Analyzing Vibration Suppression of Nuclear Power Crane with Model Coupling Mechanism and Structure

Yixiao Qin; Qingqing Yang; Yanqing Li; Cuiyun Gu

doi:doi:10.11648/j.ijmea.20160404.11

| Peer-Reviewed

Analyzing Vibration Suppression of Nuclear Power Crane with Model Coupling Mechanism and Structure

Yixiao Qin, Qingqing Yang, Yanqing Li, Cuiyun Gu

Published in International Journal of Mechanical Engineering and Applications (Volume 4, Issue 4)

Received: 24 May 2016 Accepted: 5 June 2016 Published: 18 June 2016

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The nuclear power crane possesses strict safety requirements. Based on the special structure of its hoisting mechanism, it has two sets of independent lifting ropes to drive a hook synchronously and two pressure buffer devices on both ends of winding system’s balancing lever, in order to play protective roles and increase its working reliability. The flexible multi-body dynamics model which coupled mechanism and structure of the nuclear power crane is constructed when broken accident of rope occurs in the lifting process from the ground or smooth lifting. The importance of a buffer damping device installed in crane hoist mechanism has been proved through the vibration simulation about wire rope at the failure state. And the vibration of mechanism and the main girder structure is remitted and controlled at the time of failure in operation. The most important advantage is that has improved the safety of nuclear power crane.

Published in	International Journal of Mechanical Engineering and Applications (Volume 4, Issue 4)
DOI	10.11648/j.ijmea.20160404.11
Page(s)	136-142
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Nuclear Power Crane, Multi-body Dynamics, Coupling Mechanism and Structure, Rope Breaking Fault, Vibration Suppression

References

[1]	P. N. Rizos, N. Aspragathos, A. D. Dimarogonas, Identification of crack location and magnitude in a cantilever beam from the vibration modes, Journal of Sound and Vibration 138 (3) (1990) 381-388.
[2]	S. A. Neild, P. D. Mcfadden, M. S. Williams, A discrete model of a vibrating beam using a time-stepping approach, Journal of Sound and Vibration 239 (1) (2001) 99-121.
[3]	I. Argatov, V. L. Popov, T. Rademacher, M. Zehn, A model of a breathing crack with relaxation damping, International Journal of Engineering Science 93 (2015) 46-50.
[4]	T. G. Chondros, A. D. Dimarogonas, J. Yao, A continuous cracked beam vibration theory, Journal of Sound and Vibration 215 (1) (1998) 17-34.
[5]	W. M. Ostachowicz, M. Krawczuk, Analysis of the effect of cracks on the natural frequencies of a cantilever beam, Journal of Sound and Vibration 150 (2) (1991) 191-201.
[6]	V. Balamurugan, S. Narayanan, Shell finite element for smart piezoelectric composite plate/shell structures and its application to the study of active vibration control, Finite Elements in Analysis and Design 37 (9) (2001) 713-738.
[7]	A. Zolfagharian, A. Noshadi, M. R. Khosravani, M. Z. Md. Zain, Unwanted noise and vibration control using finite element analysis and artificial intelligence, Appl Math Model 38 (9) (2014) 2435-2453.
[8]	S. N. Mahmoodi, M. Ahmadian, Active vibration control with modified positive position feedback, J Dyn Syst Meas Control 131 (4) (2009) 1-8.
[9]	M. I. Friswell, D. J. Inman, The relationship between positive position feedback and output feedback controllers, Smart Mater Struct 8 (3) (1999) 285.
[10]	K. X. Li, J. Y. Gauthier, D. Guyomar, Structural vibration control by synchronized switch damping energy transfer, Journal of Sound and Vibration 330 (2011) 49-60.
[11]	Q. Hu, G. Ma, Adaptive variable structure controller for spacecraft vibration reduction, IEEE Trans Aerosp Electron Syst 44 (3) (2008) 861-876.
[12]	T. M. Seigler, J. B. Hoagg, Filtered dynamic inversion for vibration control of structures with uncertainty, J Dyn Syst Meas Control 135 (4) (2013).
[13]	Y. H. Lin, M. W. Trethewey, Finite element analysis of elastic beams subjected to moving dynamic loads, Journal of Sound and Vibration 136 (2) (1990) 323-342.
[14]	W. Xia, L. Wang, L. Yin, Nonlinear non-classical microscale beams: Static bending, postbuckling and free vibration, International Journal of Engineering Science 48 (2010) 2044-2053.
[15]	H. Alli, A. Uar, Y. Demir, The solutions of vibration control problems using artificial neural networks, Journal of the Franklin Institute 340 (2003) 307-325.
[16]	B. Saldivar, S. Mondie. Drilling vibration reduction via attractive ellipsoid method, Journal of the Franklin Institute 350 (2013) 485-502.
[17]	Y. A. Huang, MATLAB 7.0/Simulink 6.0 Development of modeling and simulation of advanced engineering [M]. Beijing: Tsinghua University Press 12 (2005).

