How the Drilling Fluids Can be Made More Efficient by Using Nanomaterials

Mortatha Saadoon Al-Yasiri; Waleed Tareq Al-Sallami

doi:doi:10.11648/j.nano.20150303.12

| Peer-Reviewed

How the Drilling Fluids Can be Made More Efficient by Using Nanomaterials

Mortatha Saadoon Al-Yasiri, Waleed Tareq Al-Sallami

Published in American Journal of Nano Research and Applications (Volume 3, Issue 3)

Received: 23 March 2015 Accepted: 3 April 2015 Published: 14 April 2015

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Drilling fluids serve many objectives in a drilling process, including the elimination of cuttings, lubricating and cooling the drill bits, supporting the stability of the hole and preventing the inflow-outflow of fluids between borehole and the formation. However, with increasing production from non-conventional reservoirs, the stability and effectiveness of traditional drilling fluids under high temperature and high pressure (HTHP) environment have become big concerns. Both water and oil based drilling fluids are likely to experience a number of deteriorations such as gelation, degradation of weighting materials and breakdown of polymeric additives under HTHP conditions. Recently, nanotechnology has shown a lot of promise in the oil and gas sectors, including nanoparticle-based drilling fluids. This paper aims to explore and assess the influence of various nanoparticles on the performance of drilling fluids to make the drilling operation smooth, cost effective and efficient. In order to achieve this aim, the article will begin by explaining the important role that drilling fluid plays during the drilling process with a historical review of drilling fluid industry development. Then, definitions, uses and types of drilling fluid will be demonstrated as well as, the additives that are appended in order to enhance drilling fluid performance. Moreover, the maturation of the oil production industry from unconventional wells will be discussed after which the limitations and degradation of the traditional drilling fluid will be cleared up. Finally, this essay will discuss the great potential of nanotechnology in solving drilling problems in addition to the technical and the economic benefits of using nanomaterials in drilling fluids before offering a brief conclusion.

Published in	American Journal of Nano Research and Applications (Volume 3, Issue 3)
DOI	10.11648/j.nano.20150303.12
Page(s)	41-45
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Drilling Fluids, Reservoir, Nanotechnology, HTHP Conditions, Nanoparticles, Nano-Fluid

