Technical Transformation and Innovation on Refinery Acid Gas Dry Process Acid Plant
American Journal of Chemical Engineering
Volume 8, Issue 4, July 2020, Pages: 90-95
Received: Aug. 18, 2020; Accepted: Aug. 31, 2020; Published: Sep. 21, 2020
Views 48      Downloads 15
Authors
Du Lang, Sinopec Jingmen Branch, Jingmen, China
You Min, Sinopec Jingmen Branch, Jingmen, China
Article Tools
Follow on us
Abstract
This article introduces a new and efficient process and device for acid gas recovery in refining and chemical enterprises-hydrogen sulfide dry acid production process and device. The main problems and failures in the operation of the device are explained, and the related problems and the causes of the failures are analyzed in a targeted manner. In the technical transformation of the base and lining of the acid gas incinerator and the adaptive transformation of the electric defogging system, the development and application of new all-glass steel cooling tower, the implementation of new technologies to improve the efficiency of defogging and acid separation, and the mass transfer and heat transfer efficiency of the process medium, The application of "three units" technology to improve the technical and economic level of the device, the use of sodium-alkali neutralization process to treat the wastewater and tail gas of the device, have unique insights and successful experience, and continue to carry out technical improvement, innovation, integration and application of results for the device. The safety, stability, long-term, economic operation and design and improvement of related fields have important guidance and reference significance.
Keywords
Sulfuric Acid Plant, Acid Gas, Dry Process Acid Production, Technical Transformation
To cite this article
Du Lang, You Min, Technical Transformation and Innovation on Refinery Acid Gas Dry Process Acid Plant, American Journal of Chemical Engineering. Vol. 8, No. 4, 2020, pp. 90-95. doi: 10.11648/j.ajche.20200804.12
Copyright
Copyright © 2020 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
References
[1]
CHANG Hai-yang. Construction Design and Material Selection for H2S Burner, Journal of Sulphur Phosphorus & Bulk Materials Handling Related Engineering, 2018 (04).
[2]
Liu Bolong, Cause Analysis of Blocking and Corrosion of Heat Exchanger for Sulphuric Acid Plant and Protection, Journal of Guizhou Chemical Industry, 1998 (3).
[3]
GAO Li-cun, JIA Yu-chao et al, Influence of Composite Pore Former on Properties of Corundum-anorthite-mullite Light-weight Castables, Journal of Bulletin of the Chinese Ceramic Society, 2011 (5).
[4]
Wu Wenhui, Shi Fei. Structure reconstruction and refractories selection of large horizontal sulphur recovery furnace lining. Journal of Refractories. 2003 (2).
[5]
Qin Guozhi. A NOVEL ACID-AND-ALKALI-RESISTANT NONPERMEABLE GRAPHITE AND ITS APPLICATION. Journal of Petrochemical Corrosion and Protection, 1992 (3).
[6]
DING Zhenyi. Discussion on Thermal Pipeline Compensation and Common Compensators. Journal of Chemical Equipment Technology, 2018 (6).
[7]
ZHANG Jihong, WEI Likai, Failure and maintenance of conductive FRP electrostatic demister, Journal of Sulphuric Acid Industry, 2018 (8).
[8]
YE Jianying, ZHOU Shuzhen, Choice and use of mist eliminators of drying and absorption towers in sulphuric acid systems, Journal of Sulphuric Acid Industry, 2004 (1).
[9]
WANG Yuhuan, Application of Balanced Pressure and Stabilized Flow Type Acid Distributor in Sulphuric Acid Plant, Journal of Sulphur Phosphorus & Bulk Materials Handling Related Engineering, 2019 (2).
[10]
Luo Fengge, Shao Haiwen, Ni Zhengyu, et al. Development and Application of Corrosion Resistant Cast Alloy for High Temperature Concentrated Sulphuric Acid Pumps, Journal of Sulphuric Acid Industry, 1997 (5).
[11]
Yang Jianhong, Failure analysis of engineering plastic pump. Journal of Coastal Enterprises and Science & Technology, 2011 (6).
[12]
Li Yan, Application of Glass Fiber Reinforced Plastic Pipeline in a Large Chemical Plant, Journal of Chemical Engineering Design, 2020 (2).
[13]
Zhang Qi. Research on Anti-Surge Control Technology of Three Units of 4.8 Million Tons/Year Catalytic Unit, Journal of Electronic Instrumentation Customers, 2019 (10).
[14]
HU Jia. Energy saving and environmental protection design in treating tail gas from sulphuric acid plant of refinery, Journal of Sulphuric Acid Industry, 2017 (04).
[15]
LIN Xupeng, LI Maoxian, ZHANG Weibing, Practice and upgrading optimization of the desulphurization system with caustic soda, Journal of Sulphuric Acid Industry, 2018 (7).
[16]
WANG Guocai, Application of sodium hydroxide alkali process in the treatment of sulphuric acid tail gas, Journal of Sulphuric Acid Industry, 2018 (4).
ADDRESS
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
U.S.A.
Tel: (001)347-983-5186