Cite This Article

Plain Text BibTeX RIS

APA Style

Yixiao Qin, Qingqing Yang, Yanqing Li, Cuiyun Gu. (2016). Analyzing Vibration Suppression of Nuclear Power Crane with Model Coupling Mechanism and Structure. International Journal of Mechanical Engineering and Applications, 4(4), 136-142. https://doi.org/10.11648/j.ijmea.20160404.11

Copy | Download

ACS Style

Yixiao Qin; Qingqing Yang; Yanqing Li; Cuiyun Gu. Analyzing Vibration Suppression of Nuclear Power Crane with Model Coupling Mechanism and Structure. Int. J. Mech. Eng. Appl. 2016, 4(4), 136-142. doi: 10.11648/j.ijmea.20160404.11

Copy | Download

AMA Style

Yixiao Qin, Qingqing Yang, Yanqing Li, Cuiyun Gu. Analyzing Vibration Suppression of Nuclear Power Crane with Model Coupling Mechanism and Structure. Int J Mech Eng Appl. 2016;4(4):136-142. doi: 10.11648/j.ijmea.20160404.11

Copy | Download

@article{10.11648/j.ijmea.20160404.11,
  author = {Yixiao Qin and Qingqing Yang and Yanqing Li and Cuiyun Gu},
  title = {Analyzing Vibration Suppression of Nuclear Power Crane with Model Coupling Mechanism and Structure},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {4},
  number = {4},
  pages = {136-142},
  doi = {10.11648/j.ijmea.20160404.11},
  url = {https://doi.org/10.11648/j.ijmea.20160404.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20160404.11},
  abstract = {The nuclear power crane possesses strict safety requirements. Based on the special structure of its hoisting mechanism, it has two sets of independent lifting ropes to drive a hook synchronously and two pressure buffer devices on both ends of winding system’s balancing lever, in order to play protective roles and increase its working reliability. The flexible multi-body dynamics model which coupled mechanism and structure of the nuclear power crane is constructed when broken accident of rope occurs in the lifting process from the ground or smooth lifting. The importance of a buffer damping device installed in crane hoist mechanism has been proved through the vibration simulation about wire rope at the failure state. And the vibration of mechanism and the main girder structure is remitted and controlled at the time of failure in operation. The most important advantage is that has improved the safety of nuclear power crane.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Analyzing Vibration Suppression of Nuclear Power Crane with Model Coupling Mechanism and Structure
AU  - Yixiao Qin
AU  - Qingqing Yang
AU  - Yanqing Li
AU  - Cuiyun Gu
Y1  - 2016/06/18
PY  - 2016
N1  - https://doi.org/10.11648/j.ijmea.20160404.11
DO  - 10.11648/j.ijmea.20160404.11
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 136
EP  - 142
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.20160404.11
AB  - The nuclear power crane possesses strict safety requirements. Based on the special structure of its hoisting mechanism, it has two sets of independent lifting ropes to drive a hook synchronously and two pressure buffer devices on both ends of winding system’s balancing lever, in order to play protective roles and increase its working reliability. The flexible multi-body dynamics model which coupled mechanism and structure of the nuclear power crane is constructed when broken accident of rope occurs in the lifting process from the ground or smooth lifting. The importance of a buffer damping device installed in crane hoist mechanism has been proved through the vibration simulation about wire rope at the failure state. And the vibration of mechanism and the main girder structure is remitted and controlled at the time of failure in operation. The most important advantage is that has improved the safety of nuclear power crane.
VL  - 4
IS  - 4
ER  -

