| Peer-Reviewed

Influence of a New Energy-Saving Drying Method on the Quality of Corn Seeds

Received: 16 December 2020    Accepted: 23 December 2020    Published: 12 January 2021
Views:       Downloads:
Abstract

Drying corn, especially seeds in cobs, requires much higher energy consumption compared to other cereals. Therefore, there is a need to find and study new methods of energy saving. Our work’s objective was: to analyze energy-saving methods of drying corn seeds in chamber corn dryers; to investigate the effect of a new corn cobs drying method on the sowing and yield properties of seeds. The new method is energy-saving and based on the use of a SKP chamber corn dryer in combination with a heat generator for biomass burning. We researched and characterized the known energy saving methods in the process of drying in SKP type chamber corn dryers, such as: two-stage drying of cobs with additional drying in grain; return of spent coolant to the drying zone (recirculation); application of maximum allowable heating temperatures (intensive drying). We established the influence of energy-saving drying methods on the quality of corn seeds. To study the effect of the new drying method on the technological, sowing and yield properties of corn seeds, we used a typical chamber dryer for corn SKP-10 in combination with a heat generator TPG-1/25 for biomass combustion. During the drying process on the energy-saving complex, cob samples were taken to determine the quality of seeds. The control level was seeds dried in a laboratory dryer at a temperature of 39°C with forced air circulation and indoors at a temperature of 20-25°C. Moderate drying temperature, what provide a new energy-saving complex, reduces seed injury by thermal cracking, which is from 2 to 5%. Sowing qualities and yield properties of corn seeds dried in the new complex were at the control level, and in some cases exceeded it. Thanks to the use of a new method of drying, you can completely abandon the expensive traditional fuel, while offering high technological properties and seed quality.

Published in American Journal of Agriculture and Forestry (Volume 9, Issue 1)
DOI 10.11648/j.ajaf.20210901.11
Page(s) 1-6
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Heat Generator, Chamber Corn Dryer, Cobs Drying, Seed Quality, Energy Saving Complex, Seed Germination

