| Peer-Reviewed

Single and Multiband UWB Circular Patch Antenna for Wireless Communication Applications

Received: 15 August 2015    Accepted: 27 August 2015    Published: 7 September 2015
Views:       Downloads:
Abstract

This paper presents the design of an ultra-wide band (UWB) circular patch antenna with microstrip line feed and optimization of various antenna parameters. The antenna with dimension of (33 x 30 x 1.5) mm3 is fabricated on FR-4 epoxy substrate having permittivity constant εr=4.3, loss tangent tanδ=0.002. The designed antenna has the capability of operating in the bands (2.7-4) GHz, (6.8-12.5) GHz and (14.6-18) GHz. The antenna performance was modified by inserting a slot in the ground plane to achieve impedance bandwidth (S11<-10dB) in (2.7-20) GHz. The modified antenna was fabricated and tested using the vector network analyzer. The simulated and measured results are presented and compared. The feed line used has characteristic impedance of 50Ω.

Published in American Journal of Electromagnetics and Applications (Volume 3, Issue 3)
DOI 10.11648/j.ajea.20150303.11
Page(s) 16-23
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Microstrip Antenna, Standing Wave Ratio, Field Configuration, Circular Patch Antenna

References
[1] Marjan Mokhtaari, Jens. Borneman" Directional ultra-wideband Antennas in planar technologies", Proceeding of the 8th microwave conference, pp 885-888, 2008.
[2] B. J. Kwaha, O. N Inyang, P. Amalu, "The circular microstrip patch antenna – design and implementation," IJRRAS, vol 8, Issue 1, pp86-95, 2011.
[3] C. A. Balanis, “Modern Antenna Handbook”, John Wiley and Sons, 2008.
[4] Gonca, Cakir. "Design simulation and tests of low-cost microstrip patch antenna arrays for the wireless communication", Turk J Elect Engin, 13 (1). 2005.
[5] 5. Richards W. F. “Antenna Handbook, Theory, Applications and Design”, Editors, Y. T. Lo, S. W. Lee, 1988.
[6] Debashish pal. "Design of an ultra wide- band fractal antenna for microwave applications", Internal Journal of Advanced Research in Electronics and Communication Engineering (IJARECE), volume 3, pp1302-1305, 2014.
[7] W. Mahar, M. A. Tahir, F. ABhatti."Compact patch antenna for ultra wide-band applications" PIERS Proceeding, Stockholm, Sweden, pp 1100-1104, 2013.
[8] Baskaran Kasi, Lee Ping, Chanden Chakrabarty."Acompact microstrip antenna for ultra wide-band applications" Europen Journal of Scientific Research, Vol 67, No.1, pp45-51, 2011.
[9] Swapnali Shinde, R. P. Labde, Design of a planar monopole ultra wide-band patch antenna" International Journal of Electrical and Electronics Engineering Research (IJEEER).Vol.4, pp47-52, 2014.
[10] Ajay Yadav, Atishya Malav." Microstip antenna with WIMAX notched band characteristics" International Journal of Recent Research and Review, Vol. VII, Issue 2, 2014.
Cite This Article
  • APA Style

    Raad H. Thaher. (2015). Single and Multiband UWB Circular Patch Antenna for Wireless Communication Applications. American Journal of Electromagnetics and Applications, 3(3), 16-23. https://doi.org/10.11648/j.ajea.20150303.11

    Copy | Download

    ACS Style

    Raad H. Thaher. Single and Multiband UWB Circular Patch Antenna for Wireless Communication Applications. Am. J. Electromagn. Appl. 2015, 3(3), 16-23. doi: 10.11648/j.ajea.20150303.11

    Copy | Download

    AMA Style

    Raad H. Thaher. Single and Multiband UWB Circular Patch Antenna for Wireless Communication Applications. Am J Electromagn Appl. 2015;3(3):16-23. doi: 10.11648/j.ajea.20150303.11

    Copy | Download

  • @article{10.11648/j.ajea.20150303.11,
      author = {Raad H. Thaher},
      title = {Single and Multiband UWB Circular Patch Antenna for Wireless Communication Applications},
      journal = {American Journal of Electromagnetics and Applications},
      volume = {3},
      number = {3},
      pages = {16-23},
      doi = {10.11648/j.ajea.20150303.11},
      url = {https://doi.org/10.11648/j.ajea.20150303.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajea.20150303.11},
      abstract = {This paper presents the design of an ultra-wide band (UWB) circular patch antenna with microstrip line feed and optimization of various antenna parameters. The antenna with dimension of (33 x 30 x 1.5) mm3 is fabricated on FR-4 epoxy substrate having permittivity constant εr=4.3, loss tangent tanδ=0.002. The designed antenna has the capability of operating in the bands (2.7-4) GHz, (6.8-12.5) GHz and (14.6-18) GHz. The antenna performance was modified by inserting a slot in the ground plane to achieve impedance bandwidth (S11<-10dB) in (2.7-20) GHz. The modified antenna was fabricated and tested using the vector network analyzer. The simulated and measured results are presented and compared. The feed line used has characteristic impedance of 50Ω.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Single and Multiband UWB Circular Patch Antenna for Wireless Communication Applications
    AU  - Raad H. Thaher
    Y1  - 2015/09/07
    PY  - 2015
    N1  - https://doi.org/10.11648/j.ajea.20150303.11
    DO  - 10.11648/j.ajea.20150303.11
    T2  - American Journal of Electromagnetics and Applications
    JF  - American Journal of Electromagnetics and Applications
    JO  - American Journal of Electromagnetics and Applications
    SP  - 16
    EP  - 23
    PB  - Science Publishing Group
    SN  - 2376-5984
    UR  - https://doi.org/10.11648/j.ajea.20150303.11
    AB  - This paper presents the design of an ultra-wide band (UWB) circular patch antenna with microstrip line feed and optimization of various antenna parameters. The antenna with dimension of (33 x 30 x 1.5) mm3 is fabricated on FR-4 epoxy substrate having permittivity constant εr=4.3, loss tangent tanδ=0.002. The designed antenna has the capability of operating in the bands (2.7-4) GHz, (6.8-12.5) GHz and (14.6-18) GHz. The antenna performance was modified by inserting a slot in the ground plane to achieve impedance bandwidth (S11<-10dB) in (2.7-20) GHz. The modified antenna was fabricated and tested using the vector network analyzer. The simulated and measured results are presented and compared. The feed line used has characteristic impedance of 50Ω.
    VL  - 3
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • College of Engineering, Al-Mustansiryah University, Baghdad, Iraq

  • Sections