Copy | Download

Author Information

Yixiao Qin

Mechanical Engineering Institution, Taiyuan University of Science and Technology, Taiyuan, Shanxi, China
Qingqing Yang

Mechanical Engineering Institution, Taiyuan University of Science and Technology, Taiyuan, Shanxi, China
Yanqing Li

Mechanical Engineering Institution, Taiyuan University of Science and Technology, Taiyuan, Shanxi, China
Cuiyun Gu

Taiyuan Heavy Industry Limited by Share Ltd, Taiyuan, Shanxi, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Yixiao Qin, Qingqing Yang, Yanqing Li, Cuiyun Gu. (2016). Analyzing Vibration Suppression of Nuclear Power Crane with Model Coupling Mechanism and Structure. International Journal of Mechanical Engineering and Applications, 4(4), 136-142. https://doi.org/10.11648/j.ijmea.20160404.11

Copy | Download

ACS Style

Yixiao Qin; Qingqing Yang; Yanqing Li; Cuiyun Gu. Analyzing Vibration Suppression of Nuclear Power Crane with Model Coupling Mechanism and Structure. Int. J. Mech. Eng. Appl. 2016, 4(4), 136-142. doi: 10.11648/j.ijmea.20160404.11

Copy | Download

AMA Style

Yixiao Qin, Qingqing Yang, Yanqing Li, Cuiyun Gu. Analyzing Vibration Suppression of Nuclear Power Crane with Model Coupling Mechanism and Structure. Int J Mech Eng Appl. 2016;4(4):136-142. doi: 10.11648/j.ijmea.20160404.11

Copy | Download

@article{10.11648/j.ijmea.20160404.11,
  author = {Yixiao Qin and Qingqing Yang and Yanqing Li and Cuiyun Gu},
  title = {Analyzing Vibration Suppression of Nuclear Power Crane with Model Coupling Mechanism and Structure},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {4},
  number = {4},
  pages = {136-142},
  doi = {10.11648/j.ijmea.20160404.11},
  url = {https://doi.org/10.11648/j.ijmea.20160404.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20160404.11},
  abstract = {The nuclear power crane possesses strict safety requirements. Based on the special structure of its hoisting mechanism, it has two sets of independent lifting ropes to drive a hook synchronously and two pressure buffer devices on both ends of winding system’s balancing lever, in order to play protective roles and increase its working reliability. The flexible multi-body dynamics model which coupled mechanism and structure of the nuclear power crane is constructed when broken accident of rope occurs in the lifting process from the ground or smooth lifting. The importance of a buffer damping device installed in crane hoist mechanism has been proved through the vibration simulation about wire rope at the failure state. And the vibration of mechanism and the main girder structure is remitted and controlled at the time of failure in operation. The most important advantage is that has improved the safety of nuclear power crane.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Analyzing Vibration Suppression of Nuclear Power Crane with Model Coupling Mechanism and Structure
AU  - Yixiao Qin
AU  - Qingqing Yang
AU  - Yanqing Li
AU  - Cuiyun Gu
Y1  - 2016/06/18
PY  - 2016
N1  - https://doi.org/10.11648/j.ijmea.20160404.11
DO  - 10.11648/j.ijmea.20160404.11
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 136
EP  - 142
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.20160404.11
AB  - The nuclear power crane possesses strict safety requirements. Based on the special structure of its hoisting mechanism, it has two sets of independent lifting ropes to drive a hook synchronously and two pressure buffer devices on both ends of winding system’s balancing lever, in order to play protective roles and increase its working reliability. The flexible multi-body dynamics model which coupled mechanism and structure of the nuclear power crane is constructed when broken accident of rope occurs in the lifting process from the ground or smooth lifting. The importance of a buffer damping device installed in crane hoist mechanism has been proved through the vibration simulation about wire rope at the failure state. And the vibration of mechanism and the main girder structure is remitted and controlled at the time of failure in operation. The most important advantage is that has improved the safety of nuclear power crane.
VL  - 4
IS  - 4
ER  -

Copy | Download