American Journal of Nano Research and Applications

| Peer-Reviewed |

The Effect of Aggressive Biological Materials on a Painted Automotive Body Surface Roughness

Received: 27 February 2015    Accepted: 09 March 2015    Published: 14 March 2015
Views:       Downloads:

Share This Article

Abstract

There are different aggressive biological materials which may potentially deposit on a painted automotive body surface during its service life, causing possible local damage, loss of appearance and loss of protective aspects of the system. In this study, the effect of two types of aggressive biological materials on a painted automotive body surface, i.e., natural bird droppings and raw eggs were studied and subsequently explained in more detail. Furthermore, two different testing conditions approaches including in-door and out-door were utilized in order to investigate the surface roughness, Ra, and also to study the behavior of biologically degraded automotive body surface at nano-level scale. The effects of these biological materials on a painted automotive body surface and its appearance were investigated by Atomic Force Microscopy (AFM) and a stylus-based inductive gauge (Taly-surf®, from Taylor Hobson, Inc.), having electromagnetic control of the contact force. Engaged vertically on the top of the specimens, the force could be set much lower than the weight. Results showed that natural bird droppings and raw eggs have a dramatic effect on the appearance and surface roughness of a painted automotive surface body. It was also found that the degradation which occurred due to the natural bird droppings was more severe than that of the samples exposed to raw eggs.

DOI 10.11648/j.nano.20150302.12
Published in American Journal of Nano Research and Applications (Volume 3, Issue 2, March 2015)
Page(s) 17-26
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Biological, Automotive, Bird Droppings, Raw Eggs, Roughness

