Production of Pure Nano-Iron by Using Ball Milling Machine, Chemical Batch Reactor and K-M Micro Reactor

Mohamed Ahmed AbdelKawy; Ahmed H. El-Shazly; Yehia El Shazly

doi:doi:10.11648/j.ajac.s.2015030301.12

| Peer-Reviewed

Production of Pure Nano-Iron by Using Ball Milling Machine, Chemical Batch Reactor and K-M Micro Reactor

Mohamed Ahmed AbdelKawy, Ahmed H. El-Shazly, Yehia El Shazly

Published in American Journal of Applied Chemistry (Volume 3, Issue 3-1)

Received: 29 November 2014 Accepted: 30 December 2014 Published: 30 December 2014

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In this study, pure nano iron was produced by the top to down and bottom up techniques. top to down including production of nano iron by using ball mill machine and bottom up including two methods batch and K-M micro reactor. Different techniques were used for investigation and characterization of the produced nano iron particles such as UV-Vis, PSD, SEM, TEM and XRD. The produced Nano particle using micro mixer showed better characteristics than those produced using batch reactor and ball mill in many aspects such as homogeneity of the produced particles, particle size distribution and size. The results showed that 10 nm core diameter were obtained using Micro mixer as compared to 80 nm and 40 nm core diameter using batch reactor and ball mill respectively.

Published in	American Journal of Applied Chemistry (Volume 3, Issue 3-1) This article belongs to the Special Issue Nano-Technology for Environmental Aspects
DOI	10.11648/j.ajac.s.2015030301.12
Page(s)	8-12
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Nano Iron, Micro Reactor, Batch Reactor, Ball Mill

References

[1]	Y.Sun, X.Li , J. Cao , W.Zhang , H. Wang ‘Characterization of zero-valent iron nanoparticles’ Advances in Colloid and Interface Science,2006, 120 ,47–56.
[2]	R. Yuvakkumar, , V. Elango, V. Rajendran, N. Kannan ‘ Preparation and characterization of zero valent iron nano particles’ Digest Journal of Nanomaterials and Biostructures, 2011,6, 4, 1771-1776.
[3]	H. Nagasawa, N. Aoki, K. Mae ‘Design of a new micromixer for instant mixing based on the collision of micro segments’ Chem.Eng.Technol,2005,28,3,30-35 .
[4]	A. R. Rahmani, H.R. Ghaffari, M.T. Samadi ‘A Comparative study on arsenic (III) removal from Aqueous Solution using nano and micro sized zero valent iron ‘ Iran. J. Environ. Health. Sci. Eng., 2011, 8, 2, 175-180.
[5]	X. Li, D. Elliott, W. Zhang‘ Zero-Valent Iron Nanoparticles for Abatement of Environmental Pollutants’ Materials and Engineering Aspects Critical Reviews in Solid State and Materials Sciences, 2006,31,111–122
[6]	W. Yaacob, N. Kamaruzaman, A.Samsudin ‘Development of Nano-Zero Valent Iron for the Remediation of Contaminated Water’ Chemical Engineering Transactions, 2012, 28,100-107.
[7]	A. Akbari, , F. Mohamadzadeh ‘New Method of Synthesis of Stable Zero Valent Iron Nanoparticles (Nzvi) by Chelating Agent Diethylene Triamine Penta Acetic Acid (DTPA) and Removal of Radioactive Uranium From Ground Water by using Iron Nanoparticles’, JNS, 2012,2 - 175-181.
[8]	W. Zhang ‘Nanoscale iron particles for environmental remediation: An overview ’Review Journal of Nanoparticles Research, 2002, 5, 323–332

Cite This Article

Plain Text BibTeX RIS

APA Style

Mohamed Ahmed AbdelKawy, Ahmed H. El-Shazly, Yehia El Shazly. (2014). Production of Pure Nano-Iron by Using Ball Milling Machine, Chemical Batch Reactor and K-M Micro Reactor. American Journal of Applied Chemistry, 3(3-1), 8-12. https://doi.org/10.11648/j.ajac.s.2015030301.12

