Real Time System Based Monitoring of Turbine Parameters and Protection System in Thermal Power Plant

M. Surekha; N. Suthanthira Vanitha; K. Yadhari

doi:doi:10.11648/j.ijsts.20150303.11

| Peer-Reviewed

Real Time System Based Monitoring of Turbine Parameters and Protection System in Thermal Power Plant

M. Surekha, N. Suthanthira Vanitha, K. Yadhari

Published in International Journal of Science, Technology and Society (Volume 3, Issue 3)

Received: 5 March 2015 Accepted: 19 March 2015 Published: 7 April 2015

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Currently in thermal power plant the turbine system parameters like temperature, speed, lubrication oil level and vibrations can be monitored by using the MATLAB. If any problem occurs in the turbine parameters, that can be controlled manually and the protection system is based on the relay mechanism which causes failure in the action of switch. In the proposed system, the drawbacks are eliminated with the support of high speed embedded processor. Real Time processor can be easily altered according to the ports and number of devices can also be connected. The parameters in the turbine system can be measured, monitored and controlled automatically. The parameters variations can be graphically represented by using the LabVIEW.

Published in	International Journal of Science, Technology and Society (Volume 3, Issue 3)
DOI	10.11648/j.ijsts.20150303.11
Page(s)	69-75
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

ARM8Processor, MATLAB, LabVIEW, Automation System and Sensors

References

[1]	Mohamed Zahran and Ali Yousef et al published a paper on “monitoring of photovoltaic wind turbine battery hybrid system”, (WSEAS-2014).
[2]	ShiyamSundar published a paper on “simulation of generator unit in thermal power plant using LabVIEW”, (IOSR-2013).
[3]	PengGuo and David Infield published a paper on “wind turbine generator condition monitoring using temperature trend analysis”, (IEEE-2012).
[4]	Krishna Prasad Dasari and Dr.A.M.Prasad et al published a paper on “water temperature and flow control measurement for thermal discharge model using PID controller, (IJERA-2012).
[5]	Alberto Borghetti and Mauro Bosetti et al published a paper on “parameters identification of a power plant model for the simulation of islanding transients”, (U.P.B.SCI.BULL-2010).
[6]	Jaishree.S and Dr.K.Sathiyasekar et al published a paper on “wireless fault detection and preventive system for small wind turbine”, (IJAREEIE-2014).
[7]	L.SenthilMurugan and K.S.Aswath Rangaraj et al published a paper on “design of monitoring system and fault diagnosis in wind turbine based on can bus using arm”, (IJIRSET-2014).
[8]	Anish Mathew k et al published a paper on “internal model control of pressure process using arm microcontroller”, (ICCEET-2012).
[9]	Nie Chun-yan and Xu shan-shan et al published a paper on “data acquisition and realization of communication transmission based on LabVIEW”, (IEEE-2012).
[10]	V.Rukkumani and D.AngelineVijula et al published a paper on “Multiple parameter Monitor and Control in Wind Mills”, (IJCAT-2012).
[11]	John Sander et al published a paper on “steam turbine oil challenges”, (LELUBRICANTS-2012).
[12]	Masaki Kato and Seiichi Asano et al published a paper on “recent technology for reusing aged thermal power generating units”, (FUJIELECTRIC-2010).

Cite This Article

Plain Text BibTeX RIS

APA Style

M. Surekha, N. Suthanthira Vanitha, K. Yadhari. (2015). Real Time System Based Monitoring of Turbine Parameters and Protection System in Thermal Power Plant. International Journal of Science, Technology and Society, 3(3), 69-75. https://doi.org/10.11648/j.ijsts.20150303.11

Copy | Download

ACS Style

M. Surekha; N. Suthanthira Vanitha; K. Yadhari. Real Time System Based Monitoring of Turbine Parameters and Protection System in Thermal Power Plant. Int. J. Sci. Technol. Soc. 2015, 3(3), 69-75. doi: 10.11648/j.ijsts.20150303.11

Copy | Download

AMA Style

M. Surekha, N. Suthanthira Vanitha, K. Yadhari. Real Time System Based Monitoring of Turbine Parameters and Protection System in Thermal Power Plant. Int J Sci Technol Soc. 2015;3(3):69-75. doi: 10.11648/j.ijsts.20150303.11

