A Study on Minimization of Injury and Accidental Causes in Different Operational Sections of RMG Industries in Bangladesh
International Journal of Industrial and Manufacturing Systems Engineering
Volume 4, Issue 1, January 2019, Pages: 10-18
Received: Mar. 4, 2019;
Accepted: Apr. 9, 2019;
Published: Apr. 29, 2019
Views 655 Downloads 130
Israt Parveen, Department of Textile Engineering, Mawlana Bhashani Science and Technology University, Santosh, Tangail, Bangladesh
Md. Iqbal Mahmud, Department of Textile Engineering, Mawlana Bhashani Science and Technology University, Santosh, Tangail, Bangladesh
Anik Kumar Mondol, Department of Textile Engineering, Mawlana Bhashani Science and Technology University, Santosh, Tangail, Bangladesh
Mosammot Nelufa Akter, Department of Textile Engineering, Mawlana Bhashani Science and Technology University, Santosh, Tangail, Bangladesh
Shima Shil, Department of Textile Engineering, Mawlana Bhashani Science and Technology University, Santosh, Tangail, Bangladesh
The primary objective of this study is to investigate the industrial accident in readymade garments (RMG) industries and find out the ways how this risk of injuries and accidents can be mitigating by implementing safety rules and suggestions. The paper discusses in brief the risk of injury and accidental causes of workers in various sections like dyeing, cutting, sewing, printing and finishing of RMG industries based upon the industrial environment and working conditions. The sample respondents are selected from the different industries in Tangail district. Purposive sampling technique is followed for data collection, where different level of respondents is interviewed for collecting information from selective garments industry. After analyzing the collected data, the major accidental causes and injuries faced by the workers in those selective units are indicated for which there have been noticed a massive fall down of workers’ efficiency. Indicating those problems, improvement proposals are given to those industries and implemented over a course of month. From the proposed improvement proposal, it is found that, the rate of injury and accidental risks have been decreased far better than before and almost all risks can be properly controlled if the managing as well as responsible parties try to follow the risk controlling technique properly.
Md. Iqbal Mahmud,
Anik Kumar Mondol,
Mosammot Nelufa Akter,
A Study on Minimization of Injury and Accidental Causes in Different Operational Sections of RMG Industries in Bangladesh, International Journal of Industrial and Manufacturing Systems Engineering.
Vol. 4, No. 1,
2019, pp. 10-18.
Beriha, Shankar, Gouri, “Occupational Health and Safety (OHS) Issues in Social Marketing” National Institute of Technology Rourekia - 769008, INDIA; March 2012.
Mehedi Ahmed Ansary, Uttama Barua, Workplace Safety Compliance of RMG Industry in Bangladesh: Structural Assessment of RMG Factory Buildings, International Journal of Disaster Risk Reduction, 14, 424-437, 2015.
Md. Morshedul Hasan, Appel Mahmud, Md. Samiul Islam, Deadly Accidents in Bangladeshi Apparel Industry and Illustrating the Causes and Effects of These Incidents, Journal of Finance and Accounting, 5(5): 193-199, 2017.
Uddin, M., Adnan, A., Sultana, N., Muktadir, M., Fire Safety and Security System in High-rise Buildings in Tangail Pourashava, Journal of Environmental Science and Natural Resources, 10 (1), 33-40, 2017.
Kallol Kumar Samaddar, Occupational Health and Safety Management In RMG Sector of Bangladesh, International Journal of Scientific & Technology Research, Volume 5, Issue 12, December 2016.
Claude J. Romer, The Importance of Accident and Injury Prevention, ERGONOMICS, Vol. 30, p. 173-179, 1987.
C. D. Kane, “Environmental and Health Hazard in Spinning Industries and their Control”, Indian Journal of Fiber and Textile Research, Vol. 26, p. 39-43, 2001.
Z. Amin, R. Mohammad, S. Abdul Aziz and N. Othman, “Workers’ Safety Awareness Level on Hand Related Injury and Accident in Metal Fabrication Industry”, Journal of Advanced Research in Applied Sciences and Engineering Technology, Vol. 1, No. 1, 2015, p. 1-12, 2015.
Afamdi O. Ezenwa, “A study of fatal injuries in Nigerian factories”, Occupational Medicine, Vol. 51, Issue 8, p. 485-489, 2001.
S. Calvin and Bobby Joseph, “Occupation Related Accidents in Selected Garment Industries in Bangalore City”, Indian Journal of Community Medicine, Vol. 31, No. 3, July-September, 2006.
Waqas Ahmed Khan, Talha Mustaq and Anmol Tabassum, “Occupational Health and Safety and Risk Analysis”, International Journal of Science, Environment and Technology, Vol. 3, No. 4, p. 1336-1346, 2014.
Kirsten Jorgensen, “Concepts of Accident Analysis”, Encyclopedia of Occupational Health and Safety (Part VIII: Accident and Safety Management), March 30, 2011.
K. Raman, “Industrial eye accident prevention in textile mills”, Indian Journal of Ophthalmology, Vol. 16, Issue 4, p. 196-197, 1968.
Praveen Kumar M, Mugundhan K and Visagavel K “Occupational Health and Safety in Textile Industry” International Journal of Research in Engineering and Technology, Vol. 3, Issue 11, p. 168-172, 2014.
Mustafa SERİNKEN, Ibrahim TÜRKÇÜER, Bekir DAĞLI, Özgür KARCIOĞLU, Mehmet ZENCİR and Emrah UYANIK, “Work-related injuries in textile industry workers in Turkey”, Turkish Journal of Trauma & Emergency Surgery, Vol. 18 (1), p. 31-36, 2012.
Muhammad Faisol Chowdhury and Tasnim Rezoana Tanim, “Industrial Accidents in Bangladesh Apparel Manufacturing Sector: An Analysis of the Two Deadliest Accidents in History”, Asian Journal of Social Sciences and Management Studies, Vol. 3 (2), p. 115-126, 2016.
Ma, yun, Jian, “Analysis on the Fire Risk Existing in the Storage of Textile Materials and Textile Goods” Procedia Engineering, p. 271-275, 2014.
Safety Data Sheets for Hazardous Chemicals Information Sheet, HEALTH AND SAFETY AUTHORITY, Updated Sept 2018.
Abir, Mahmud, Tareq, “Haphazard Industrialization and The Risk of Fire In Dhaka” International J0urnal of Research in Applied Science; ISSN (E): 2321-8851; ISSN (P): 2347-4580; Volume-2, November 2014.
Tareq Mahmud Abir, “Applied Haphazard Industrialization And The Risk Of Fire A Study On Garments Industries In Dhaka" International Journal of Research in Applied, Natural and Social Sciences, Vol. 2, Issue 11, p. 25-34, 2014.