Copy | Download

ACS Style

Mohamed Ahmed AbdelKawy; Ahmed H. El-Shazly; Yehia El Shazly. Production of Pure Nano-Iron by Using Ball Milling Machine, Chemical Batch Reactor and K-M Micro Reactor. Am. J. Appl. Chem. 2014, 3(3-1), 8-12. doi: 10.11648/j.ajac.s.2015030301.12

Copy | Download

AMA Style

Mohamed Ahmed AbdelKawy, Ahmed H. El-Shazly, Yehia El Shazly. Production of Pure Nano-Iron by Using Ball Milling Machine, Chemical Batch Reactor and K-M Micro Reactor. Am J Appl Chem. 2014;3(3-1):8-12. doi: 10.11648/j.ajac.s.2015030301.12

Copy | Download

@article{10.11648/j.ajac.s.2015030301.12,
  author = {Mohamed Ahmed AbdelKawy and Ahmed H. El-Shazly and Yehia El Shazly},
  title = {Production of Pure Nano-Iron by Using Ball Milling Machine, Chemical Batch Reactor and K-M Micro Reactor},
  journal = {American Journal of Applied Chemistry},
  volume = {3},
  number = {3-1},
  pages = {8-12},
  doi = {10.11648/j.ajac.s.2015030301.12},
  url = {https://doi.org/10.11648/j.ajac.s.2015030301.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajac.s.2015030301.12},
  abstract = {In this study, pure nano iron was produced by the top to down and bottom up techniques. top to down including production of nano iron by using ball mill machine and bottom up including two methods batch and K-M micro reactor. Different techniques were used for investigation and characterization of the produced nano iron particles such as UV-Vis, PSD, SEM, TEM and XRD. The produced Nano particle using micro mixer showed better characteristics than those produced using batch reactor and ball mill in many aspects such as homogeneity of the produced particles, particle size distribution and size. The results showed that 10 nm core diameter were obtained using Micro mixer as compared to 80 nm and 40 nm core diameter using batch reactor and ball mill respectively.},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Production of Pure Nano-Iron by Using Ball Milling Machine, Chemical Batch Reactor and K-M Micro Reactor
AU  - Mohamed Ahmed AbdelKawy
AU  - Ahmed H. El-Shazly
AU  - Yehia El Shazly
Y1  - 2014/12/30
PY  - 2014
N1  - https://doi.org/10.11648/j.ajac.s.2015030301.12
DO  - 10.11648/j.ajac.s.2015030301.12
T2  - American Journal of Applied Chemistry
JF  - American Journal of Applied Chemistry
JO  - American Journal of Applied Chemistry
SP  - 8
EP  - 12
PB  - Science Publishing Group
SN  - 2330-8745
UR  - https://doi.org/10.11648/j.ajac.s.2015030301.12
AB  - In this study, pure nano iron was produced by the top to down and bottom up techniques. top to down including production of nano iron by using ball mill machine and bottom up including two methods batch and K-M micro reactor. Different techniques were used for investigation and characterization of the produced nano iron particles such as UV-Vis, PSD, SEM, TEM and XRD. The produced Nano particle using micro mixer showed better characteristics than those produced using batch reactor and ball mill in many aspects such as homogeneity of the produced particles, particle size distribution and size. The results showed that 10 nm core diameter were obtained using Micro mixer as compared to 80 nm and 40 nm core diameter using batch reactor and ball mill respectively.
VL  - 3
IS  - 3-1
ER  -

Copy | Download

Author Information

Mohamed Ahmed AbdelKawy

Chemical and Petrochemical Engineering Dept., Egypt-Japan University of Science and Technology (E-JUST), New Borg ELArab city, Alexandria, Egypt
Ahmed H. El-Shazly

Chemical and Petrochemical Engineering Dept., Egypt-Japan University of Science and Technology (E-JUST), New Borg ELArab city, Alexandria, Egypt
Yehia El Shazly

