| Peer-Reviewed

Synthesis and Characterization of Starch Vernolates in Organic Solvents

Received: 13 November 2016    Accepted: 25 November 2016    Published: 17 December 2016
Views:       Downloads:
Abstract

In this study the synthesis of epoxy fatty acid esters of starch (starch vernolates) by the reaction of cassava starch with vernonia oil methyl ester (epoxy ester) using basic catalyst K2CO3 and organic solvent, DMSO as a reaction medium is presented. Under current reaction conditions, a high degree of substitution of 1.24 was achieved, at a reaction temperature of 110°C and 12 hours of reaction time. The new starch vernolates were characterized by Scanning electron microscopy (SEM) and X-ray diffraction (XRD) indicated that the new product is an amorphous material with a continuous and shapeless morphology. The melting point measured by differential scanning calorimetry (DSC) was 118°C. The new synthetic method makes the synthesis of starch vernolates less time consuming and more inexpensive. The differences in melting point and degree of substitution with previously synthesized starch vernolates using enzymatic and chemical catalysis suggest a difference in reaction selectivity via this new reaction path.

Published in American Journal of Applied Chemistry (Volume 4, Issue 6)
DOI 10.11648/j.ajac.20160406.11
Page(s) 212-220
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Vernonia Oil Methyl Ester, Cassava Starch, Starch Vernolates

