Science Discovery

| Peer-Reviewed |

Fixed Boundary Vibration Measurement Method for Surface Tension of Membrane Structure

Received: 02 November 2019    Accepted:     Published: 09 December 2019
Views:       Downloads:

Share This Article

Abstract

At present, some methods for measuring the surface tension of membrane structure are applied to engineering practice. But there are some defects happened in the engineering practice. This paper proves the partial boundary of the fixed membrane surface. The natural vibration frequency of the membrane surface is only related to the membrane surface tension. Based on this principle, a magnetic clip-type membrane surface fixed boundary fixture is designed. A method for measuring the tension of the membrane surface tension by measuring the natural vibration frequency of the inner membrane surface of the fixed boundary is proposed. The finite element method was used to analyze the vibration frequency of the fixed boundary membrane under different tensions. The vibration frequency of the fixed boundary membrane under different tensions was measured by experiments. The simulation results were compared with the experimental results, and the accuracy of the method was verified. Through this method, the calibration result of the small sample on the calibration table can be used for the tension measurement of any boundary condition in the actual project and the material film structure, which is in accordance with the requirements of simple operation, wide applicability and high measurement precision in engineering practice.

DOI 10.11648/j.sd.20190706.13
Published in Science Discovery (Volume 7, Issue 6, December 2019)
Page(s) 390-397
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Tensioned Membrane Structures, Tension Measurement, Vibration Method, Numerical Simulation

References
[1] 张其林. 索和膜结构[M]. 上海:同济大学出版社,2002
[2] 张其林.膜结构在我国的应用回顾和未来发展[J].建筑结构,2019,49(19):55-64.
[3] Liu Changjiang, Deng Xiaowei , Liu Jian , Zheng Zhoulian . Impact-induced nonlinear damped vibration of fabric membrane structure: Theory, analysis, experiment and parametric study [J]. 2019. 159: 389-404.
[4] 魏德敏,杨桂通.冲击荷载下弹粘塑性矩形薄板的动力响应[J].工程力学.1986. 3(3).20-32
[5] 邓梁波,叶天麒.圆板在物体撞击下的非线性动力响应[J].力学学报.1990,22(4),420-428
[6] 江松青, 李永池. 横向冲击荷载下加筋板的非线性动力响应[J].中国科学技术大学学报.2000.30(4).406-413
[7] 李阳. 建筑膜材料和膜结构的力学性能研究与应用[D].上海:同济大学,2007.
[8] 孙战金.膜结构预张力测定技术简述[A].天津大学.第四届全国现代结构工程学术研讨会论文集[C].天津大学:全国现代结构工程学术研讨会学术委员会,2004:3:496-498
[9] 孙战金.建筑膜材预张力值测试的理论和实验研究[D].上海:同济大学,2004.
[10] 麻海燕,单建.建筑膜结构荷载的超声快速测定方法[J].工业建筑,2006(09):77-80.
[11] 刘长江.建筑膜结构非线性振动及其预张力测量理论和试验研究[D].重庆:重庆大学,2012.
[12] 余志祥,赵雷.张拉膜结构自振特性研究[J].西南交通大学学报,2004(06):734-739.
[13] 吴福光,蔡承武,徐兆.振动理论[M].北京:高等教育出版社,1987:233-241
[14] 陈才生,李刚,周继东,王文初.数学物理方程[M].北京:科学出版社,2008:233-255
[15] 林文静,陈树辉,李森.圆形薄膜自由振动的理论解[J].振动与冲击,2009,28(05):84-86+206.
[16] 曹志威.基于数字图像相关法的建筑用膜力学性能研究[D].南京理工大学,2018.
Author Information
  • School of Science, Nanjing University of Science and Technology, Nanjing, China

  • Nanjing Institute of Electronic Technology, Nanjing, China

  • School of Science, Nanjing University of Science and Technology, Nanjing, China

  • School of Science, Nanjing University of Science and Technology, Nanjing, China

