| Peer-Reviewed

The Effect of Polyethylene Glycol (PEG) on the Performance of Natural Zeolite-PVA Hybrid Ceramic Membrane for Desalination

Received: 30 January 2020    Accepted: 17 February 2020    Published: 25 February 2020
Views:       Downloads:
Abstract

The seawater desalination process currently uses membrane technology because of relatively lower investment and energy requirements. The process of seawater desalination using membrane process technology can be done in 3 methods, namely reverse osmosis (RO), distillation membrane (membrane distillation / MD) and pervaporation process (PV). This study will examine the performance of a hybrid membrane developed from natural zeolite-TiO2 with polyvinyl alcohol (PVA) in addition to polyethylene glycol (PEG) for desalination of seawater. The addition of PEG to the PVA polymer solution (dope) will increase the membrane resistance (Rm) and seawater rejection. The higher rejection is achieved of 93.77% at the addition of 6% PEG. Fouling resistance (Rf) isn’t affected by PEG concentration. The fouling resistance has good linearity and stability at the addition of 6% PEG.

Published in American Journal of Chemical Engineering (Volume 8, Issue 1)
DOI 10.11648/j.ajche.20200801.11
Page(s) 1-4
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Hybride Membrane, Desalination, Natural Zeolite

References
[1] M. Elma, C. Yacou, D. K. Wang, S. Smart, and J. C. Diniz, “Microporous Silica Based Membranes for Desalination,” Water, vol. 4, pp. 629–649, 2012.
[2] G. Liu, W. Wei, W. Jin, and N. Xu, “Polymer/ceramic composite membranes and their application in pervaporation process,” Chinese J. Chem. Eng., vol. 20, no. 1, pp. 62–70, 2012.
[3] D. da S. Biron, P. Poletto, J. Duarte, M. Zeni, C. Perez, and V. dos Santos, “Preparation and Characterization of PA66/Alumina Composite Membrane Dionisio,” Mater. Res., vol. 18, no. 4, pp. 748–755, 2015.
[4] Y. Jeong, S. Lee, S. Hong, and C. Park, “Preparation, characterization and application of low-cost pyrophyllite-alumina composite ceramic membranes for treating low-strength domestic wastewater,” J. Memb. Sci., vol. 536, pp. 108-115, 2017.
[5] Y. Jeong, Y. Kim, Y. Jin, S. Hong, and C. Park, “Comparison of filtration and treatment performance between polymeric and ceramic membranes in anaerobic membrane bioreactor treatment of domestic wastewater,” Sep. Purif. Technol., vol. 199, pp. 182–188, 2018.
[6] P. S. Goh and A. F. Ismail, “A review on inorganic membranes for desalination and wastewater treatment,” Desalination, vol. 434, pp. 130 – 155, 2018.
[7] Z. Xie, D. Ng, M. Hoang, and J. Zhang, “Study of Hybrid PVA / MA / TEOS Pervaporation Membrane and Evaluation of Energy Requirement for Desalination by Pervaporation,” Environ. Res. Public Heal., vol. 15, no. 1913, pp. 1–18, 2018.
[8] S. Tao, Y. Xu, J. Gu, H. Abadikhah, J. Wang, and X. Xu, “Preparation of high-efficiency ceramic planar membrane and its application for water desalination,” J. Adv. Ceram., vol. 7, no. 2, pp. 117–123, 2018.
[9] J. Kujawa, S. Cerneaux, W. Kujawski, and K. Knozowska, “Hydrophobic Ceramic Membranes for Water Desalination,” Appl. Sci., 7, pp. 1–11, 2017.
[10] A. Ruiz-Garcia, N. Melian-Mantel, and I. Nuez, “Short Review on Predicting Fouling in RO Desalination,” Membranes (Basel)., vol. 7, no. 62, pp. 1–17, 2017.
[11] P. S. Goh, W. J. Lau, M. H. D. Othman, and A. F. Ismail, “Membrane fouling in desalination and its mitigation strategies,” Desalination, vol. 425, no. October, pp. 130–155, 2018.
[12] A. Ma’Ruf and M. A. S. Al Fathoni, “Development of porous ceramic membrane from natural zeolite - Clay for microfiltration,” IOP Conf. Ser. Mater. Sci. Eng., vol. 403, no. 1, pp. 0–5, 2018.
[13] A. Ma’ruf, A. S. Al Fathoni, A. M. Purnawanto, and R. A. Kusumajati, “Development of Hybrid Membrane from Clay / TiO 2 -PVA for Batik Wastewater Treatment,” Nat. Environ. Pollut. Technol., vol. 18, no. 4, pp. 1249–1255, 2019.
[14] D. J. Miller, S. Kasemset, D. R. Paul, and B. D. Freeman, “Comparison of membrane fouling at constant flux and constant transmembrane pressure conditions,” J. Memb. Sci., vol. 454, pp. 505–515, 2014.
[15] A. Al Mayyahi and B. Deng, “Efficient water desalination using photo-responsive ZnO polyamide thin film nanocomposite membrane,” Env. Chem. Let., vol. 16, no. 4., pp. 1469–1475, 2018.
Cite This Article
  • APA Style