References
[1] Xu J., Chen W., Qingyue B., Zhongyan L., Zhentao Z. (2020) Study on drying characteristics of corn based on 3D model. International Journal of Food Engineering, 16 (8).
[2] Alejnikov, V. I. (2002). Comprehensive improvement of the drying process in the mine and chamber grain dryers. Scientific works ONAFT, 24, 28–31.
[3] Claumann. C. A., Cancelier. A., Silva, A., Zibetti, A. W., Lopes, T. J., Machado, R. A. (2017). Fitting semi‐empirical drying models using a tool based on wavelet neural networks: Modeling a maize drying process. Journal of Food Process Engineering, 41 (1), 1–12.
[4] Suleiman, R., Bern, C. J., Brumm, T. J., Rosentrater, K. A. (2018). Impact of moisture content and maize weevils on maize quality during hermetic and non-hermetic storage. Journal of Stored Products Research, 78, 1–10.
[5] Stankevich G. M., Ovsjannikova L. K. Development of energy-saving technology for drying grain in grain dryers of low productivity. Scientific works ONAFT, 21, 24–26.
[6] Bin L., Chengjie L., Junying H., Changyou L. (2020) Exergoeconomic Analysis of Corn Drying in a Novel Industrial Drying System. Entropy, 22 (6), 689.
[7] Abasi, S., Minael, S. (2014). Effect of Drying Temperature on Mechanical Properties of Dried Corn. Drying Technology An International Journal, 32 (7), 774–780.
[8] Coradi, P. C., Fernandes, C. P., Helmich J. C., Goneli, A. D. (2016). Effects of drying air temperature and grain initial moisture content on soybean quality (Glycine Max (L.) Merrill). Engenharia Agrícola, 36 (5).
[9] Coradi, P. C., Fernandes, C. P., Peralta, C. C., Pereira, T. L. (2015). Effects of drying and storage conditions in the quality of sunflower seeds. Pap Pesquisa Agropecuaria Pernambucana, 20 (1).
[10] Instruction on the processing of hybrid and varietal corn seeds in factories. (1971). Moskva. 1971. 83.
[11] Stankevych, G. M., Strahova, T. V., Atanazevych, V. I. (1997). Grain drying. Lybid', Kiev, 352.
[12] Kyrpa, M. Ja., Kulyk, V. O. (2016). Energy-saving techniques in corn seed drying technology. Bulletin of the Institute of Agriculture of the steppe zone of the NAAS of Ukraine, 11, 82–87.
[13] Kyrpa, N. Ja. (1986). Two-stage drying of corn seeds. Corn breeding and seed production, 174–181.
[14] Fushimi, C., Fukui, K. (2014). Simplification and Energy Saving of Drying Process Based on Self-Heat Recuperation Technology. Drying Technology An International Journal, 32 (6), 667–678.
[15] Zhidko, V. I., Rezchikov, V. A., Ukolov, V. S. (1982). Grain drying and grain dryers. Kolos, Moscow 239.
[16] Snjezhkin, Ju., Pazjuk, V., Petrova, Zh., Vyshnjevs'kyj, V. (2019). Development of energy efficient modes of drying of seeds of grain crops. Scientific Works, 83 (2), 121-127.
[17] Del Campo, B. G., Brumm, T. J., Bern, C. J., Nyendu G. C. (2014). Corn cob dry matter loss in storage as affected by temperature and moisture content. American Society of Agricultural and Biological Engineers, 57 (2), 573–578.
[18] SSTU 4138-2002. 2003. Seeds of agricultural crops. Methods of definition their quality. [Effective since 2004 – 01 – 01]. Publish. official. Kyiv: Holding the standard override of Ukraine, 173 p. https://www.twirpx.com/file/2576304/.
[19] Kyrpa, N. Ja. (2004). Methods for assessing the quality and seeding suitability of seeds. Grain storage and processing, 2, 21–22.
[20] Lebid', Je. M., Cykov, V. S., Pashhenko, Ju. M. (2008). Methods of conducting experiments with corn: methodical recommendations. DU IZK NAANU, 27.
[21] Dospehov B. A. (1985). Methods of field experience (with the basics of statistical processing of research results). Agropromizdat, 351.
[22] Shuo W., Bo X., Weijun X., Fenghe W., Pengxiao C., Deyong Y. (2020) Stress simulation and cracking prediction of corn kernels during hot-air drying. Food and Bioproducts Processing. Vol 121, 202-212.
[23] M. Kyrpa, V. Kulyk (2019) New power-saving complex for drying seeds of corn, Visnyk agrarnoi nauky. (97) 4, 60-66.
[24] Peter B., Miroslav M., Ivan R., Pavol F., Adam F., Pawel K., Urszula M.. (2019). The influence of drying temperature and moisture of corn seeds planted on their damage. Agricultural Engineerin, 23 (1), 5-11.
[25] Everson Reis Carvalho, Victor Moss Francischini, Suemar Alexandre Gonçalves Avelar, Júlia Camargos da Costa. (2019). Temperatures and periods of drying delay and quality of corn seeds harvested on the ears. Journal of Seed Science. 41 (3), 336-343.
Cite This Article
  • APA Style

    Kyrpa Mykola, Kulyk Vіctor, Kupar Julia, Stasiv Oleg. (2021). Influence of a New Energy-Saving Drying Method on the Quality of Corn Seeds. American Journal of Agriculture and Forestry, 9(1), 1-6. https://doi.org/10.11648/j.ajaf.20210901.11

    Copy | Download

    ACS Style

    Kyrpa Mykola; Kulyk Vіctor; Kupar Julia; Stasiv Oleg. Influence of a New Energy-Saving Drying Method on the Quality of Corn Seeds. Am. J. Agric. For. 2021, 9(1), 1-6. doi: 10.11648/j.ajaf.20210901.11

    Copy | Download

    AMA Style

    Kyrpa Mykola, Kulyk Vіctor, Kupar Julia, Stasiv Oleg. Influence of a New Energy-Saving Drying Method on the Quality of Corn Seeds. Am J Agric For. 2021;9(1):1-6. doi: 10.11648/j.ajaf.20210901.11