References
[1] Ansdell, D.A., 10 - Automotive paints, in Paint and Surface Coatings (Second Edition), R. Lambourne and T.A. Strivens, Editors. 1999, Woodhead Publishing. p. 411-491.
[2] Yari, H., et al., Investigating the degradation resistance of silicone-acrylate containing automotive clearcoats exposed to bird droppings. Progress in Organic Coatings, 2012. 75(3): p. 170-177.
[3] Nichols, M.E., 20 - Paint Weathering Tests, in Handbook of Environmental Degradation of Materials (Second Edition), M. Kutz, Editor. 2012, William Andrew Publishing: Oxford. p. 597-619.
[4] Mohseni, M., B. Ramezanzadeh, and H. Yari, Effects of Environmental Conditions on Degradation of Automotive Coatings, New Trends and Developments in Automotive Industry. 1st ed, ed. P.M. Chiaberge. 2011, Croatia: In Tech Publisher. 394.
[5] Tahmassebi, N., et al., Effect of addition of hydrophobic nano silica on viscoelastic properties and scratch resistance of an acrylic/melamine automotive clearcoat. Tribology International, 2010. 43(3): p. 685-693.
[6] Ramezanzadeh, B., M. Mohseni, and H. Yari, On the electrochemical and structural behavior of biologically degraded automotive coatings; Part 1: Effect of natural and simulated bird droppings. Progress in Organic Coatings, 2011. 71(1): p. 19-31.
[7] Ramezanzadeh, B., M. Mohseni, and H. Yari, The role of basecoat pigmentation on the biological resistance of an automotive clearcoat. Journal of Coatings Technology and Research, 2010. 7(6): p. 677-689.
[8] Rezvani Moghaddam, A., et al., Studying the rheology, optical clarity and surface tension of an acrylic/melamine automotive clearcoat loaded with different additives. Progress in Organic Coatings, 2014. 77(1): p. 101-109.
[9] Yari, H., M. Mohseni, and B. Ramezanzadeh, Comparisons of weathering performance of two automotive refinish coatings: A case study. Journal of Applied Polymer Science, 2009. 111(6): p. 2946-2956.
[10] Nguyen, T., et al., Relating laboratory and outdoor exposure of coatings: II. Journal of Coatings Technology, 2002. 74(932): p. 65-80.
[11] Schulz, U., et al., The effects of acid rain on the appearance of automotive paint systems studied outdoors and in a new artificial weathering test. Progress in Organic Coatings, 2000. 40(1–4): p. 151-165.
[12] Ramezanzadeh, B., et al., An evaluation of an automotive clear coat performance exposed to bird droppings under different testing approaches. Progress in Organic Coatings, 2009. 66(2): p. 149-160.
[13] Ramezanzadeh, B., et al., A study of thermal–mechanical properties of an automotive coating exposed to natural and simulated bird droppings. Journal of Thermal Analysis and Calorimetry, 2010. 102(1): p. 13-21.
[14] Ramezanzadeh, B., M. Mohseni, and N. Naseh, Effects of different silicon-based surface active additives on degradability of clearcoats exposed to bird droppings. Journal of Coatings Technology and Research, 2014. 11(4): p. 533-543.
[15] Ramezanzadeh, B., M. Mohseni, and H. Yari, The Effect of Natural Tree Gum and Environmental Condition on the Degradation of a Typical Automotive Clear Coat. Journal of Polymers and the Environment, 2010. 18(4): p. 545-557.
[16] Yari, H., et al., Use of analytical techniques to reveal the influence of chemical structure of clearcoat on its biological degradation caused by bird-droppings. Progress in Organic Coatings, 2009. 66(3): p. 281-290.
[17] Rabea, A.M., M. Mohseni, and S.M. Mirabedini, Investigating the antigraffiti properties of a polyurethane clearcoat containing a silicone polyacrylate additive. Journal of Coatings Technology and Research, 2011. 8(4): p. 497-503.
[18] Mori, K., et al., Mechanism of acid rain etching of acrylic–melamine coatings. Progress in Organic Coatings, 1999. 36(1–2): p. 34-38.
[19] Nguyen, T., et al., Relating laboratory and outdoor exposure of coatingsIII. Effect of relative humidity on moisture-enhanced photolysis of acrylic-melamine coatings. Polymer Degradation and Stability, 2002. 77(1): p. 1-16.
[20] Nguyen, T., J. Martin, and E. Byrd, Relating laboratory and outdoor exposure of coatings: IV. Mode and mechanism for hydrolytic degradation of acrylic-melamine coatings exposed to water vapor in the absence of UV light. Journal of Coatings Technology, 2003. 75(941): p. 37-50.
[21] Palm, M. and B. Carlsson, New accelerated weathering tests including acid rain. Journal of Coatings Technology, 2002. 74(924): p. 69-74.
[22] Stevani, C.V., et al., Mechanism of automotive clearcoat damage by dragonfly eggs investigated by surface enhanced Raman scattering. Polymer Degradation and Stability, 2000. 68(1): p. 61-66.
[23] Yari, H., M. Mohseni, and B. Ramezanzadeh, A mechanistic study of degradation of a typical automotive clearcoat caused by bird droppings. Journal of Coatings Technology and Research, 2011. 8(1): p. 83-95.
[24] Naseh, N., M. Mohseni, and B. Ramezanzadeh, Preparation of surface energy controlled automotive clearcoats loaded with functional silicon additives: Studying the resistance against tree gum attack. Journal of Industrial and Engineering Chemistry, 2014. 20(4): p. 1402-1410.
[25] Nagata, M., et al., Synthesis, characterization, and enzymatic degradation of network aliphatic copolyesters. Journal of Polymer Science Part A: Polymer Chemistry, 1999. 37(13): p. 2005-2011.
[26] Matheson, L.A., J.P. Santerre, and R.S. Labow, Changes in macrophage function and morphology due to biomedical polyurethane surfaces undergoing biodegradation. Journal of Cellular Physiology, 2004. 199(1): p. 8-19.
[27] Chapanian, R., et al., The role of oxidation and enzymatic hydrolysis on the in vivo degradation of trimethylene carbonate based photocrosslinkable elastomers. Biomaterials, 2009. 30(3): p. 295-306.
[28] Majumder, K. and J. Wu, Angiotensin I Converting Enzyme Inhibitory Peptides from Simulated in Vitro Gastrointestinal Digestion of Cooked Eggs. Journal of Agricultural and Food Chemistry, 2009. 57(2): p. 471-477.
[29] Mine, Y. and M.K. Roy, 4.46 - Egg Components for Heart Health: Promise and Progress for Cardiovascular Protective Functional Food Ingredient, in Comprehensive Biotechnology (Second Edition), M. Moo-Young, Editor. 2011, Academic Press: Burlington. p. 553-565.
[30] Kerver, J.M., Y. Park, and W.O. Song, The Role of Eggs in American Diets: Health Implications and Benefits, in Eggs and Health Promotion. 2008, Iowa State Press. p. 9-18.
[31] Stevani, C.V., et al., Automotive clearcoat damage due to oviposition of dragonflies. Journal of Applied Polymer Science, 2000. 75(13): p. 1632-1639.
[32] Dong, W.P., P.J. Sullivan, and K.J. Stout, Comprehensive study of parameters for characterizing three-dimensional surface topography I: Some inherent properties of parameter variation. Wear, 1992. 159(2): p. 161-171.
[33] Dong, W.P., P.J. Sullivan, and K.J. Stout, Comprehensive study of parameters for characterizing three-dimensional surface topography II: Statistical properties of parameter variation. Wear, 1993. 167(1): p. 9-21.
[34] Dong, W.P., P.J. Sullivan, and K.J. Stout, Comprehensive study of parameters for characterising three- dimensional surface topography: III: Parameters for characterising amplitude and some functional properties. Wear, 1994. 178(1–2): p. 29-43.
[35] Dong, W.P., P.J. Sullivan, and K.J. Stout, Comprehensive study of parameters for characterising three-dimensional surface topography: IV: Parameters for characterising spatial and hybrid properties. Wear, 1994. 178(1–2): p. 45-60.
[36] Thomas, T.R., Characterization of surface roughness. Precision Engineering, 1981. 3(2): p. 97-104.
[37] Braun, J.H., Titanium dioxide's contribution to the durability of paint films. Progress in Organic Coatings, 1987. 15(3): p. 249-260.
[38] Y. B. Gerbig, A.R. Phani, H. Haefke, Influence of nanoscale topography on the hydrophobicity of fluoro-based polymer thin films, Applied Surface Science 242 (2005) 251–255.
Author Information
  • Mechanical Engineering Department, Collage of Engineering and Islamic Architecture, Umm Al-Qura University, Makkah, Saudi Arabia