Chemical Engineering Dept., Faculty of Engineering, Alexandria University, Alexandria, Egypt

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Mohamed Ahmed AbdelKawy, Ahmed H. El-Shazly, Yehia El Shazly. (2014). Production of Pure Nano-Iron by Using Ball Milling Machine, Chemical Batch Reactor and K-M Micro Reactor. American Journal of Applied Chemistry, 3(3-1), 8-12. https://doi.org/10.11648/j.ajac.s.2015030301.12

Copy | Download

ACS Style

Mohamed Ahmed AbdelKawy; Ahmed H. El-Shazly; Yehia El Shazly. Production of Pure Nano-Iron by Using Ball Milling Machine, Chemical Batch Reactor and K-M Micro Reactor. Am. J. Appl. Chem. 2014, 3(3-1), 8-12. doi: 10.11648/j.ajac.s.2015030301.12

Copy | Download

AMA Style

Mohamed Ahmed AbdelKawy, Ahmed H. El-Shazly, Yehia El Shazly. Production of Pure Nano-Iron by Using Ball Milling Machine, Chemical Batch Reactor and K-M Micro Reactor. Am J Appl Chem. 2014;3(3-1):8-12. doi: 10.11648/j.ajac.s.2015030301.12

Copy | Download

@article{10.11648/j.ajac.s.2015030301.12,
  author = {Mohamed Ahmed AbdelKawy and Ahmed H. El-Shazly and Yehia El Shazly},
  title = {Production of Pure Nano-Iron by Using Ball Milling Machine, Chemical Batch Reactor and K-M Micro Reactor},
  journal = {American Journal of Applied Chemistry},
  volume = {3},
  number = {3-1},
  pages = {8-12},
  doi = {10.11648/j.ajac.s.2015030301.12},
  url = {https://doi.org/10.11648/j.ajac.s.2015030301.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajac.s.2015030301.12},
  abstract = {In this study, pure nano iron was produced by the top to down and bottom up techniques. top to down including production of nano iron by using ball mill machine and bottom up including two methods batch and K-M micro reactor. Different techniques were used for investigation and characterization of the produced nano iron particles such as UV-Vis, PSD, SEM, TEM and XRD. The produced Nano particle using micro mixer showed better characteristics than those produced using batch reactor and ball mill in many aspects such as homogeneity of the produced particles, particle size distribution and size. The results showed that 10 nm core diameter were obtained using Micro mixer as compared to 80 nm and 40 nm core diameter using batch reactor and ball mill respectively.},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Production of Pure Nano-Iron by Using Ball Milling Machine, Chemical Batch Reactor and K-M Micro Reactor
AU  - Mohamed Ahmed AbdelKawy
AU  - Ahmed H. El-Shazly
AU  - Yehia El Shazly
Y1  - 2014/12/30
PY  - 2014
N1  - https://doi.org/10.11648/j.ajac.s.2015030301.12
DO  - 10.11648/j.ajac.s.2015030301.12
T2  - American Journal of Applied Chemistry
JF  - American Journal of Applied Chemistry
JO  - American Journal of Applied Chemistry
SP  - 8
EP  - 12
PB  - Science Publishing Group
SN  - 2330-8745
UR  - https://doi.org/10.11648/j.ajac.s.2015030301.12
AB  - In this study, pure nano iron was produced by the top to down and bottom up techniques. top to down including production of nano iron by using ball mill machine and bottom up including two methods batch and K-M micro reactor. Different techniques were used for investigation and characterization of the produced nano iron particles such as UV-Vis, PSD, SEM, TEM and XRD. The produced Nano particle using micro mixer showed better characteristics than those produced using batch reactor and ball mill in many aspects such as homogeneity of the produced particles, particle size distribution and size. The results showed that 10 nm core diameter were obtained using Micro mixer as compared to 80 nm and 40 nm core diameter using batch reactor and ball mill respectively.
VL  - 3
IS  - 3-1
ER  -

Copy | Download