American Journal of Civil Engineering
Volume 3, Issue 2-2, March 2015, Pages: 69-74
Received: Nov. 4, 2015;
Accepted: Nov. 5, 2015;
Published: Nov. 30, 2015
Views 4511 Downloads 153
Vahid Rezvani, Department of Civil Engineering, Hakim Sabzevari University, Sabzevar, Iran
Hassan Saghi, Department of Civil Engineering, Hakim Sabzevari University, Sabzevar, Iran
Huge amount of sulfur production as a side product in petrochemical industries and its low application in country has been a challenging issue. In this paper, application of sulfur as a partial substitute for bitumen in process of asphalt mixture production is investigated. According to the results, the characteristics of the sulfur extended asphalt in comparison with the conventional asphalt made from pure bitumen, and the impact of sulfur addition on asphalt performance are expressed and the optimized formula for making the asphalt mixture is obtained. In this content, the modified asphalt was produced in mass production scale and its performance was studied. In this paper, the method of sulfur addition to pure bitumen and then its mixture with aggregate and finally optimized condition of sulfur modified asphalt production regarding pollution and environmental issues are also proposed.
Characteristics and Preparation Method of Sulfur Extended Asphalt Mixtures, American Journal of Civil Engineering. Special Issue: Research and Practices of Civil Engineering in Developing Countries.
Vol. 3, No. 2-2,
2015, pp. 69-74.
Filippis P.D., "Sulfur–Extended Asphalt, Reaction Kinetics of H2S Evolution", Fuel, Vol. 77, No.5, 1998.
Weber H., "Sulfur- Asphalt & its Global Aspects", Sulfur Institute, 19th Sulfur Phosphate Symposium, 2003.
Mills D.R., "Field Trial with Sulfur- Extended – Asphalt (SEA) Binders", Sulfur Research & Development, Vol.3, No.3, 1980.
Nazarbegi Ali Ehsan, "sulfur application in asphalt mixture for roads", research report of oil industry research center 1998.
Strickland D., "Performance Properties of Paving Mixtures Made with Modified Sulfur Pellets", International Symposium on Antennas & Propagation (ISAP), Taipie, Taiwan, 2008.
Asphalt Institute, "State-of-Knowledge on the Use of Sulfur–Extended Asphalt (SEA)", 2007.
John S.C., "Review of Relationships between Modified Asphalt Properties and Pavement Performance", SHRP-A-631, 1993.
Love G.D., "Sulfur-Paving Material of the Future", Sulfur Research & Development, Vol.3, No.3, 1980.
Deme B.H., "Mix-Paver-New Approach to Sulfur Paving", Sulfur Research & Development, Vol.3, No.3, 1980.
Alikhani, "sulfur use in asphalt and its safety", road development organization, 1999.
Petrossi V., "Reactions & Technological Properties of Sulfur - Treated Asphalt", Industrial Engineering of Chemical Production Research and Development, Vol.11, No.2, 1972.
Miller L.J., "A Technical Review of Sulfur– Association Asphalt Paving Technologists", Vol. 42, 1981.
Tabatabaei A.M., "sulfur application in asphalt pavement", journal of technical faculty, No 46, 1984.
Parrett F., "Sulfur Extended Asphalt for Highways", Civil Engineering, Vol. 28, 1984.
"Solid Sulfur- Extended Asphalt Composition and Method and Apparatus therefore", U.S. Patent, No.4, 1982.
Taylor J.A., Kennepohl G.J., "Environmental Aspects of Paving with Sulfur-Asphalt", Can. Tech. of Asphalt Assoc., 1980.
Bissada A., "Rheological Characteristics of Sulfur Extended Asphalts used for Road Pavements", Sulfur Research & Development, Vol.9, 1985.
Kandhal P.S., "Evaluation of Sulfur Extended Asphalt Binders in Bituminous Paving Mixtures", Association of Asphalt Paving Technologists, Vol.51, 1982.
Liddle W. A., Mahoney J.R., "Sulfur Extended Asphalt Pavement Evaluation for the Baker River Highway", FHWA Report, 1983.