International Journal of Mechanical Engineering and Applications

| Peer-Reviewed |

Main Weaving Nozzles - Ejectors

Received: 09 September 2014    Accepted: 12 September 2014    Published: 17 October 2014
Views:       Downloads:

Share This Article

Abstract

The paper deals both with numerical flow simulations and experiments in ejectors, used here first of all as main weaving nozzles, further as a source of air suction, etc. The problem of high noise level of expanded air flow is discussed, too.

DOI 10.11648/j.ijmea.s.2015030101.12
Published in International Journal of Mechanical Engineering and Applications (Volume 3, Issue 1-1, January 2015)

This article belongs to the Special Issue Numerical Flow Simulations in Textile Industry

Page(s) 5-12
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Numerical Flow Simulation, Ejector, Weaving Nozzle, Aerodynamic Noise

References
[1] K. Adamek,"Conditions for High-quality and Reliable Air Jet Weft Insertion", Vlákna a textil (Fibers and textiles – in Czech) 5(3), 123-130 (1998), ISSN 1335-0617.
[2] K. Adamek, "Conditions for High-quality and Reliable Air Jet Weft Insertion", 2nd int. conf. Novelties in weaving research, TU Liberec, 1998 (EU project Copernicus).
[3] K. Adamek, "Numerical modelling the air flow in parts of air jet loom", CAMES (Comput. Assist. Mech. and Eng. Sciences), special issue, 6, 251-263, 1999, Polish Academy of Sciences Warsaw.
[4] K. Adamek, "Numerical modelling the air flow in parts of air jet loom", 8th int. conf. on numer. math. and comput. mech. (NMCM98), University of Miskolc, Hungary, 1998.
[5] J. Pelant, K. Adamek, "Boundary value conditions for some 3D axis-symmetrical flow", Proc. ECCOMAS CFD 2001, University of Wales, Swansea, 2001, ISBN 0-905091-11-6.
[6] K. Adamek, "Numerical modelling of air flow in air jet weaving system", Internat. J. Polymeric. Mater., 2000, Vol. 47, pp. 613-623, ISSN ….
[7] K. Adamek, "Numerical modelling of air flow in air jet weaving system", 32nd internat. symp. on novelties in textiles, University of Ljubljana, 1998, ISBN 961-6045-11-3.
[8] K. Adamek, "Numerical modelling of the flow effect on the weft during air jet weaving", VII. Internat. Congress on the Theory of Machines and Mechanisms, TU Liberec, 1996, ISBN 80-7083-198-7 (in Czech).
[9] K. Adamek, "Flow description in the air jet weaving system by FVM", Quo vadis textrinum, NMC Zilina, Strbske Pleso, 1996, ISBN 80-856655-06-3 (in Czech).
[10] K. Adamek, "Experience with FVM in Research of Air Jet Weaving System", Computer Modeling and Simulation in Engineering (CMSE), Vol. 1, Sage Science Press, 1996.
[11] K. Adamek, "Beschreibung der Webduesenstroemung mit FVM", 5. Chemnitzer Textilmaschinen-Tagung, TU Chemnitz, 1995.
[12] K. Adamek, "Design of parts for air jet weft insertion by FVM", Int. Conf. Young textile science, TU Liberec, 1995.
[13] K. Adamek, "Flow description in the air jet weaving system by FVM", Xth. sci. conf. Applic. of exp. meth. in fluid mech., VSDS Zilina, Strba, 1995 (in Czech).
[14] K. Adamek, "Le tissage a jet d’air", seminaire IMST, Univ. Marseille, 1994.
[15] J. Kolar, K. Adamek, V. Dvorak, "Aeroacoustic of jet induced noise", Conference of fluid- and thermomechanics departments on technical universities, 2009 (in Czech).
[16] J. Kolar, K. Adamek, "Aeroacoustic of simple shaped nozzles", EFM 2009 (Exp. Fluid Mech.), TU Liberec, Jicin, 2009, ISBN 978-80-7372-538-9.
[17] J. Simak, "Aeroacoustic analysis of circular nozzle", Transfer, VZLÚ Praha, No. 15, vol. 6, 2011. ISSN 1801-9315 (in Czech).
[18] K. Adamek, "Air flows in nozzles of air jet looms", VIth sci. conf. Applic. of exp. meth. in fluid mech. VSDS Zilina, Jasna, 1987 (in Czech).
[19] K. Adamek, "Applications of numerical flow modeling in designer’s practice", XIVth int. conf. Applic. of exp. and numer. meth. in fluid mech., ZU Zilina, 2004. ISBN 80-8070-234-9 (in Czech).
[20] V. Tesar, "Reversation paradox", Acta technica. ČVUT Praha, 1984 (in Czech).
[21] K. Adamek, J. Pelant, "Reversation flow in ejector", XVIIth sci. conf. Applic. of exp. and numer. meth. in fluid mech. ZU Zilina, Bojnice 2010. ISBN 978-80-554-0189-8 (in Czech).
[22] J. Kolar, K. Adamek, J. Pelant, "Reversation flow in an ejector", Strutex, TU Liberec, 2010. ISBN 978-80-7372-664-5.
[23] S. Gramsch, D. Hietel, "Fadenschuss mittels Luftstrom", report of the Fraunhofer ITWM Kaiserslautern
Author Information
  • VúTS – Centre of Machinery Research, Liberec, Czech Rep

