Clay materials have been used for centuries by local populations in ceramic pottery. This research aimed to examine natural clay as raw material for the manufacturing of ceramic pot filters. Thus, three clay samples were collected from a quarry in “Sè”, located in the southwestern part of the Benin Republic. All the samples were characterized using granulometric analysis, X-ray Powder Diffraction (XRD), loss on ignition (LOI), cation exchange capacity (CEC), and measurement of Atterberg’s limits. N2 adsorption technique were used to define specific surface areas and the major elements composing the clays were determined. The chemical and mineralogical analysis indicates that all of the samples contain various amounts of quartz and kaolinite, followed by muscovite and vermiculite. They also indicate that the clay materials are silico-aluminous clays. CEC and N2 adsorption showed as expected a low CEC and specific surface because of the presence of quartz and kaolinite quartz. The analyzed samples reveal that clays are very plastic, with an organic matter content ranging from 7.8% to 9.8% (loss on ignition). TGA analysis showed that the suitable sintering temperatures is from 700°C and above. Based on their mineral composition and physical properties, the clays are suitable as raw material for ceramic industry, especially for ceramic water filters.
| Published in | American Journal of Applied Chemistry (Volume 5, Issue 6) |
| DOI | 10.11648/j.ajac.20170506.11 |
| Page(s) | 90-95 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Clay, Ceramic, Potential Utilization, Characterization, Sè
| [1] | O. P. Aghamelu, and C. O. Okogbue, “Characterization of some clays from Nigeria for their use in drilling mud,” Appl. Clay Sci., vol. 116-117, pp. 158-166, 2015. |
| [2] | P. Sooksaen, and S. Karawatthanaworrakul, “The properties of Southern Thailand clay-based porous ceramics fabricated from different pore size templates,” Appl. Clay Sci., vol. 104, pp. 295-302, 2015. |
| [3] | J. Jalali, M. Balghouthi, and H. Ezzaouia, “Characterization of porous clay ceramics used to remove salt from the saline soils,” Appl. Clay Sci., 2016, in press. |
| [4] | Z. Zhu, Z. Wei, W. Sun, J. Hou, B. He, and Y. Dong, “Cost-effective utilization of mineral-based raw materials for preparation of porous mullite ceramic membranes via in-situ method,” Appl. Clay Sci., vol. 120, pp. 135-141, 2016. |
| [5] | S. Ummartyotin, N. Bunnak, and H. Manuspiya, “A comprehensive review on modified clay based composite for energy based materials,” Renew. Sustain. Energy Rev., vol 61, pp. 466-472, 2016. |
| [6] | J. Zhou, X. Zhang, Y. Wang, A. Larbot, and X. Hu, Elaboration and characterization of turbular macroporous ceramic support for membranes from kaolin and dolomite. J. Porous Mater., vol 17, pp. 1-9, 2010. |
| [7] | A. Gharzouni, B. Samet, S. Baklouti, E. Joussein, and S. Rossignol, “Addition of low reactive clay into metakaolin-based geopolymer formulation: synthesis, existence domains and properties,” Powder Technol., vol 288, pp. 212-220, 2016. |
| [8] | H. van der Laan, D. van Halem, P. W. M. H. Smeets, A. I. A. Soppe, J. Kroesbergen, G. Wubbels, J. Nederstigt, I. Gensburger, and S. G. J. Heijman, “Bacteria and virus removal effectiveness of ceramic pot filters with different silver applications in a long term experiment,” Water Res., vol 51, pp. 47-54, 2014. |
| [9] | J. Mellor, L. Adebe, B. Ehdaie, R. Dillingham, and J. Smith, “Modeling the sustainability of a ceramic water filter intervention,” Water Res., vol 49, pp. 286-299, 2014. |