    Copy | Download

  • @article{10.11648/j.ajaf.20210901.11,
      author = {Kyrpa Mykola and Kulyk Vіctor and Kupar Julia and Stasiv Oleg},
      title = {Influence of a New Energy-Saving Drying Method on the Quality of Corn Seeds},
      journal = {American Journal of Agriculture and Forestry},
      volume = {9},
      number = {1},
      pages = {1-6},
      doi = {10.11648/j.ajaf.20210901.11},
      url = {https://doi.org/10.11648/j.ajaf.20210901.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajaf.20210901.11},
      abstract = {Drying corn, especially seeds in cobs, requires much higher energy consumption compared to other cereals. Therefore, there is a need to find and study new methods of energy saving. Our work’s objective was: to analyze energy-saving methods of drying corn seeds in chamber corn dryers; to investigate the effect of a new corn cobs drying method on the sowing and yield properties of seeds. The new method is energy-saving and based on the use of a SKP chamber corn dryer in combination with a heat generator for biomass burning. We researched and characterized the known energy saving methods in the process of drying in SKP type chamber corn dryers, such as: two-stage drying of cobs with additional drying in grain; return of spent coolant to the drying zone (recirculation); application of maximum allowable heating temperatures (intensive drying). We established the influence of energy-saving drying methods on the quality of corn seeds. To study the effect of the new drying method on the technological, sowing and yield properties of corn seeds, we used a typical chamber dryer for corn SKP-10 in combination with a heat generator TPG-1/25 for biomass combustion. During the drying process on the energy-saving complex, cob samples were taken to determine the quality of seeds. The control level was seeds dried in a laboratory dryer at a temperature of 39°C with forced air circulation and indoors at a temperature of 20-25°C. Moderate drying temperature, what provide a new energy-saving complex, reduces seed injury by thermal cracking, which is from 2 to 5%. Sowing qualities and yield properties of corn seeds dried in the new complex were at the control level, and in some cases exceeded it. Thanks to the use of a new method of drying, you can completely abandon the expensive traditional fuel, while offering high technological properties and seed quality.},
     year = {2021}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Influence of a New Energy-Saving Drying Method on the Quality of Corn Seeds
    AU  - Kyrpa Mykola
    AU  - Kulyk Vіctor
    AU  - Kupar Julia
    AU  - Stasiv Oleg
    Y1  - 2021/01/12
    PY  - 2021
    N1  - https://doi.org/10.11648/j.ajaf.20210901.11
    DO  - 10.11648/j.ajaf.20210901.11
    T2  - American Journal of Agriculture and Forestry
    JF  - American Journal of Agriculture and Forestry
    JO  - American Journal of Agriculture and Forestry
    SP  - 1
    EP  - 6
    PB  - Science Publishing Group
    SN  - 2330-8591
    UR  - https://doi.org/10.11648/j.ajaf.20210901.11
    AB  - Drying corn, especially seeds in cobs, requires much higher energy consumption compared to other cereals. Therefore, there is a need to find and study new methods of energy saving. Our work’s objective was: to analyze energy-saving methods of drying corn seeds in chamber corn dryers; to investigate the effect of a new corn cobs drying method on the sowing and yield properties of seeds. The new method is energy-saving and based on the use of a SKP chamber corn dryer in combination with a heat generator for biomass burning. We researched and characterized the known energy saving methods in the process of drying in SKP type chamber corn dryers, such as: two-stage drying of cobs with additional drying in grain; return of spent coolant to the drying zone (recirculation); application of maximum allowable heating temperatures (intensive drying). We established the influence of energy-saving drying methods on the quality of corn seeds. To study the effect of the new drying method on the technological, sowing and yield properties of corn seeds, we used a typical chamber dryer for corn SKP-10 in combination with a heat generator TPG-1/25 for biomass combustion. During the drying process on the energy-saving complex, cob samples were taken to determine the quality of seeds. The control level was seeds dried in a laboratory dryer at a temperature of 39°C with forced air circulation and indoors at a temperature of 20-25°C. Moderate drying temperature, what provide a new energy-saving complex, reduces seed injury by thermal cracking, which is from 2 to 5%. Sowing qualities and yield properties of corn seeds dried in the new complex were at the control level, and in some cases exceeded it. Thanks to the use of a new method of drying, you can completely abandon the expensive traditional fuel, while offering high technological properties and seed quality.
    VL  - 9
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • State Establishment Institute of Grain Crops of National Academy Agrarian Sciences of Ukraine, Dnipro, Ukraine

  • State Establishment Institute of Grain Crops of National Academy Agrarian Sciences of Ukraine, Dnipro, Ukraine

  • Institute of Agriculture of the Carpathian Region of NAAS, Obroshino, Ukraine

  • Sections