References
[1] Desalegn, T.; Villar-Garcia, I. J.; Titman, J.; Licence, P.; Diaz, I.; Chebude, Y., Enzymatic synthesis of epoxy fatty acid starch ester in ionic liquid–organic solvent mixture from vernonia oil. Starch/Stärke 2014, 66 (3-4), 385-392.
[2] Meier, M. A. R., Metzger, J. O., Schubert, U. S., Plant oil renewable resources as green alternatives in polymer science. Chem. Soc. Rev. 2007, 36, 1788–1802.
[3] Perdue, R. E., Carlson, K. D., Gilbert, M. G., Vernonia galamensis, potential new crop source of epoxy fatty acid. Econ. Bot. 1986, 40, 54–68.
[4] Grinberg, S., Kolot, V., Mills, D., New chemical derivatives based on Vernonia galamensis oil. Indus. Crop. Prod. 1994, 3, 113–119.
[5] Carlson, K. D., Schneider, W. J., Chang, S. P., Princen, L. H., in: Pryde, E. H., Princen, L. H., Mukherjee, F. (Eds.), New Sources of Fats and Oils, AOCS Monograph 9, American Oil Chemists Society, Champaign, IL, USA 1981, pp. 297–318.
[6] Ayorinde, F. O., Clifton, J., Afolabi, O. A., Shepard, R. L., Rapid transesterification and mass spectrometric approach to seed oil analysis. J. Am. Oil Chem. Soc. 1988, 65, 942–947.
[7] Trumbo, D. L., Rudelich, J. C., Mote, B. E., in: Janick, J. (Ed.), Perspectives on New Crops and New Uses, ASHS Press, Alexandria, VA 1999, pp. 266–271.
[8] Thompson, A. E., Dierig, D. A., Kleiman, R., Characterization of Vernonia galamensis germplasm for seed oil content, fatty acid composition, seed weight, and chromosome number. Indus. Crops Prod. 1994, 2, 299–305.
[9] Ayorinde, F. O., Butler, B. D., Clayton, M. T., Vernonia galamensis: A rich source of epoxy acid. J. Am. Oil Chem. Soc. 1990, 67, 844–845.
[10] Tharanathan, R. N., Starch - Value Addition by Modification. Critical Reviews in Food Science and Nutrition, 2005, 45, 371–384.
[11] BeMiller, J. N., Starch modification: challenges and prospects. Starch-Starke 1997, 49: 127-131.
[12] Dzulkefly, K, Koon, S. Y., Kassim, A., Sharif, A., Abdullah, A. H, Chemical Modification of Sago Starch by Solventless Esterification with fatty acid chlorides. The Malaysian Journal of Analytical Sciences, 2007, 11 (2), 395-399.
[13] Mullen, J. W. Pacsu, E., Starch studies: possible industrial utilization of starch esters. Ind. Eng. Chem. 1943, 35, 381–384.
[14] Sagar, A. D., and Merrill, E. W., Properties of fatty-acid esters of starch. J. Appl. Polym. Sci., 1995, 58, 1647.
[15] Junistia, L., Sugih, A. K., Manurung, R., Picchioni, F., Janssen, L., & Heeres, H. J., Synthesis of higher fatty acid starch esters using vinyl laurate and stearate as reactants. Starch/Stärke 2008, 60, 667–675.
[16] Aburto, J., Alric, I., Borredon, E. Preparation of long-chain esters of starch using fatty acid chlorides in the absence of an organic solvent. Starch/Stärke 1999, 51, 132–135.
[17] Aburto, J., Alric, I., & Borredon, E. Organic solvent-free transesterification of various starches with lauric acid methyl ester and triacyl glycerides. Starch/Stärke, 2005. 57, 145–152.
[18] Rajan, A., Prasad, V. S., Abraham, T. E., Enzymatic esterification of starch using recovered coconut oil. International Journal of Biological Macromolecules 2006,39, 265–272.
[19] Elhilo, E. B., Melissa, A. A., Ayorinde, F. O., Synthesis of cis-12,13-epoxy-cis-9-octadecenol and 12(13)-hydroxy-cis-9-octadecenol from Vernonia oil using lithium aluminum hydride. J. Am. Oil Chem. Soc. 2000, 77, 873–878.
[20] Mathew, S., Abraham, T. E., Physico-chemical characterization of starch ferulates of different degrees of substitution. Food Chemistry 2007, 105, 579–589.
[21] Garg, S., Jana, A. K., Characterization ands evaluation of acylated starch with different acyl groups and degrees of substitution. Carbohydrate Polymers 2011, 83, 1623–1630.
[22] Goheen, S. M., Wool, R. P., Degradation of polyethylene starch blends in soil. J. Appl. Polym. Sci.1991, 42, 2691-2701.
[23] Kapusniak, J., Siemion, P., Thermal reactions of starch with long-chain unsaturated fatty acids part 2. Linoleic acid. Journal of Food Engineering 2007, 78, 323–332.
[24] Aburto J, Alric I, Thiebaud S. Synthesis, characterization, and biodegradability of fatty-acid esters of amylose and starch. J Appl Polym Sci, 1999, 74: 1440―1451.
[25] Zhang, L., Xie, W., Zhao, X., Liu, Y., Gao, W., Study on the morphology, crystalline structure and thermal properties of yellow ginger starch acetates with different degrees of substitution. Thermochimica Acta 2009, 495, 57–62.
