POWER. Sci. Discov. 2018, 6(5), 332-337. doi: 10.11648/j.sd.20180605.14

    Copy | Download

    AMA Style

    Wang Pu-kai, Shi Chao-fan, Kang Qi, Dong Yi, Han Li-jun. Research on Development of Simulation Interface of Engine Speed Characteristics Based on GT-POWER. Sci Discov. 2018;6(5):332-337. doi: 10.11648/j.sd.20180605.14

    Copy | Download

  • @article{10.11648/j.sd.20180605.14,
      author = {Wang Pu-kai and Shi Chao-fan and Kang Qi and Dong Yi and Han Li-jun},
      title = {Research on Development of Simulation Interface of Engine Speed Characteristics Based on GT-POWER},
      journal = {Science Discovery},
      volume = {6},
      number = {5},
      pages = {332-337},
      doi = {10.11648/j.sd.20180605.14},
      url = {https://doi.org/10.11648/j.sd.20180605.14},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.sd.20180605.14},
      abstract = {The engine speed characteristic simulation operation interface based on GT-POWER was developed by using VB6.0. VB has the characteristics of simple operation, high efficiency and powerful function. It can realize the background data modification, operation control and calculation result reading and storage of GT-Power model, and draw the engine speed characteristics after finishing the data. curve. Based on ACCESS database, the automatic input and storage of interface input data is realized. The data access, operation control and result reading of GT-POWER model are realized based on VB6.0 programming. The engine is validated by VB6.0 "PictureBox" control. Power, effective torque and effective ratio fuel consumption curve. For the needs of engine speed characteristic simulation, VB6.0 software is used for secondary development of GT-Power, and Chinese operation interface is obtained to simplify the operation process of engine speed characteristic simulation, reduce operation difficulty and improve calculation efficiency, which has certain engineering significance. The simulation method has the advantages of high flexibility, low cost, strong repeatability, and the like, and can obtain parameters that are inconvenient to measure. The results show that the developed engine speed characteristic simulation operation interface can simplify the operation process of engine speed characteristic simulation, reduce the operation difficulty and improve the calculation efficiency.},
     year = {2018}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Research on Development of Simulation Interface of Engine Speed Characteristics Based on GT-POWER
    AU  - Wang Pu-kai
    AU  - Shi Chao-fan
    AU  - Kang Qi
    AU  - Dong Yi
    AU  - Han Li-jun
    Y1  - 2018/09/18
    PY  - 2018
    N1  - https://doi.org/10.11648/j.sd.20180605.14
    DO  - 10.11648/j.sd.20180605.14
    T2  - Science Discovery
    JF  - Science Discovery
    JO  - Science Discovery
    SP  - 332
    EP  - 337
    PB  - Science Publishing Group
    SN  - 2331-0650
    UR  - https://doi.org/10.11648/j.sd.20180605.14
    AB  - The engine speed characteristic simulation operation interface based on GT-POWER was developed by using VB6.0. VB has the characteristics of simple operation, high efficiency and powerful function. It can realize the background data modification, operation control and calculation result reading and storage of GT-Power model, and draw the engine speed characteristics after finishing the data. curve. Based on ACCESS database, the automatic input and storage of interface input data is realized. The data access, operation control and result reading of GT-POWER model are realized based on VB6.0 programming. The engine is validated by VB6.0 "PictureBox" control. Power, effective torque and effective ratio fuel consumption curve. For the needs of engine speed characteristic simulation, VB6.0 software is used for secondary development of GT-Power, and Chinese operation interface is obtained to simplify the operation process of engine speed characteristic simulation, reduce operation difficulty and improve calculation efficiency, which has certain engineering significance. The simulation method has the advantages of high flexibility, low cost, strong repeatability, and the like, and can obtain parameters that are inconvenient to measure. The results show that the developed engine speed characteristic simulation operation interface can simplify the operation process of engine speed characteristic simulation, reduce the operation difficulty and improve the calculation efficiency.
    VL  - 6
    IS  - 5
    ER  - 

    Copy | Download

  • Sections