Interaction Mechanism of the Frost Heaving of the Filler and Skeleton Particles in a Micro-Frost-Heaving Filling Material
American Journal of Civil Engineering
Volume 6, Issue 4, July 2018, Pages: 109-117
Received: Jun. 10, 2018;
Accepted: Jul. 16, 2018;
Published: Sep. 14, 2018
Views 843 Downloads 86
Xiaoyan Du, State Key Laboratory for Track Technology of High-Speed Railway, China Academy of Railway Sciences Corporation Limited, Beijing, China
Yangsheng Ye, State Key Laboratory for Track Technology of High-Speed Railway, China Academy of Railway Sciences Corporation Limited, Beijing, China
Qianli Zhang, State Key Laboratory for Track Technology of High-Speed Railway, China Academy of Railway Sciences Corporation Limited, Beijing, China
Degou Cai, State Key Laboratory for Track Technology of High-Speed Railway, China Academy of Railway Sciences Corporation Limited, Beijing, China
Follow on us
To address the adverse effects of the frost heaving of subgrades in regions with seasonal frozen soil on the smoothness of high-speed railway tracks, the effects of several factors—including filler, water content and external loading—on a micro-frost-heaving (MFH) filling material were studied through laboratory experiments and theoretical analysis. In addition, the interaction mechanism between the filler and skeleton particles during the frost heaving process was analyzed. The results show the following: The MFH filling material was composed of a coarse-grained skeleton, a filler between skeleton particles and the remaining unfilled voids. When the filling ratio of the filler was 0.25, the filling material underwent initial macroscopic frost heaving. An overlying load could inhibit the filling material from frost heaving. During the frost heaving process, the volume of coarse skeleton particles with high stiffness remained almost unchanged, whereas the filler expanded in volume and thus filled the remaining voids between skeleton particles and lifted the skeleton particles, resulting in macroscopic frost heaving of the filling material. When their ratio was relatively high, the remaining voids between skeleton particles had a strong absorptivity and weakened the capacity of the filler to lift the skeleton particles. The filler raised the skeleton particles, resulting in an increase in the gaps between them, which in turn facilitated the filling action of the filler. When the skeleton structure was stable, the filling action of the filler was more pronounced. The frost heaving of an MFH filling material is in fact a dynamic equilibrium process between the filling and lifting actions of the filler.
Frozen Soil Subgrade, Seasonal Frozen Soil, Micro-Frost-Heaving Filling Material, Skeleton Particle, Filler, Frost Heaving Mechanism
To cite this article
Interaction Mechanism of the Frost Heaving of the Filler and Skeleton Particles in a Micro-Frost-Heaving Filling Material, American Journal of Civil Engineering.
Vol. 6, No. 4,
2018, pp. 109-117.
Copyright © 2018 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Y. S. Ye (2004). Railway subgrade filling material classification. China Railway Science. pp. 35–41.
X. Du (2015). A Study on the Frost Heave Mechanism of Micro-Frost-Heave Filling based on The Interaction of Frost Heave of Filling Material and Coarse Particles Skeleton. Beijing: China Academy of Railway Sciences.
Y. S. Ye, Q. L. Zhang (2016). Study on Frost Heaving Law of filling featuring micro frost heaving for high speed railway subgrade. China Railway Science. pp. 82–85.
Y. Guo (2016). Study on the effect of subgrade Frost Heaving on the deformation properties of track structure and ITS vehicle dynamic behavior in high speed railway. Master Degree Thesis. Southwest Jiao Tong University.
J. F. Zheng, S. P. Zhao, W. Ma, et al. (2009). Study of the effect of freezing on frozen soil specimen preparation. Journal of Glaciology and Geocryology. Vol. 31, pp. 130–138.
Y. P. Liu (2016). Treatment technology of subgrade Frost Heaving for high speed railway in severe cold area. Railway Engineering. pp. 92–97.
C. Y. Zhang (2018). Research on the Frost-heave performances of filling material consisted of coarse grained soil for high－speed railway subgrade. Journal of Railway Engineering Society.
J. Y. Leng (2015). Experimental research of the subgrade padding Frost Heaving of high-speed railway. Journal of Glaciology and Geocryology. Vol. 37, pp. 440–445.
J. Lan (2016). Experimental study on Frost Heave performance improvement of coarse grain filling in high speed railway subgrade. China Railway Science. pp. 105.
Y. Tian, J. Liu and L. Peng (2010). Experimental study on frost action of fine-grained soils under dynamic and static loads. Chinese Journal of Geotechnical Engineering. Vol. 32, pp. 1882–1888.
C. Wang, R. Zhang, X. Zhao, et al. (2014). Frost heaving monitoring system and frost heaving rules for the high-speed railway embankment in the seasonally frozen soil regions. Journal of Glaciology and Geocryology. Vol. 36, pp. 962–968.
H. Zhao, H. Yan, Q. Zhang, et al. (2014). Study on frost-heave performances of filling material consisted of coarse grained soils for subgrade bed in season frozen region. Railway Engineering. pp. 92–94.
L. Jiang, L. Wang, X. Zhang, et al. (2009). Experiment on normal frozen-heave force of low liquid-limit clay of highway roadbed in seasonal frost region. China Journal of Highway and Transport. Vol. 2.
X. Du, Y. Ye, Q. Zhang, et al. (2016). Proposal to apply anti-frost filling material of high speed railway subgrade in seasonal frozen soil region. Railway Engineering. pp. 43–46.
G. T. Zhao (2017). Distribution features of fine-grain in filling material of High－speed railway subgrade and its impact on Frost Heaving. RNAL of Railway Engineering Society.
M. L. Zhao (2016). Research on Anti-Frost design for railway subgrade in seasonal Frozen earth area. China Railway Economic Planning and Research Institute. pp. 42–49.
Q. Zhang, Z. Han, B. Lü (2005). Analysis and design method of subgrade bed in high speed railway. China Railway Science. pp. 55–59.
Z. Q. Wang (2017). Study on the Frost Heaving behavior and strength of coarse-grained fillings form high-speed railway sungrade in cold region. Master Degree Thesis. Beijing Jiao Tong University.