International Journal of Mechanical Engineering and Applications
Volume 3, Issue 4, August 2015, Pages: 71-80
Received: May 5, 2015;
Accepted: Jul. 2, 2015;
Published: Aug. 1, 2015
Views 8752 Downloads 397
H. Babaei, Department of Mechanical Engineering, Engineering Faculty, University of Guilan, Rasht, Iran
M. Malakzadeh, Department of Mechanical Engineering, Engineering Faculty, University of Guilan, Rasht, Iran
H. Asgari, Department of Mechanical Engineering, Engineering Faculty, University of Guilan, Rasht, Iran
In the optimal design of a modern gun barrel, there are some aspects to be considered. One of the main factor is internal ballistic which consist of pressure-time, pressure-distance, velocity-time and distance-time curves. In this paper, a simple analytical solution for the plastic stress of an internally pressurized open-ended thick-walled cylinder made of hardening steel which is the closest model to gun barrel is obtained in perfectly plastic and plane stress condition by using energy method and the yield criterion of Von Mises and adding rifle grooves and choosing stress components as basic unknowns and ballistic pressure equation as known. Then results of analytical solution are compared to a numerical model and verified a very well and reliable accuracy. So the resultant can be used easily in calculation of radial expansion velocity and compressive pressure.
Stress Analysis of Gun Barrel Subjected to Dynamic Pressure, International Journal of Mechanical Engineering and Applications.
Vol. 3, No. 4,
2015, pp. 71-80.
Nadai, A., Theory of Flow and Fracture of Solid, Vol. 1, McGraw-Hill, New York, 1950, pp. 472-81.
Davidson, T. E., et al., Overstrain of high-strength open-ended cylinders of intermediate diameter ratio, In Proceedings of the 1st International Congress on Experimental Mechanics, Pergamon Press, New York, 1963, pp. 335-52.
Chen, P. C. T., A comparison of flow and deformation theories in a radially stressed annular plate. Trans. ASME, J. Appl. Mech., 40 (1973) 283-7
Bland, D. R. "Elastoplastic thick-walled tubes of work-hardening material subject to internal and external pressures and to temperature gradients."Journal of the Mechanics and Physics of Solids 4.4 (1956): 209-229.
Odintsov, V. A., and V. V. Selivanov. "Behavior of a rigidly plastic cylindrical shell exposed to internal pressure." Journal of Applied Mechanics and Technical Physics 16.3 (1975): 457-460.
Xu Hong &Chen Shuning, An analysis of an autofrettaged cylinder considering strain-hardening effect, Bauchinger effect and temperature dependence of material properties (Part 1 Analysis for open-ended cylinder), In Proceedings of the 6th International Conference on Pressure Vessel Technology, Vol. 1. Pergamon Press, Oxford, 1988, pp. 423-430.
Liu, Yong. "Solution of an open-ended autofrettaged thick-walled cylinder by mixed BEM." J. Zhejang Institute of Technology 2 (1991): 55-60.
Gao, Xin-lin. "An exact elasto-plastic solution for an open-ended thick-walled cylinder of a strain-hardening material." International journal of pressure vessels and piping 52.1 (1992): 129-144.
Gao, X-L. "Elasto-plastic analysis of an internally pressurized thick-walled cylinder using a strain gradient plasticity theory." International journal of solids and structures 40.23 (2003): 6445-6455.
Li, Mao-lin, and Ming-fu Fu. "Limit analysis of viscoplastic thick-walled cylinder and spherical shell under internal pressure using a strain gradient plasticity theory." Applied Mathematics and Mechanics 29 (2008): 1553-1559.
Bagheri, Seyed Masood, “Introduce a new Model for Expansion Behavior of Thick-Walled Cylinder under Internal Explosive Loading with Numerical Analysis” Modares mechanical engineering, 15.3 (2015): 251-259
Lu, W. Y. & Hsu, Y. C. “Elastic-plastic analysis of a flat ring subjected to internal pressure” Acta Mech., 27 (1977) 155-72
Lu An-qi, “Elastic-plastic analysis of stresses around a circular hole in an infinite sheet subjected to equal biaxial tension” Acta Mech. Solida Sinica, 5 (1984) 449-53
Xu Hong & Chen Shuning, “An analysis of an autofrettaged cylinder considering strain-hardening effect, Bauchinger effect and temperature dependence of material properties (Part 1 Analysis for open-ended cylinder)” In Proceedings of the 6th International Conference on Pressure Vessel Technology, Vol. 1. Pergamon Press, Oxford, 1988, pp. 423-430
Liu Yong, “Solution of an open-ended autofrettaged thick-walled cylinder by mixed BEM” J. Zhejang Institute of Technology, (2) (1991) 55-60
Vullo, V. “Circular Cylinders and Pressure Vessels Stress Analysis and Design”; Springer International Publishing: Switzerland, 2014.
Paffumi, E.; Taylor, N. “Structural Response of a Large Pressure Vessel to Dynamic Loading”; JRC Sci.Tech. Rep., 2008.
Yong, L.; Xin, W. L.; Wei, X. L.; Meng, Z. F. “Residual Stress Analysis of a Thick-Walled Cylinder in Dynamic Loading”; Int. J. Pres. Ves. Pip. (IJPVP), Vol. 60, 17-20, 1994
Hojman, Sergio A. "A new conservation law constructed without using either Lagrangians or Hamiltonians." Journal of Physics A: Mathematical and General25.7 (1992): L291.
Elliott, J. Richard, and Carl T. Lira. Introductory chemical engineering thermodynamics. Upper Saddle River, NJ: Prentice Hall PTR, 1999.
Fenner,Roger T. Engineering elasticity. Halsted Press, 1986.
Dobratz, Brigitta M. Properties of chemical explosives and explosive simulants. No. UCRL--51319; UCRL--51319 (REV. 1). comp. and ed.; California Univ., Livermore (USA). Lawrence Livermore Lab., 1972.