| [10] | A. I. A. Soppe, S. G. J. Heijman, I. Genburger, A. Shantz, D. van Halem, J. Kroesbergen, G. H. Wubbels, and P. W. M. H. Smeets, “Critical parameters in the production of ceramic pot filters for household water treatment in developing countries,” J. Water Health., vol 13, pp. 587-599, 2015. |
| [11] | A. Pérrez-Vidal, J. Diaz-Gomez, J. Castellanos-Rozo, and O. L. Usaquen-Perilla, “Long-term evaluation of the performance of four point-of-use water filters,” Water Res., vol 98, pp. 176-182, 2016. |
| [12] | P. Faure, and B. Volkoff, “Some factors affecting regional differentiation of the soils in the Republic of Benin (West Africa),” Catena, vol 32, pp. 281-306, 1998. |
| [13] | P. T. Hang, and G; W. Brindley, “Methylene blue absorption by clay minerals. Determination of surface areas and cation exchange capacities,” Clays Clay Miner, vol 18, pp. 203-212, 1970. |
| [14] | K. S. W. Sing, D. H. Everett, R. A. Pierotti, J. Rouquérol, and T. Siemieniewska, “Reporting physiosorption data for gas/solid systems with special reference to the determination of surface area and porosity,” Int. unon pure Appl. Chem., vol 57, pp. 603-619, 1985. |
| [15] | M. Abubakar, M. Nasir, M. Aziz M. B. Uday, N. Ahmad and D. Mullite, “Preparation and characterization of a Nigerian mesoporous clay-based membrane for uranium removal from underground water,” Ceram. Int., vol 42, pp. 8212-8220, 2016. |
| [16] | S. Mahmoudi, A. Bennour, A. Meguebli, E. Srasra and F. Zargouni, “Characterization and traditional ceramic application of clays from Douiret region in South Tunisia,” Appl. Clay Sci., vol 127-128, pp. 78-87. |
| [17] | A. Sdiri, I. Ben, L. Ben, S. Bouaziz, and J. Duplay, “Geological and technological characterization of the Late Jurrassic-Early Creataceous clay deposits (Jebel Ammar, northeastern Tunisia) for ceramic industry,” J. African Earth Sci., vol 129, pp. 282-290, 2017. |
| [18] | S. Stanchi, M. d’Amico, E. Zanini, and M. Freppaz, “Liquid and plastic limits of mountain soils as a function of the soil and horizon type,” Catena, vol 135, pp. 114-121, 2015. |
| [19] | R. A. Schoonheydt, and C. T. Johnston, “Surface and interface chemistry of clay minerals,” Dev. Clay Sci, vol 1, pp. 87-113, 2006. |
| [20] | I. I. Topeshta, T. A. Sokolova, E. Bonifacio, and G. Falcone, “Pedogenic chlorites in podzolic soils with different intensities of hydromorphism: origin, properties, and conditions of their formation,” Eurasian Soil Sci, vol 43, pp. 777-787, 2010. |
| [21] | B. Dolinar, “A simplified method for determining the external specific surface area of non-swelling fine-grained soils,” Appl. Clay Sci, vol 64, pp. 34-37, 2012. |
APA Style
Akuemaho Virgile Onésime Akowanou, Martin Pépin Aina, Sènandémi Edwige Reine Mahunon, Benjamin Kouassi Yao. (2017). Characterization of Clays from the “Sè” Region in the South of Benin Used to Make Ceramic Water Filters. American Journal of Applied Chemistry, 5(6), 90-95. https://doi.org/10.11648/j.ajac.20170506.11
ACS Style
Akuemaho Virgile Onésime Akowanou; Martin Pépin Aina; Sènandémi Edwige Reine Mahunon; Benjamin Kouassi Yao. Characterization of Clays from the “Sè” Region in the South of Benin Used to Make Ceramic Water Filters. Am. J. Appl. Chem. 2017, 5(6), 90-95. doi: 10.11648/j.ajac.20170506.11
AMA Style
Akuemaho Virgile Onésime Akowanou, Martin Pépin Aina, Sènandémi Edwige Reine Mahunon, Benjamin Kouassi Yao. Characterization of Clays from the “Sè” Region in the South of Benin Used to Make Ceramic Water Filters. Am J Appl Chem. 2017;5(6):90-95. doi: 10.11648/j.ajac.20170506.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajac.20170506.11,
author = {Akuemaho Virgile Onésime Akowanou and Martin Pépin Aina and Sènandémi Edwige Reine Mahunon and Benjamin Kouassi Yao},
title = {Characterization of Clays from the “Sè” Region in the South of Benin Used to Make Ceramic Water Filters},