Cite This Article
  • APA Style

    Shen Hao, Xu Xiaochen, Chen Tao, Xu Zhihong. (2019). Fixed Boundary Vibration Measurement Method for Surface Tension of Membrane Structure. Science Discovery, 7(6), 390-397. https://doi.org/10.11648/j.sd.20190706.13

    Copy | Download

    ACS Style

    Shen Hao; Xu Xiaochen; Chen Tao; Xu Zhihong. Fixed Boundary Vibration Measurement Method for Surface Tension of Membrane Structure. Sci. Discov. 2019, 7(6), 390-397. doi: 10.11648/j.sd.20190706.13

    Copy | Download

    AMA Style

    Shen Hao, Xu Xiaochen, Chen Tao, Xu Zhihong. Fixed Boundary Vibration Measurement Method for Surface Tension of Membrane Structure. Sci Discov. 2019;7(6):390-397. doi: 10.11648/j.sd.20190706.13

    Copy | Download

  • @article{10.11648/j.sd.20190706.13,
      author = {Shen Hao and Xu Xiaochen and Chen Tao and Xu Zhihong},
      title = {Fixed Boundary Vibration Measurement Method for Surface Tension of Membrane Structure},
      journal = {Science Discovery},
      volume = {7},
      number = {6},
      pages = {390-397},
      doi = {10.11648/j.sd.20190706.13},
      url = {https://doi.org/10.11648/j.sd.20190706.13},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.sd.20190706.13},
      abstract = {At present, some methods for measuring the surface tension of membrane structure are applied to engineering practice. But there are some defects happened in the engineering practice. This paper proves the partial boundary of the fixed membrane surface. The natural vibration frequency of the membrane surface is only related to the membrane surface tension. Based on this principle, a magnetic clip-type membrane surface fixed boundary fixture is designed. A method for measuring the tension of the membrane surface tension by measuring the natural vibration frequency of the inner membrane surface of the fixed boundary is proposed. The finite element method was used to analyze the vibration frequency of the fixed boundary membrane under different tensions. The vibration frequency of the fixed boundary membrane under different tensions was measured by experiments. The simulation results were compared with the experimental results, and the accuracy of the method was verified. Through this method, the calibration result of the small sample on the calibration table can be used for the tension measurement of any boundary condition in the actual project and the material film structure, which is in accordance with the requirements of simple operation, wide applicability and high measurement precision in engineering practice.},
     year = {2019}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Fixed Boundary Vibration Measurement Method for Surface Tension of Membrane Structure
    AU  - Shen Hao
    AU  - Xu Xiaochen
    AU  - Chen Tao
    AU  - Xu Zhihong
    Y1  - 2019/12/09
    PY  - 2019
    N1  - https://doi.org/10.11648/j.sd.20190706.13
    DO  - 10.11648/j.sd.20190706.13
    T2  - Science Discovery
    JF  - Science Discovery
    JO  - Science Discovery
    SP  - 390
    EP  - 397
    PB  - Science Publishing Group
    SN  - 2331-0650
    UR  - https://doi.org/10.11648/j.sd.20190706.13
    AB  - At present, some methods for measuring the surface tension of membrane structure are applied to engineering practice. But there are some defects happened in the engineering practice. This paper proves the partial boundary of the fixed membrane surface. The natural vibration frequency of the membrane surface is only related to the membrane surface tension. Based on this principle, a magnetic clip-type membrane surface fixed boundary fixture is designed. A method for measuring the tension of the membrane surface tension by measuring the natural vibration frequency of the inner membrane surface of the fixed boundary is proposed. The finite element method was used to analyze the vibration frequency of the fixed boundary membrane under different tensions. The vibration frequency of the fixed boundary membrane under different tensions was measured by experiments. The simulation results were compared with the experimental results, and the accuracy of the method was verified. Through this method, the calibration result of the small sample on the calibration table can be used for the tension measurement of any boundary condition in the actual project and the material film structure, which is in accordance with the requirements of simple operation, wide applicability and high measurement precision in engineering practice.
    VL  - 7
    IS  - 6
    ER  - 

    Copy | Download

  • Sections