[26] Fang, J. M., Fowler, P. A., Tomkinso, J., & Hill, C. A. S. The preparation and characterization of a series of chemically modified potato starches. Carbohydrate Polymers 2002, 47, 245–252.
[27] Horchani, H., Chaabouni, M., Gargouri, Y., Sayari, A., Solvent free lipase-catalyzed synthesis of long-chain starch esters using microwave heating: Optimization by response surface methodology. Carbohydrate Polymers 2010, 79, 466–474.
[28] Jyothi, A. N., Sajeev, M. S., Parvathy, P. C., Sreekumar, J., Optimization of synthesis and characterization of cassava starch-graft-poly(acrylonitrile) using response surface methodology. Journal of Applied Polymer Science, 2011, 122, 1546–1555.
[29] Rodriguez, A., Sain, M., Jeng, R., Thermal characterization of starch-based polymers produced by Ophiostoma spp. J Therm Anal Calorim 2009, 98, 317–323.
[30] Sagar A. D, Merrill E. W., Properties of fatty-acid ester of starch. J Appl Polym Sci, 1995, 58, 1647―1656.
[31] Shogren, R. L., Preparation, thermal properties, and extrusion of high-amylose starch acetates. Carbohydr Polym, 1996, 29, 57―62.
[32] Aburto, J., Alric, I., Thiebaud, S., Synthesis, characterization, and biodegradability of fatty-acid esters of amylose and starch. J. Appl. Polym. Sci., 1999, 74, 1440―1451.
[33] Xie, W., Zhang, Y., Liu, Y., Homogenous carboxymethylation of starch using 1-butyl-3-methylimdazolium chloride ionic liquid medium as solvent. Carbohydrate Polymers 2011,85, 792–797.
[34] Muljana, H., Picchioni, F., Heeres, H. J., Janssen P. B. M., Process-product studies on starch acetylation reactions in pressurized carbon dioxide. Starch/Stärke 2010, 62, 566–576.
[35] Garcia, V., Colonna, P., Bouchet, B., and Gallant, D. J., Structural changes of cassava starch granules after heating at intermediate water contents. Starch/Stärke 1997, 49 171-179.
[36] Paulos, G., Endale, A., Bultosa, G., and Gebre-Mariam, T., Isolation and Physicochemical Characterization of Cassava Starches Obtained from Different Regions of Ethiopia. Ethiop Pharm J 2009, 27, 42-54.
[37] Xie, W., Shao, L., Liu, Y., Synthesis of starch esters in ionic liquids. J. Appl. Polym. Sci. 2010, 116, 218–224.
[38] Hoover, R., Composition, molecular structure, and physicochemical properties of tuber and root starches: A review. Carbohydrate Polymers, 2001, 45: 253-267.
[39] Moorthy, S. N., Physicochemical and Functional Properties of Tropical tuber starches: A Review. Starch/Stärke 2002, 54, 559-592.
[40] Shujun, W., Jinglin, Y., Wenyuan, G., Use of X-Ray Diffractometry (XRD) in the identifiocation of Fritillaria According to Geographical origin. Am. J. Biochem. & Biotechnol. 2005, 1 (4), 199-203.
[41] Defloor, I., Dehing, I., Delcour, J. A., Physico-chemical properties of cassava starch. Starch/Stärke 1998, 50(2–3), 58–64.
[42] Kuo, W. Y., Lai, H. M., Changes of property and morphology of cationic corn starches. Carbohydrate Polymers, 2007, 69(3), 544–553.
[43] Xu, Y., Miladinov, V., and Hanna, M. A. Synthesis and Characterization of starch acetates with high substitution. Cereal Chem. 2004, 81, 735–740.
[44] Xu, W., Wenyuan, G., Liming, Z., Peigen, X., Liping, Y., Yi, L., Kefeng, L., Weiguang, X., Study on the morphology, crystalline structure and thermal properties of yam starch acetates with different degrees of substitution. Sci China Ser B-Chem. 2008, 51, 859-865.
[45] Zhang, L., Xie, W., Zhao, X., Liu, Y., Gao, W., Study on the morphology, crystalline structure and thermal properties of yellow ginger starch acetates with different degrees of substitution. Thermochimica Acta 2009, 495 57–62.
[46] Carvalho, J., Goncalves, C., Gil, A. M., Gama, F. M., Production and characterization of a new dextrin based hydrogel. European Polymer Journal 2007, 43, 3050–3059.
[47] Killinger, W. E., Murray, D., Hatfield, G. R., Hassler, T., Determination of the Degree of Cationicity in Cationic Starches by Solid-state 13C NMR Spectroscopy. Starch/Stärke 1995, 47, 311-314.
[48] Li, J., Zhang, L., Peng, F., Bian, J., Yuan, T., Xu, F., and Sun R., Microwave-Assisted Solvent-Free Acetylation of Cellulose with Acetic Anhydride in the Presence of Iodine as a Catalyst. Molecules 2009, 14, 3551-3566.
[49] Luo, Z., and Zhou, Z., Homogenous synthesis and characterization of starch acetates in ionic liquid without catalysis. Starch/Stärke 2012, 64, 37–44.
[50] Desalegn, T.; Villar-Garcia, I. J.; Titman, J.; Licence, P.; Diaz, I.; Chebude, Y., Synthesis of Starch Vernolate in 1-Butyl-3-methylimidazolium Chloride Ionic Liquid. Starch/Stärke 2015, 67, 200–203.
Cite This Article
  • APA Style