References

[1]	Abdo, J. and Danish, M. (2010). Nanoparticles: Promising solution to overcome stern drilling problems. In Nanotech Conference and Exhibition, Anaheim, California.
[2]	Abdo, J. and Haneef, M. (2012). Nano-Enhanced Drilling Fluids: Pioneering Approach to Overcome Uncompromising Drilling Problems. J. Energy Resour. Technol., 134(1), p.014501.
[3]	Abdo, J. and Haneef, M. D. (2013). Clay nanoparticles modified drilling fluids for drilling of deep hydrocarbon wells. Applied Clay Science, 86, pp. 76-82.
[4]	Amanullah, M., and Al-Tahini, A. M. (2009). Nano-technology-its significance in smart fluid development for oil and gas field application. In SPE Saudia Arabia Section Technical Symposium. Society of Petroleum Engineers.
[5]	Apaleke, A. S., Al-Majed, A. A., and Hossain, M. E. (2012). Drilling Fluid: State of The Art and Future Trend. In North Africa Technical Conference and Exhibition. Society of Petroleum Engineers.
[6]	ASME Shale Shaker Committee. (2011). Drilling fluids processing handbook. Elsevier.
[7]	Awele, J. (2014). Investigation of additives on drilling mud performance with “tønder geothermal drilling” as a case study. Master. Aalborg University Esbjerg.
[8]	Bicerano, J. (2008). Drilling fluid, drill-in fluid, competition fluid, and work over fluid additive compositions containing thermoset nancomposite particles; and applications for fluid loss control and wellbore strengthening. U.S. Patent Application 12/178,785.
[9]	Caenn, R., Darley, H. C., and Gray, G. R. (2011). Composition and properties of drilling and completion fluids. Gulf Professional Publishing.
[10]	Chapman, M.T., 1890. U.S. Patent Records, U.S. Patent No. 443,069 (Dec. 16).
[11]	Darley, H. C., and Gray, G. R. (1988). Composition and properties of drilling and completion fluids. Gulf Professional Publishing.
[12]	Fauvelle, M. (1846). On a new method of boring for artesian springs. Journal of the Franklin Institute, 42(6), pp. 369-372.
[13]	Fink, J. (2011). Petroleum engineer's guide to oil field chemicals and fluids. Gulf Professional Publishing.
[14]	Gupta, D. V. S., and Pierce, R. G. (1998). A New Concept for On-the-Fly Hydration of Water-based Fracturing Fluids. In SPE Gas Technology Symposium. Society of Petroleum Engineers.
[15]	Harth, P.E. (1935). Application of mud-laden fluids to oil or gas wells. U.S. Patent No. 1,991,637 (Feb.19).
[16]	Health and Safety Laboratory (2000) Drilling Fluids Composition and use with the UK Offshore Drilling Industry, United Kingdom: Health and Safety Executive.
[17]	Jimenez, M. A., Genolet, L. C., Chavez, J. C., and Espin, D. (2003). U.S. Patent No. 6,579,832. Washington, DC: U.S. Patent and Trademark Office.
[18]	Mellot, J. (2008). Technical Improvements in Wells Drilled with a Pneumatic Fluid. In SPE paper 99162, presented at the SPE/IDAC drilling Conference, Miami, Florida, USA, February (pp. 21-23).
[19]	Mostafavi, V. Ferdous, M.Z. Hareland, G.Husein, M. Design and Application of Novel Nano Drilling Fluids to Mitigate Circulation Loss Problems During Oil Well Drilling Operations, J clean Technology, ISBN: 978-1-4398-8189-7, 2011.
[20]	Nabhani, N., & Emami, M. THE POTENIAL IMPACT OF NANOMATERIALS IN OIL DRILLING INDUSTRY.
[21]	Nasser, J., Jesil, A., Mohiuddin, T., Al Ruqeshi, M., Devi, G., & Mohataram, S. (2013). Experimental Investigation of Drilling Fluid Performance as Nanoparticles. World Journal of Nano Science and Engineering, 2013.
[22]	Oakley, D. J., James, S. G., and Cliffe, S. (1991). The Influence of Oil-Based Drilling Fluid Chemistry and Physical Properties on Oil Retained on Cuttings.Offshore Europe.
[23]	Oakley, D. J., Morton, K., Eunson, A., Gilmour, A., Pritchard, D., and Valentine, A. (2000). Innovative Drilling Fluid Design and Rigorous Pre-Well Planning Enable Success in an Extreme HTHP Well. In IADC/SPE Asia Pacific Drilling Technology. Society of Petroleum Engineers.
[24]	Palaman, A, N and Bander, D.A.A. (2008). Using Nanoparlides to Decrease Differential Pipe Stricking and Its Feasibility in Iranian Oil Fields, J.Oil and Gas Business.
[25]	Ragab A. M. Salem, and Noah A. (2014). Reduction of Formation Damage and Fluid Loss using Nano-sized Silica Drilling Fluids. Petroleum Technology Development Journal (2), PP. 75-88
[26]	Sayyadnejad, M. A., Ghaffarian, H. R., and Saeidi, M. (2008). Removal of hydrogen sulfide by zinc oxide nanoparticles in drilling fluid. International Journal of Environmental Science & Technology, 5(4), pp. 565-569.
[27]	Shah, S. N., Shanker, N. H. and Ogugbue, C. C. (2010). Future challenges of drilling fluids and their rheological measurements. In AADE fluids conference and exhibition, Houston, Texas.
[28]	Singh, S., Ahmed, R. and Growcock, F. (2010). Vital Role of Nanopolymers in Drilling and Stimulations Fluid Applications. In Paper SPE 130413 presented at the SPE Annual Technical Conference and Exhibition, Florence, Italy, pp. 19-22
[29]	Skalle, P. (2010). Drilling fluid engineering. Book boon.
[30]	Suri, A. and Sharma, M. M. (2004). Strategies for sizing particles in drilling and completion fluid. SPE Journal, 9(01), pp.13-23.
[31]	Van Dyke, K. (1998). Drilling Fluids, Mud Pumps, and Conditioning Equipment. University of Texas at Austin Petroleum.
[32]	Wasan, D. T., and Nikolov, A. D. (2003). Spreading of nanofluids on solids. Nature, 423(6936), pp. 156-159.
[33]	Wawrzos, Frank A., and Donald J. Weintritt. (2007). Drilling fluid lubricant and method of use." U.S. Patent Application 11/957,634.

Cite This Article

Plain Text BibTeX RIS

APA Style

Mortatha Saadoon Al-Yasiri, Waleed Tareq Al-Sallami. (2015). How the Drilling Fluids Can be Made More Efficient by Using Nanomaterials. American Journal of Nano Research and Applications, 3(3), 41-45. https://doi.org/10.11648/j.nano.20150303.12

Copy | Download

ACS Style

Mortatha Saadoon Al-Yasiri; Waleed Tareq Al-Sallami. How the Drilling Fluids Can be Made More Efficient by Using Nanomaterials. Am. J. Nano Res. Appl. 2015, 3(3), 41-45. doi: 10.11648/j.nano.20150303.12

