International Journal of Mechanical Engineering and Applications

| Peer-Reviewed |

Flow Numerical Simulation in Various Technologies

Received: 09 September 2014    Accepted: 12 September 2014    Published: 17 October 2014
Views:       Downloads:

Share This Article

Abstract

This paper summarizes some examples of applications of flow numerical simulations in the area of various textile technologies and equipment, as for instance application of vortex tube, fibers production from melted polymer, chemical yarn texturizing by air flow, high-speed bearing. The examples are completed by cases from car industry – independent heater, cavitation in shock absorber.

DOI 10.11648/j.ijmea.s.2015030101.18
Published in International Journal of Mechanical Engineering and Applications (Volume 3, Issue 1-1, January 2015)

This article belongs to the Special Issue Numerical Flow Simulations in Textile Industry

Page(s) 47-52
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Flow Numerical Simulation, High-Speed Bearing, Melt-Blown, Vortex Tube, Yarn Texturizing, Cavitation, Independent Heater

References
[1] M. E. Dejc, "Technical dynamics of gases", GEI Moscow, 1961 (in Russian).
[2] J. Kaniok, "Melt-blown technology", diploma thesis, FT TU Liberec, 1998 (in Czech).
[3] K. Adamek, "Chemical yarn texturizing by air flow", dissertation, TU Liberec, 1981 (in Czech).
[4] K. Adamek, "Shock Waves as a Tool?", 2nd Int. Symp. on Exp. and Comput. Aerothermodynamics of Int. Flows, (Vol. 2, 109-114), Inst. of Thermomech. Acad. of Sciences Prague, 1993, ISBN 80-7015-384-9.
[5] K. Adamek, "Shock waves affecting on yarns", Int. conf. Applic. of exp. meth. in fluid mech., VSDS Zilina, PieSťany, 1993 (in Czech).
[6] K. Adamek, J. Pelant, "Luftstroemung im System fuer Faserbandvorbereitung", 8. Chemnitzer Textilmaschinen- tagung, 203-206, TU Chemnitz, 2001.
[7] K. Adamek, J. Kolar, "Numerical flow simulations used in industrial problems", ECCOMAS 2012, (Europ. Congress on Comput. Meth. in Appl. Sciences and Engineering), TU Wien, ISBN 978-3-9502481-9-7.
[8] J. Pelant, K. Adamek, M. Kyncl, "Application of the 3D NS equations for axis-symmetrical viscous turbulent flow", 6th ICCSM (Int. Congress of Croatian Society of Mechanics), Dubrovnik, 2009. ISBN 978-953-7539-11-5.
[9] J. Pelant, K. Adamek, M. Kyncl, "Application of the NS equations for 3D viscous turbulent flow on bladeless fluid machines", 5th Europ. Congress on Comput. Meth. in Appl. Sciences and Engineering (ECCOMAS), Venice, Italy, 2008. ISBN 978-84-96736-55-9.
[10] J. Kolar, K. Adamek, Optimization of damping unit, 6th int. conf. on Fluid Structure Interaction 2011, Wessex Inst. of Technology Southampton and University of Central Florida Orlando, Orlando, FL-USA, 2011, ISBN 978-1-84564-598.4.
Author Information
  • VUTS – Centre of Machinery Research, Liberec, Czech Rep.

  • VUTS – Centre of Machinery Research, Liberec, Czech Rep.

  • VUTS – Centre of Machinery Research, Liberec, Czech Rep.

  • TUL – Technical University in Liberec, Faculty of Textiles, Liberec, Czech Rep.

  • VZLU – Aeronautical Research and Testing Institute, Prague, Czech Rep.

  • VZLU – Aeronautical Research and Testing Institute, Prague, Czech Rep.

  • RIETER CZ – Ustí Nad Orlicí, Czech Rep.

  • BRANO – Jablonec Nad Nisou, Czech Rep.

Cite This Article
  • APA Style

    Karel Adamek, Pavel Peukert, Jan Kolar, Jozef Kaniok, Jaroslav Pelant, et al. (2014). Flow Numerical Simulation in Various Technologies. International Journal of Mechanical Engineering and Applications, 3(1-1), 47-52. https://doi.org/10.11648/j.ijmea.s.2015030101.18

    Copy | Download

    ACS Style

    Karel Adamek; Pavel Peukert; Jan Kolar; Jozef Kaniok; Jaroslav Pelant, et al. Flow Numerical Simulation in Various Technologies. Int. J. Mech. Eng. Appl. 2014, 3(1-1), 47-52. doi: 10.11648/j.ijmea.s.2015030101.18

    Copy | Download

    AMA Style

    Karel Adamek, Pavel Peukert, Jan Kolar, Jozef Kaniok, Jaroslav Pelant, et al. Flow Numerical Simulation in Various Technologies. Int J Mech Eng Appl. 2014;3(1-1):47-52. doi: 10.11648/j.ijmea.s.2015030101.18

    Copy | Download

  • @article{10.11648/j.ijmea.s.2015030101.18,
      author = {Karel Adamek and Pavel Peukert and Jan Kolar and Jozef Kaniok and Jaroslav Pelant and Martin Kyncl and Jirí Storek and Marcel Havrda},
      title = {Flow Numerical Simulation in Various Technologies},
      journal = {International Journal of Mechanical Engineering and Applications},
      volume = {3},
      number = {1-1},
      pages = {47-52},
      doi = {10.11648/j.ijmea.s.2015030101.18},
      url = {https://doi.org/10.11648/j.ijmea.s.2015030101.18},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ijmea.s.2015030101.18},
      abstract = {This paper summarizes some examples of applications of flow numerical simulations in the area of various textile technologies and equipment, as for instance application of vortex tube, fibers production from melted polymer, chemical yarn texturizing by air flow, high-speed bearing. The examples are completed by cases from car industry – independent heater, cavitation in shock absorber.},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Flow Numerical Simulation in Various Technologies
    AU  - Karel Adamek
    AU  - Pavel Peukert
    AU  - Jan Kolar
    AU  - Jozef Kaniok
    AU  - Jaroslav Pelant
    AU  - Martin Kyncl
    AU  - Jirí Storek
    AU  - Marcel Havrda
    Y1  - 2014/10/17
    PY  - 2014
    N1  - https://doi.org/10.11648/j.ijmea.s.2015030101.18
    DO  - 10.11648/j.ijmea.s.2015030101.18
    T2  - International Journal of Mechanical Engineering and Applications
    JF  - International Journal of Mechanical Engineering and Applications
    JO  - International Journal of Mechanical Engineering and Applications
    SP  - 47
    EP  - 52
    PB  - Science Publishing Group
    SN  - 2330-0248
    UR  - https://doi.org/10.11648/j.ijmea.s.2015030101.18
    AB  - This paper summarizes some examples of applications of flow numerical simulations in the area of various textile technologies and equipment, as for instance application of vortex tube, fibers production from melted polymer, chemical yarn texturizing by air flow, high-speed bearing. The examples are completed by cases from car industry – independent heater, cavitation in shock absorber.
    VL  - 3
    IS  - 1-1
    ER  - 

    Copy | Download

  • Sections