Real Time System Based Monitoring of Turbine Parameters and Protection System in Thermal Power Plant
International Journal of Science, Technology and Society
Volume 3, Issue 3, May 2015, Pages: 69-75
Received: Mar. 5, 2015; Accepted: Mar. 19, 2015; Published: Apr. 7, 2015
Views 5147      Downloads 140
Authors
M. Surekha, Student, Embedded System Technologies, Knowledge Institute of Technology, Salem, India
N. Suthanthira Vanitha, Head of the Department, Department of Electrical & Electronics Engineering, Knowledge Institute of Technology, Salem, India
K. Yadhari, Assistant Professor, Department of Electrical & Electronics Engineering, Knowledge Institute of Technology, Salem, India
Article Tools
Follow on us
Abstract
Currently in thermal power plant the turbine system parameters like temperature, speed, lubrication oil level and vibrations can be monitored by using the MATLAB. If any problem occurs in the turbine parameters, that can be controlled manually and the protection system is based on the relay mechanism which causes failure in the action of switch. In the proposed system, the drawbacks are eliminated with the support of high speed embedded processor. Real Time processor can be easily altered according to the ports and number of devices can also be connected. The parameters in the turbine system can be measured, monitored and controlled automatically. The parameters variations can be graphically represented by using the LabVIEW.
Keywords
ARM8Processor, MATLAB, LabVIEW, Automation System and Sensors
To cite this article
M. Surekha, N. Suthanthira Vanitha, K. Yadhari, Real Time System Based Monitoring of Turbine Parameters and Protection System in Thermal Power Plant, International Journal of Science, Technology and Society. Vol. 3, No. 3, 2015, pp. 69-75. doi: 10.11648/j.ijsts.20150303.11
References
[1]
Mohamed Zahran and Ali Yousef et al published a paper on “monitoring of photovoltaic wind turbine battery hybrid system”, (WSEAS-2014).
[2]
ShiyamSundar published a paper on “simulation of generator unit in thermal power plant using LabVIEW”, (IOSR-2013).
[3]
PengGuo and David Infield published a paper on “wind turbine generator condition monitoring using temperature trend analysis”, (IEEE-2012).
[4]
Krishna Prasad Dasari and Dr.A.M.Prasad et al published a paper on “water temperature and flow control measurement for thermal discharge model using PID controller, (IJERA-2012).
[5]
Alberto Borghetti and Mauro Bosetti et al published a paper on “parameters identification of a power plant model for the simulation of islanding transients”, (U.P.B.SCI.BULL-2010).
[6]
Jaishree.S and Dr.K.Sathiyasekar et al published a paper on “wireless fault detection and preventive system for small wind turbine”, (IJAREEIE-2014).
[7]
L.SenthilMurugan and K.S.Aswath Rangaraj et al published a paper on “design of monitoring system and fault diagnosis in wind turbine based on can bus using arm”, (IJIRSET-2014).
[8]
Anish Mathew k et al published a paper on “internal model control of pressure process using arm microcontroller”, (ICCEET-2012).
[9]
Nie Chun-yan and Xu shan-shan et al published a paper on “data acquisition and realization of communication transmission based on LabVIEW”, (IEEE-2012).
[10]
V.Rukkumani and D.AngelineVijula et al published a paper on “Multiple parameter Monitor and Control in Wind Mills”, (IJCAT-2012).
[11]
John Sander et al published a paper on “steam turbine oil challenges”, (LELUBRICANTS-2012).
[12]
Masaki Kato and Seiichi Asano et al published a paper on “recent technology for reusing aged thermal power generating units”, (FUJIELECTRIC-2010).
ADDRESS
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
U.S.A.
Tel: (001)347-983-5186