    Anwar Ma’ruf, Moechammad Agus Salim Al Fathoni, Agus Mulyadi Purnawanto, Linatul Chulqi. (2020). The Effect of Polyethylene Glycol (PEG) on the Performance of Natural Zeolite-PVA Hybrid Ceramic Membrane for Desalination. American Journal of Chemical Engineering, 8(1), 1-4. https://doi.org/10.11648/j.ajche.20200801.11

    Copy | Download

    ACS Style

    Anwar Ma’ruf; Moechammad Agus Salim Al Fathoni; Agus Mulyadi Purnawanto; Linatul Chulqi. The Effect of Polyethylene Glycol (PEG) on the Performance of Natural Zeolite-PVA Hybrid Ceramic Membrane for Desalination. Am. J. Chem. Eng. 2020, 8(1), 1-4. doi: 10.11648/j.ajche.20200801.11

    Copy | Download

    AMA Style

    Anwar Ma’ruf, Moechammad Agus Salim Al Fathoni, Agus Mulyadi Purnawanto, Linatul Chulqi. The Effect of Polyethylene Glycol (PEG) on the Performance of Natural Zeolite-PVA Hybrid Ceramic Membrane for Desalination. Am J Chem Eng. 2020;8(1):1-4. doi: 10.11648/j.ajche.20200801.11

    Copy | Download

  • @article{10.11648/j.ajche.20200801.11,
      author = {Anwar Ma’ruf and Moechammad Agus Salim Al Fathoni and Agus Mulyadi Purnawanto and Linatul Chulqi},
      title = {The Effect of Polyethylene Glycol (PEG) on the Performance of Natural Zeolite-PVA Hybrid Ceramic Membrane for Desalination},
      journal = {American Journal of Chemical Engineering},
      volume = {8},
      number = {1},
      pages = {1-4},
      doi = {10.11648/j.ajche.20200801.11},
      url = {https://doi.org/10.11648/j.ajche.20200801.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajche.20200801.11},
      abstract = {The seawater desalination process currently uses membrane technology because of relatively lower investment and energy requirements. The process of seawater desalination using membrane process technology can be done in 3 methods, namely reverse osmosis (RO), distillation membrane (membrane distillation / MD) and pervaporation process (PV). This study will examine the performance of a hybrid membrane developed from natural zeolite-TiO2 with polyvinyl alcohol (PVA) in addition to polyethylene glycol (PEG) for desalination of seawater. The addition of PEG to the PVA polymer solution (dope) will increase the membrane resistance (Rm) and seawater rejection. The higher rejection is achieved of 93.77% at the addition of 6% PEG. Fouling resistance (Rf) isn’t affected by PEG concentration. The fouling resistance has good linearity and stability at the addition of 6% PEG.},
     year = {2020}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - The Effect of Polyethylene Glycol (PEG) on the Performance of Natural Zeolite-PVA Hybrid Ceramic Membrane for Desalination
    AU  - Anwar Ma’ruf
    AU  - Moechammad Agus Salim Al Fathoni
    AU  - Agus Mulyadi Purnawanto
    AU  - Linatul Chulqi
    Y1  - 2020/02/25
    PY  - 2020
    N1  - https://doi.org/10.11648/j.ajche.20200801.11
    DO  - 10.11648/j.ajche.20200801.11
    T2  - American Journal of Chemical Engineering
    JF  - American Journal of Chemical Engineering
    JO  - American Journal of Chemical Engineering
    SP  - 1
    EP  - 4
    PB  - Science Publishing Group
    SN  - 2330-8613
    UR  - https://doi.org/10.11648/j.ajche.20200801.11
    AB  - The seawater desalination process currently uses membrane technology because of relatively lower investment and energy requirements. The process of seawater desalination using membrane process technology can be done in 3 methods, namely reverse osmosis (RO), distillation membrane (membrane distillation / MD) and pervaporation process (PV). This study will examine the performance of a hybrid membrane developed from natural zeolite-TiO2 with polyvinyl alcohol (PVA) in addition to polyethylene glycol (PEG) for desalination of seawater. The addition of PEG to the PVA polymer solution (dope) will increase the membrane resistance (Rm) and seawater rejection. The higher rejection is achieved of 93.77% at the addition of 6% PEG. Fouling resistance (Rf) isn’t affected by PEG concentration. The fouling resistance has good linearity and stability at the addition of 6% PEG.
    VL  - 8
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Chemical Engineering Department, Faculty of Engineering and Science, Universitas Muhammadiyah Purwokerto, Purwokerto, Indonesia

  • Civil Engineering Department, Faculty of Engineering and Science, Universitas Muhammadiyah Purwokerto, Purwokerto, Indonesia

  • Agrotechnology Department, Faculty of Agriculture, Universitas Muhammadiyah Purwokerto, Purwokerto, Indonesia

  • Chemical Engineering Department, Faculty of Engineering and Science, Universitas Muhammadiyah Purwokerto, Purwokerto, Indonesia

  • Sections