  • VúTS – Centre of Machinery Research, Liberec, Czech Rep

  • VZLú – Aeronautical Research and Testing Institute, Praha, Czech Rep

  • VZLú – Aeronautical Research and Testing Institute, Praha, Czech Rep

  • Fraunhofer ITWM, Kaiserslautern, Germany

Cite This Article
  • APA Style

    Karel Adamek, Jan Kolar, Jaroslav Pelant, Jan Simak, Simone Gramsch. (2014). Main Weaving Nozzles - Ejectors. International Journal of Mechanical Engineering and Applications, 3(1-1), 5-12. https://doi.org/10.11648/j.ijmea.s.2015030101.12

    Copy | Download

    ACS Style

    Karel Adamek; Jan Kolar; Jaroslav Pelant; Jan Simak; Simone Gramsch. Main Weaving Nozzles - Ejectors. Int. J. Mech. Eng. Appl. 2014, 3(1-1), 5-12. doi: 10.11648/j.ijmea.s.2015030101.12

    Copy | Download

    AMA Style

    Karel Adamek, Jan Kolar, Jaroslav Pelant, Jan Simak, Simone Gramsch. Main Weaving Nozzles - Ejectors. Int J Mech Eng Appl. 2014;3(1-1):5-12. doi: 10.11648/j.ijmea.s.2015030101.12

    Copy | Download

  • @article{10.11648/j.ijmea.s.2015030101.12,
      author = {Karel Adamek and Jan Kolar and Jaroslav Pelant and Jan Simak and Simone Gramsch},
      title = {Main Weaving Nozzles - Ejectors},
      journal = {International Journal of Mechanical Engineering and Applications},
      volume = {3},
      number = {1-1},
      pages = {5-12},
      doi = {10.11648/j.ijmea.s.2015030101.12},
      url = {https://doi.org/10.11648/j.ijmea.s.2015030101.12},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ijmea.s.2015030101.12},
      abstract = {The paper deals both with numerical flow simulations and experiments in ejectors, used here first of all as main weaving nozzles, further as a source of air suction, etc. The problem of high noise level of expanded air flow is discussed, too.},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Main Weaving Nozzles - Ejectors
    AU  - Karel Adamek
    AU  - Jan Kolar
    AU  - Jaroslav Pelant
    AU  - Jan Simak
    AU  - Simone Gramsch
    Y1  - 2014/10/17
    PY  - 2014
    N1  - https://doi.org/10.11648/j.ijmea.s.2015030101.12
    DO  - 10.11648/j.ijmea.s.2015030101.12
    T2  - International Journal of Mechanical Engineering and Applications
    JF  - International Journal of Mechanical Engineering and Applications
    JO  - International Journal of Mechanical Engineering and Applications
    SP  - 5
    EP  - 12
    PB  - Science Publishing Group
    SN  - 2330-0248
    UR  - https://doi.org/10.11648/j.ijmea.s.2015030101.12
    AB  - The paper deals both with numerical flow simulations and experiments in ejectors, used here first of all as main weaving nozzles, further as a source of air suction, etc. The problem of high noise level of expanded air flow is discussed, too.
    VL  - 3
    IS  - 1-1
    ER  - 

    Copy | Download

  • Sections