Copy | Download

@article{10.11648/j.ijsts.20150303.11,
  author = {M. Surekha and N. Suthanthira Vanitha and K. Yadhari},
  title = {Real Time System Based Monitoring of Turbine Parameters and Protection System in Thermal Power Plant},
  journal = {International Journal of Science, Technology and Society},
  volume = {3},
  number = {3},
  pages = {69-75},
  doi = {10.11648/j.ijsts.20150303.11},
  url = {https://doi.org/10.11648/j.ijsts.20150303.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijsts.20150303.11},
  abstract = {Currently in thermal power plant the turbine system parameters like temperature, speed, lubrication oil level and vibrations can be monitored by using the MATLAB. If any problem occurs in the turbine parameters, that can be controlled manually and the protection system is based on the relay mechanism which causes failure in the action of switch. In the proposed system, the drawbacks are eliminated with the support of high speed embedded processor. Real Time processor can be easily altered according to the ports and number of devices can also be connected. The parameters in the turbine system can be measured, monitored and controlled automatically. The parameters variations can be graphically represented by using the LabVIEW.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Real Time System Based Monitoring of Turbine Parameters and Protection System in Thermal Power Plant
AU  - M. Surekha
AU  - N. Suthanthira Vanitha
AU  - K. Yadhari
Y1  - 2015/04/07
PY  - 2015
N1  - https://doi.org/10.11648/j.ijsts.20150303.11
DO  - 10.11648/j.ijsts.20150303.11
T2  - International Journal of Science, Technology and Society
JF  - International Journal of Science, Technology and Society
JO  - International Journal of Science, Technology and Society
SP  - 69
EP  - 75
PB  - Science Publishing Group
SN  - 2330-7420
UR  - https://doi.org/10.11648/j.ijsts.20150303.11
AB  - Currently in thermal power plant the turbine system parameters like temperature, speed, lubrication oil level and vibrations can be monitored by using the MATLAB. If any problem occurs in the turbine parameters, that can be controlled manually and the protection system is based on the relay mechanism which causes failure in the action of switch. In the proposed system, the drawbacks are eliminated with the support of high speed embedded processor. Real Time processor can be easily altered according to the ports and number of devices can also be connected. The parameters in the turbine system can be measured, monitored and controlled automatically. The parameters variations can be graphically represented by using the LabVIEW.
VL  - 3
IS  - 3
ER  -

Copy | Download

Author Information

M. Surekha

Student, Embedded System Technologies, Knowledge Institute of Technology, Salem, India
N. Suthanthira Vanitha

Head of the Department, Department of Electrical & Electronics Engineering, Knowledge Institute of Technology, Salem, India
K. Yadhari

Assistant Professor, Department of Electrical & Electronics Engineering, Knowledge Institute of Technology, Salem, India

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

M. Surekha, N. Suthanthira Vanitha, K. Yadhari. (2015). Real Time System Based Monitoring of Turbine Parameters and Protection System in Thermal Power Plant. International Journal of Science, Technology and Society, 3(3), 69-75. https://doi.org/10.11648/j.ijsts.20150303.11

Copy | Download

ACS Style

M. Surekha; N. Suthanthira Vanitha; K. Yadhari. Real Time System Based Monitoring of Turbine Parameters and Protection System in Thermal Power Plant. Int. J. Sci. Technol. Soc. 2015, 3(3), 69-75. doi: 10.11648/j.ijsts.20150303.11

Copy | Download

AMA Style

M. Surekha, N. Suthanthira Vanitha, K. Yadhari. Real Time System Based Monitoring of Turbine Parameters and Protection System in Thermal Power Plant. Int J Sci Technol Soc. 2015;3(3):69-75. doi: 10.11648/j.ijsts.20150303.11

Copy | Download

@article{10.11648/j.ijsts.20150303.11,
  author = {M. Surekha and N. Suthanthira Vanitha and K. Yadhari},
  title = {Real Time System Based Monitoring of Turbine Parameters and Protection System in Thermal Power Plant},
  journal = {International Journal of Science, Technology and Society},
  volume = {3},
  number = {3},
  pages = {69-75},
  doi = {10.11648/j.ijsts.20150303.11},
  url = {https://doi.org/10.11648/j.ijsts.20150303.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijsts.20150303.11},
  abstract = {Currently in thermal power plant the turbine system parameters like temperature, speed, lubrication oil level and vibrations can be monitored by using the MATLAB. If any problem occurs in the turbine parameters, that can be controlled manually and the protection system is based on the relay mechanism which causes failure in the action of switch. In the proposed system, the drawbacks are eliminated with the support of high speed embedded processor. Real Time processor can be easily altered according to the ports and number of devices can also be connected. The parameters in the turbine system can be measured, monitored and controlled automatically. The parameters variations can be graphically represented by using the LabVIEW.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Real Time System Based Monitoring of Turbine Parameters and Protection System in Thermal Power Plant
AU  - M. Surekha
AU  - N. Suthanthira Vanitha
AU  - K. Yadhari
Y1  - 2015/04/07
PY  - 2015
N1  - https://doi.org/10.11648/j.ijsts.20150303.11
DO  - 10.11648/j.ijsts.20150303.11
T2  - International Journal of Science, Technology and Society
JF  - International Journal of Science, Technology and Society
JO  - International Journal of Science, Technology and Society
SP  - 69
EP  - 75
PB  - Science Publishing Group
SN  - 2330-7420
UR  - https://doi.org/10.11648/j.ijsts.20150303.11
AB  - Currently in thermal power plant the turbine system parameters like temperature, speed, lubrication oil level and vibrations can be monitored by using the MATLAB. If any problem occurs in the turbine parameters, that can be controlled manually and the protection system is based on the relay mechanism which causes failure in the action of switch. In the proposed system, the drawbacks are eliminated with the support of high speed embedded processor. Real Time processor can be easily altered according to the ports and number of devices can also be connected. The parameters in the turbine system can be measured, monitored and controlled automatically. The parameters variations can be graphically represented by using the LabVIEW.
VL  - 3
IS  - 3
ER  -

Copy | Download