Copy | Download

AMA Style

Mortatha Saadoon Al-Yasiri, Waleed Tareq Al-Sallami. How the Drilling Fluids Can be Made More Efficient by Using Nanomaterials. Am J Nano Res Appl. 2015;3(3):41-45. doi: 10.11648/j.nano.20150303.12

Copy | Download

@article{10.11648/j.nano.20150303.12,
  author = {Mortatha Saadoon Al-Yasiri and Waleed Tareq Al-Sallami},
  title = {How the Drilling Fluids Can be Made More Efficient by Using Nanomaterials},
  journal = {American Journal of Nano Research and Applications},
  volume = {3},
  number = {3},
  pages = {41-45},
  doi = {10.11648/j.nano.20150303.12},
  url = {https://doi.org/10.11648/j.nano.20150303.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.nano.20150303.12},
  abstract = {Drilling fluids serve many objectives in a drilling process, including the elimination of cuttings, lubricating and cooling the drill bits, supporting the stability of the hole and preventing the inflow-outflow of fluids between borehole and the formation. However, with increasing production from non-conventional reservoirs, the stability and effectiveness of traditional drilling fluids under high temperature and high pressure (HTHP) environment have become big concerns. Both water and oil based drilling fluids are likely to experience a number of deteriorations such as gelation, degradation of weighting materials and breakdown of polymeric additives under HTHP conditions. Recently, nanotechnology has shown a lot of promise in the oil and gas sectors, including nanoparticle-based drilling fluids. This paper aims to explore and assess the influence of various nanoparticles on the performance of drilling fluids to make the drilling operation smooth, cost effective and efficient. In order to achieve this aim, the article will begin by explaining the important role that drilling fluid plays during the drilling process with a historical review of drilling fluid industry development. Then, definitions, uses and types of drilling fluid will be demonstrated as well as, the additives that are appended in order to enhance drilling fluid performance. Moreover, the maturation of the oil production industry from unconventional wells will be discussed after which the limitations and degradation of the traditional drilling fluid will be cleared up. Finally, this essay will discuss the great potential of nanotechnology in solving drilling problems in addition to the technical and the economic benefits of using nanomaterials in drilling fluids before offering a brief conclusion.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - How the Drilling Fluids Can be Made More Efficient by Using Nanomaterials
AU  - Mortatha Saadoon Al-Yasiri
AU  - Waleed Tareq Al-Sallami
Y1  - 2015/04/14
PY  - 2015
N1  - https://doi.org/10.11648/j.nano.20150303.12
DO  - 10.11648/j.nano.20150303.12
T2  - American Journal of Nano Research and Applications
JF  - American Journal of Nano Research and Applications
JO  - American Journal of Nano Research and Applications
SP  - 41
EP  - 45
PB  - Science Publishing Group
SN  - 2575-3738
UR  - https://doi.org/10.11648/j.nano.20150303.12
AB  - Drilling fluids serve many objectives in a drilling process, including the elimination of cuttings, lubricating and cooling the drill bits, supporting the stability of the hole and preventing the inflow-outflow of fluids between borehole and the formation. However, with increasing production from non-conventional reservoirs, the stability and effectiveness of traditional drilling fluids under high temperature and high pressure (HTHP) environment have become big concerns. Both water and oil based drilling fluids are likely to experience a number of deteriorations such as gelation, degradation of weighting materials and breakdown of polymeric additives under HTHP conditions. Recently, nanotechnology has shown a lot of promise in the oil and gas sectors, including nanoparticle-based drilling fluids. This paper aims to explore and assess the influence of various nanoparticles on the performance of drilling fluids to make the drilling operation smooth, cost effective and efficient. In order to achieve this aim, the article will begin by explaining the important role that drilling fluid plays during the drilling process with a historical review of drilling fluid industry development. Then, definitions, uses and types of drilling fluid will be demonstrated as well as, the additives that are appended in order to enhance drilling fluid performance. Moreover, the maturation of the oil production industry from unconventional wells will be discussed after which the limitations and degradation of the traditional drilling fluid will be cleared up. Finally, this essay will discuss the great potential of nanotechnology in solving drilling problems in addition to the technical and the economic benefits of using nanomaterials in drilling fluids before offering a brief conclusion.
VL  - 3
IS  - 3
ER  -

Copy | Download

Author Information

Mortatha Saadoon Al-Yasiri

Chemical Engineering Department, College of Engineering, University of Baghdad, Baghdad, Iraq
Waleed Tareq Al-Sallami

Department of Air conditioning& Refrigeration, Technical College, Mosul, Iraq

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Mortatha Saadoon Al-Yasiri, Waleed Tareq Al-Sallami. (2015). How the Drilling Fluids Can be Made More Efficient by Using Nanomaterials. American Journal of Nano Research and Applications, 3(3), 41-45. https://doi.org/10.11648/j.nano.20150303.12