    Tegene Desalegn Zeleke, Teshome Abdo Segne, Yonas Chebude. (2016). Synthesis and Characterization of Starch Vernolates in Organic Solvents. American Journal of Applied Chemistry, 4(6), 212-220. https://doi.org/10.11648/j.ajac.20160406.11

    Copy | Download

    ACS Style

    Tegene Desalegn Zeleke; Teshome Abdo Segne; Yonas Chebude. Synthesis and Characterization of Starch Vernolates in Organic Solvents. Am. J. Appl. Chem. 2016, 4(6), 212-220. doi: 10.11648/j.ajac.20160406.11

    Copy | Download

    AMA Style

    Tegene Desalegn Zeleke, Teshome Abdo Segne, Yonas Chebude. Synthesis and Characterization of Starch Vernolates in Organic Solvents. Am J Appl Chem. 2016;4(6):212-220. doi: 10.11648/j.ajac.20160406.11

    Copy | Download

  • @article{10.11648/j.ajac.20160406.11,
      author = {Tegene Desalegn Zeleke and Teshome Abdo Segne and Yonas Chebude},
      title = {Synthesis and Characterization of Starch Vernolates in Organic Solvents},
      journal = {American Journal of Applied Chemistry},
      volume = {4},
      number = {6},
      pages = {212-220},
      doi = {10.11648/j.ajac.20160406.11},
      url = {https://doi.org/10.11648/j.ajac.20160406.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajac.20160406.11},
      abstract = {In this study the synthesis of epoxy fatty acid esters of starch (starch vernolates) by the reaction of cassava starch with vernonia oil methyl ester (epoxy ester) using basic catalyst K2CO3 and organic solvent, DMSO as a reaction medium is presented. Under current reaction conditions, a high degree of substitution of 1.24 was achieved, at a reaction temperature of 110°C and 12 hours of reaction time. The new starch vernolates were characterized by Scanning electron microscopy (SEM) and X-ray diffraction (XRD) indicated that the new product is an amorphous material with a continuous and shapeless morphology. The melting point measured by differential scanning calorimetry (DSC) was 118°C. The new synthetic method makes the synthesis of starch vernolates less time consuming and more inexpensive. The differences in melting point and degree of substitution with previously synthesized starch vernolates using enzymatic and chemical catalysis suggest a difference in reaction selectivity via this new reaction path.},
     year = {2016}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Synthesis and Characterization of Starch Vernolates in Organic Solvents
    AU  - Tegene Desalegn Zeleke
    AU  - Teshome Abdo Segne
    AU  - Yonas Chebude
    Y1  - 2016/12/17
    PY  - 2016
    N1  - https://doi.org/10.11648/j.ajac.20160406.11
    DO  - 10.11648/j.ajac.20160406.11
    T2  - American Journal of Applied Chemistry
    JF  - American Journal of Applied Chemistry
    JO  - American Journal of Applied Chemistry
    SP  - 212
    EP  - 220
    PB  - Science Publishing Group
    SN  - 2330-8745
    UR  - https://doi.org/10.11648/j.ajac.20160406.11
    AB  - In this study the synthesis of epoxy fatty acid esters of starch (starch vernolates) by the reaction of cassava starch with vernonia oil methyl ester (epoxy ester) using basic catalyst K2CO3 and organic solvent, DMSO as a reaction medium is presented. Under current reaction conditions, a high degree of substitution of 1.24 was achieved, at a reaction temperature of 110°C and 12 hours of reaction time. The new starch vernolates were characterized by Scanning electron microscopy (SEM) and X-ray diffraction (XRD) indicated that the new product is an amorphous material with a continuous and shapeless morphology. The melting point measured by differential scanning calorimetry (DSC) was 118°C. The new synthetic method makes the synthesis of starch vernolates less time consuming and more inexpensive. The differences in melting point and degree of substitution with previously synthesized starch vernolates using enzymatic and chemical catalysis suggest a difference in reaction selectivity via this new reaction path.
    VL  - 4
    IS  - 6
    ER  - 

    Copy | Download

Author Information
  • Department of Chemistry, Adama Science and Technology University, Adama, Ethiopia

  • Department of Chemistry, Adama Science and Technology University, Adama, Ethiopia

  • Department of Chemistry, Addis Ababa University, Addis Ababa, Ethiopia

  • Sections