Seismic Response Evaluation of High-Rise Building with and Without Fluid Viscous Damper
American Journal of Civil Engineering
Volume 6, Issue 5, September 2018, Pages: 167-177
Received: Dec. 23, 2018;
Published: Dec. 24, 2018
Views 711 Downloads 184
Khalil Yahya Mohammed Almajhali, School of Mechanics, Civil Engineering and Architecture, Northwestern Polytechnical University, Xi’an, China
Bin Xu, School of Mechanics, Civil Engineering and Architecture, Northwestern Polytechnical University, Xi’an, China
Qingxuan Meng, School of Mechanics, Civil Engineering and Architecture, Northwestern Polytechnical University, Xi’an, China
The major lateral load of the high structures is the earthquake load. In the high rise buildings, the structural response increases exponentially in response to earthquake load. Therefore, the damping has significant function in design of Earthquake Resistant High Structures, which can decrease the response of the structure when exposed to lateral loads. The energy produced by earthquake will be absorbed by these devices and the load acting on the main structure of the building will reduce significantly. The fluid viscous dampers are used to dissipate energy and lessen the response of reinforced concrete buildings. The main function of structure is to carry the lateral loads and transmit them well to the foundation. The lateral loads enjoined on the structures are dynamic in nature, which cause vibrations in the structure. In the current study, the responses of the structures having square plans with different cross-sections are analyzed by the software ETABS 2015 based on the consideration of Fluid Viscous Damper. The results of numerical examples show that fluid viscous damper (250) can reduce the response of the structures effectively, including the base shear of the buildings, and the structures with square columns performs perfect and have good earthquake resistant characteristics when compared to structures with rectangular columns regardless of the flooring plan.
Khalil Yahya Mohammed Almajhali,
Seismic Response Evaluation of High-Rise Building with and Without Fluid Viscous Damper, American Journal of Civil Engineering.
Vol. 6, No. 5,
2018, pp. 167-177.
M. R. Arefi, “A study on the damping ratio of the viscous fluid dampers in the braced frames,” vol. 3, no. 4, pp. 1223–1235, 2014.
J. Marti, M. Crespo, and F. Martinez, “Seismic Isolation and Protection Systems,” Seism. Isol. Prot. Syst., vol. 1, no. 1, pp. 125–140, 2010.
M. K. Muthukumar G, “Analytical modeling of damping,” indian Concr. J., vol. 88, no. 4, 2014.
K.-H. Chang, Structural Analysis, vol. 163. 2009.
Y. G. Zhao and T. Ono, “Moment methods for structural reliability,” Struct. Saf., vol. 23, no. 1, pp. 47–75, 2001.
V. Umachagi, K. Venkataramana, G. R. Reddy, and R. Verma, “Applications of Dampers for Vibration Control of Structures: an Overview,” Int. J. Res. Eng. Technol., pp. 6–11, 2013.
Ö. Atlayan, “Effect of Viscous Fluid Dampers on Steel Moment Frame Designed for Strength and Hybrid Steel Moment Frame Design,” Environ. Eng., 2008.
A. Chopra, “Dynamics of structures,” 2012.
S. Infanti, J. Robinson, and R. Smith, “Viscous Dampers For High-Rise Buildings,” 14th World Conf. Earthq. Eng., 2008.
J. Marko, D. Thambiratnam, and N. Perera, “Influence of damping systems on building structures subject to seismic effects,” Eng. Struct., vol. 26, no. 13, pp. 1939–1956, 2004.
V. S. Balkanlou, M. R. Bagerzadeh, B. B. Azar, and A. Behravesh, “Evaluating Effects of Viscous Dampers on optimizing Seismic Behavior of Structures,” no. 2007, 2013.
S. Amir and H. Jiaxin, “Optimum Parameter of a Viscous Damper for Seismic and Wind Vibration,” vol. 8, no. 2, pp. 192–196, 2014.
B. S. Taranath, Reinforced Concrete Design of Tall Buildings.
LIYA MATHEW & C. PRABHA, “Effect of Fluid Viscous Dampers in Multi-Storeyed Buildings,” IMPACT Int. J. Res. Eng. Technol. (IMPACT IJRET), vol. 2, no. 9, pp. 59–64, 2014.
R. Gettu and M. Santhanam, “Retrofit of non-engineered buildings,” Handb. Seism. retrofit Build., no. April, p. 471, 2007.
J. Otten, J. Luntz, D. Brei, K. A. Strom, A. L. Browne, and N. L. Johnson, “Proof-of-Concept of the Shape Memory Alloy ReseTtable Dual Chamber Lift Device for Pedestrian Protection With Tailorable Performance,” J. Mech. Des., vol. 135, no. 6, p. 61008, Apr. 2013.
ASCE 7-98, 1998. Minimum Design Loads for Buildings and Other Structures. American Society of Civil Engineers.
R. K. Goel, C. A. Booker, "Inelastic seismic response of asymmetric systems", Earthq Eng Struct Dyn, vol. 30, 2001.
Design Formulations for Supplemental Viscous Dampers to Building Structures.