Copy | Download

ACS Style

Mortatha Saadoon Al-Yasiri; Waleed Tareq Al-Sallami. How the Drilling Fluids Can be Made More Efficient by Using Nanomaterials. Am. J. Nano Res. Appl. 2015, 3(3), 41-45. doi: 10.11648/j.nano.20150303.12

Copy | Download

AMA Style

Mortatha Saadoon Al-Yasiri, Waleed Tareq Al-Sallami. How the Drilling Fluids Can be Made More Efficient by Using Nanomaterials. Am J Nano Res Appl. 2015;3(3):41-45. doi: 10.11648/j.nano.20150303.12

Copy | Download

@article{10.11648/j.nano.20150303.12,
  author = {Mortatha Saadoon Al-Yasiri and Waleed Tareq Al-Sallami},
  title = {How the Drilling Fluids Can be Made More Efficient by Using Nanomaterials},
  journal = {American Journal of Nano Research and Applications},
  volume = {3},
  number = {3},
  pages = {41-45},
  doi = {10.11648/j.nano.20150303.12},
  url = {https://doi.org/10.11648/j.nano.20150303.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.nano.20150303.12},
  abstract = {Drilling fluids serve many objectives in a drilling process, including the elimination of cuttings, lubricating and cooling the drill bits, supporting the stability of the hole and preventing the inflow-outflow of fluids between borehole and the formation. However, with increasing production from non-conventional reservoirs, the stability and effectiveness of traditional drilling fluids under high temperature and high pressure (HTHP) environment have become big concerns. Both water and oil based drilling fluids are likely to experience a number of deteriorations such as gelation, degradation of weighting materials and breakdown of polymeric additives under HTHP conditions. Recently, nanotechnology has shown a lot of promise in the oil and gas sectors, including nanoparticle-based drilling fluids. This paper aims to explore and assess the influence of various nanoparticles on the performance of drilling fluids to make the drilling operation smooth, cost effective and efficient. In order to achieve this aim, the article will begin by explaining the important role that drilling fluid plays during the drilling process with a historical review of drilling fluid industry development. Then, definitions, uses and types of drilling fluid will be demonstrated as well as, the additives that are appended in order to enhance drilling fluid performance. Moreover, the maturation of the oil production industry from unconventional wells will be discussed after which the limitations and degradation of the traditional drilling fluid will be cleared up. Finally, this essay will discuss the great potential of nanotechnology in solving drilling problems in addition to the technical and the economic benefits of using nanomaterials in drilling fluids before offering a brief conclusion.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - How the Drilling Fluids Can be Made More Efficient by Using Nanomaterials
AU  - Mortatha Saadoon Al-Yasiri
AU  - Waleed Tareq Al-Sallami
Y1  - 2015/04/14
PY  - 2015
N1  - https://doi.org/10.11648/j.nano.20150303.12
DO  - 10.11648/j.nano.20150303.12
T2  - American Journal of Nano Research and Applications
JF  - American Journal of Nano Research and Applications
JO  - American Journal of Nano Research and Applications
SP  - 41
EP  - 45
PB  - Science Publishing Group
SN  - 2575-3738
UR  - https://doi.org/10.11648/j.nano.20150303.12
AB  - Drilling fluids serve many objectives in a drilling process, including the elimination of cuttings, lubricating and cooling the drill bits, supporting the stability of the hole and preventing the inflow-outflow of fluids between borehole and the formation. However, with increasing production from non-conventional reservoirs, the stability and effectiveness of traditional drilling fluids under high temperature and high pressure (HTHP) environment have become big concerns. Both water and oil based drilling fluids are likely to experience a number of deteriorations such as gelation, degradation of weighting materials and breakdown of polymeric additives under HTHP conditions. Recently, nanotechnology has shown a lot of promise in the oil and gas sectors, including nanoparticle-based drilling fluids. This paper aims to explore and assess the influence of various nanoparticles on the performance of drilling fluids to make the drilling operation smooth, cost effective and efficient. In order to achieve this aim, the article will begin by explaining the important role that drilling fluid plays during the drilling process with a historical review of drilling fluid industry development. Then, definitions, uses and types of drilling fluid will be demonstrated as well as, the additives that are appended in order to enhance drilling fluid performance. Moreover, the maturation of the oil production industry from unconventional wells will be discussed after which the limitations and degradation of the traditional drilling fluid will be cleared up. Finally, this essay will discuss the great potential of nanotechnology in solving drilling problems in addition to the technical and the economic benefits of using nanomaterials in drilling fluids before offering a brief conclusion.
VL  - 3
IS  - 3
ER  -

Copy | Download