  • Chemistry Department, Collage of Science, Umm Al-Qura University, Makkah, Saudi Arabia

Cite This Article
  • APA Style

    Mohammad Shukri Alsoufi, Tahani Mohammad Bawazeer. (2015). The Effect of Aggressive Biological Materials on a Painted Automotive Body Surface Roughness. American Journal of Nano Research and Applications, 3(2), 17-26. https://doi.org/10.11648/j.nano.20150302.12

    Copy | Download

    ACS Style

    Mohammad Shukri Alsoufi; Tahani Mohammad Bawazeer. The Effect of Aggressive Biological Materials on a Painted Automotive Body Surface Roughness. Am. J. Nano Res. Appl. 2015, 3(2), 17-26. doi: 10.11648/j.nano.20150302.12

    Copy | Download

    AMA Style

    Mohammad Shukri Alsoufi, Tahani Mohammad Bawazeer. The Effect of Aggressive Biological Materials on a Painted Automotive Body Surface Roughness. Am J Nano Res Appl. 2015;3(2):17-26. doi: 10.11648/j.nano.20150302.12

    Copy | Download

  • @article{10.11648/j.nano.20150302.12,
      author = {Mohammad Shukri Alsoufi and Tahani Mohammad Bawazeer},
      title = {The Effect of Aggressive Biological Materials on a Painted Automotive Body Surface Roughness},
      journal = {American Journal of Nano Research and Applications},
      volume = {3},
      number = {2},
      pages = {17-26},
      doi = {10.11648/j.nano.20150302.12},
      url = {https://doi.org/10.11648/j.nano.20150302.12},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.nano.20150302.12},
      abstract = {There are different aggressive biological materials which may potentially deposit on a painted automotive body surface during its service life, causing possible local damage, loss of appearance and loss of protective aspects of the system. In this study, the effect of two types of aggressive biological materials on a painted automotive body surface, i.e., natural bird droppings and raw eggs were studied and subsequently explained in more detail. Furthermore, two different testing conditions approaches including in-door and out-door were utilized in order to investigate the surface roughness, Ra, and also to study the behavior of biologically degraded automotive body surface at nano-level scale. The effects of these biological materials on a painted automotive body surface and its appearance were investigated by Atomic Force Microscopy (AFM) and a stylus-based inductive gauge (Taly-surf®, from Taylor Hobson, Inc.), having electromagnetic control of the contact force. Engaged vertically on the top of the specimens, the force could be set much lower than the weight. Results showed that natural bird droppings and raw eggs have a dramatic effect on the appearance and surface roughness of a painted automotive surface body. It was also found that the degradation which occurred due to the natural bird droppings was more severe than that of the samples exposed to raw eggs.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - The Effect of Aggressive Biological Materials on a Painted Automotive Body Surface Roughness
    AU  - Mohammad Shukri Alsoufi
    AU  - Tahani Mohammad Bawazeer
    Y1  - 2015/03/14
    PY  - 2015
    N1  - https://doi.org/10.11648/j.nano.20150302.12
    DO  - 10.11648/j.nano.20150302.12
    T2  - American Journal of Nano Research and Applications
    JF  - American Journal of Nano Research and Applications
    JO  - American Journal of Nano Research and Applications
    SP  - 17
    EP  - 26
    PB  - Science Publishing Group
    SN  - 2575-3738
    UR  - https://doi.org/10.11648/j.nano.20150302.12
    AB  - There are different aggressive biological materials which may potentially deposit on a painted automotive body surface during its service life, causing possible local damage, loss of appearance and loss of protective aspects of the system. In this study, the effect of two types of aggressive biological materials on a painted automotive body surface, i.e., natural bird droppings and raw eggs were studied and subsequently explained in more detail. Furthermore, two different testing conditions approaches including in-door and out-door were utilized in order to investigate the surface roughness, Ra, and also to study the behavior of biologically degraded automotive body surface at nano-level scale. The effects of these biological materials on a painted automotive body surface and its appearance were investigated by Atomic Force Microscopy (AFM) and a stylus-based inductive gauge (Taly-surf®, from Taylor Hobson, Inc.), having electromagnetic control of the contact force. Engaged vertically on the top of the specimens, the force could be set much lower than the weight. Results showed that natural bird droppings and raw eggs have a dramatic effect on the appearance and surface roughness of a painted automotive surface body. It was also found that the degradation which occurred due to the natural bird droppings was more severe than that of the samples exposed to raw eggs.
    VL  - 3
    IS  - 2
    ER  - 

    Copy | Download

  • Sections