journal = {American Journal of Applied Chemistry},
volume = {5},
number = {6},
pages = {90-95},
doi = {10.11648/j.ajac.20170506.11},
url = {https://doi.org/10.11648/j.ajac.20170506.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajac.20170506.11},
abstract = {Clay materials have been used for centuries by local populations in ceramic pottery. This research aimed to examine natural clay as raw material for the manufacturing of ceramic pot filters. Thus, three clay samples were collected from a quarry in “Sè”, located in the southwestern part of the Benin Republic. All the samples were characterized using granulometric analysis, X-ray Powder Diffraction (XRD), loss on ignition (LOI), cation exchange capacity (CEC), and measurement of Atterberg’s limits. N2 adsorption technique were used to define specific surface areas and the major elements composing the clays were determined. The chemical and mineralogical analysis indicates that all of the samples contain various amounts of quartz and kaolinite, followed by muscovite and vermiculite. They also indicate that the clay materials are silico-aluminous clays. CEC and N2 adsorption showed as expected a low CEC and specific surface because of the presence of quartz and kaolinite quartz. The analyzed samples reveal that clays are very plastic, with an organic matter content ranging from 7.8% to 9.8% (loss on ignition). TGA analysis showed that the suitable sintering temperatures is from 700°C and above. Based on their mineral composition and physical properties, the clays are suitable as raw material for ceramic industry, especially for ceramic water filters.},
year = {2017}
}
TY - JOUR T1 - Characterization of Clays from the “Sè” Region in the South of Benin Used to Make Ceramic Water Filters AU - Akuemaho Virgile Onésime Akowanou AU - Martin Pépin Aina AU - Sènandémi Edwige Reine Mahunon AU - Benjamin Kouassi Yao Y1 - 2017/11/24 PY - 2017 N1 - https://doi.org/10.11648/j.ajac.20170506.11 DO - 10.11648/j.ajac.20170506.11 T2 - American Journal of Applied Chemistry JF - American Journal of Applied Chemistry JO - American Journal of Applied Chemistry SP - 90 EP - 95 PB - Science Publishing Group SN - 2330-8745 UR - https://doi.org/10.11648/j.ajac.20170506.11 AB - Clay materials have been used for centuries by local populations in ceramic pottery. This research aimed to examine natural clay as raw material for the manufacturing of ceramic pot filters. Thus, three clay samples were collected from a quarry in “Sè”, located in the southwestern part of the Benin Republic. All the samples were characterized using granulometric analysis, X-ray Powder Diffraction (XRD), loss on ignition (LOI), cation exchange capacity (CEC), and measurement of Atterberg’s limits. N2 adsorption technique were used to define specific surface areas and the major elements composing the clays were determined. The chemical and mineralogical analysis indicates that all of the samples contain various amounts of quartz and kaolinite, followed by muscovite and vermiculite. They also indicate that the clay materials are silico-aluminous clays. CEC and N2 adsorption showed as expected a low CEC and specific surface because of the presence of quartz and kaolinite quartz. The analyzed samples reveal that clays are very plastic, with an organic matter content ranging from 7.8% to 9.8% (loss on ignition). TGA analysis showed that the suitable sintering temperatures is from 700°C and above. Based on their mineral composition and physical properties, the clays are suitable as raw material for ceramic industry, especially for ceramic water filters. VL - 5 IS - 6 ER -
Information
Email: