Evaluation Conduct of Deep Foundations Using 3D Finite Element approach
American Journal of Civil Engineering
Volume 1, Issue 3, November 2013, Pages: 129-134
Received: Dec. 6, 2013; Published: Dec. 20, 2013
Views 2691      Downloads 221
Author
Jasim M Abbas, Dept. of Civil Engineering/ Diyala University, Baqhuba, Iraq
Article Tools
PDF
Follow on us
Abstract
In most practical situations, the pile either include circular or rectangular cross-section. The pile with circular cross-sectional shape usually analyzed in previous studies and little for the second type. While, no studies included comparison between those common types to understand and recommend which is batter for case of deep foundations. Therefore, this study is mainly deal with the vertical pile response under vertical load (i.e. no horizontal loads) when take into account the shape factor. To achieve the objective of this research, 3D finite element approach has been used to simulate the whole deep foundation case study. This study includes many factors, such as pile depth that measured below ground surface, soil strength parameter and soil types. It can be seems that little influence of shape factor on the vertical performance of deep foundation. Therefore, it can be recommended that if no any source of lateral load, it can be used any type and it is depending only on cost of pile types.
Keywords
Deep Foundation, Shape, Vertical Load, Pile Depth, Soil Type
To cite this article
Jasim M Abbas, Evaluation Conduct of Deep Foundations Using 3D Finite Element approach, American Journal of Civil Engineering. Vol. 1, No. 3, 2013, pp. 129-134. doi: 10.11648/j.ajce.20130103.17
References
[1]
Prakash, S. and H.D. Sharma (1990) "Pile Foundation in Engineering Practice," John Wiley and Sons, Inc. New York, pp.27-28
[2]
Randolph, M. F. & Wroth, C. P. (1978). Analysis of deformation of vertically loaded piles. J. Geotech. Engng Div., ASCE 104, No. 12, 1465±1488.
[3]
Cooke, R. W. (1974). The settlement of friction pile foundations. Proc. Conf. on Tall Buildings, Kuala Lumpur.
[4]
Lee, C.Y. 1993. Settlement of pile group - practical approach. Journal of the eotechnical Engineering Division, ASCE, 119(9): 1449-1461
[5]
Guo, W. D. and Randolph, M. F. (1996), "Torsional piles in non-homogenous media." Computer and Geotechnics , Vol 19, No. 4, pp.265-287
[6]
Guo, W. D. and Randolph, M. F. (1999), "An efficient approach for settlement prediction ofpile groups." Geotechnique. Vol. 49, No. 2, pp.161-179
[7]
O'Neill, M.W., Ghazzaly, O.I. and Ha, H.B., 1977, "Analysis of Three- Dimensional Pile Groups With Nonlinear Soil Response and Pile –Soil – Pile Interaction", Proc of the 9th
[8]
Annual Offshore Technology Conference, Houston, Paper OTC 2838, pp. 245 – 256.
[9]
Poulos, H.G. and Davis, E.H., 1980, "Pile Foundation Analysis and Design", Wiley, New York.
[10]
Chow, W.K. 1986. Analysis of vertically loaded pile groups. Inter- national Journal for Numerical and Analytical Methods in. Geomechanics, 10: 59–72.
[11]
Leung and Y.K. Chow, Response of pile groups subjected to lateral loads, Int. J. Numer. Anal. Methods Geomech. 11 (1) (1987
[12]
Butterfield, R. and Banerjee, P.K., 1971, "The Elastic of Compressible Piles and Pile Groups", Geotechnique, Vol. 21, No. 1, pp. 43 -60.
ADDRESS
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
U.S.A.
Tel: (001)347-983-5186