American Journal of Civil Engineering

| Peer-Reviewed |

An Overview on the Seismic Design of Braced Frames

Received: 10 February 2014    Accepted:     Published: 30 March 2014
Views:       Downloads:

Share This Article

Abstract

Seismic design of steel braced frames in the modern building codes follow the capacity design approach where some of the members are obliged to dissipate energy whereas others are taken care to be protected. In this paper the seismic design methodologies used by European and American approaches for Concentric Cross Braced Frames (CCBF) and Eccentric Braced Frames (EBF) are highlighted. Synoptic tables for the design of such frames of the most advance seismic codes i.e., Eurocode 8 and the seismic provisions of American Institute of Steel Construction (AISC) are provided. Emphasizes are made on the provisions of Eurocode 8 both for CCBF and EBF. Finally, a general conclusion is drawn when dealing with CCBF and EBF

DOI 10.11648/j.ajce.20140202.15
Published in American Journal of Civil Engineering (Volume 2, Issue 2, March 2014)
Page(s) 41-47
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Steel Brace Frames, Capacity Design, Cross Bracing, Eccentric Bracing, Seismic Design

References
[1] T. Paulay and M. J. N. Priestley, Seismic design of reinforced concrete and masonry buildings: Wiley Online Library, 1992.
[2] A. Plumier, "General report on local ductility," Journal of Constructional Steel Research, vol. 55, pp. 91-107, 2000.
[3] G. Brandonisio, et al., "Seismic design of concentric braced frames," Journal of Constructional Steel Research, vol. 78, pp. 22-37, 11// 2012.
[4] M. T. Naqash, "Optimum design of Steel Moment Resisting Frames using Eurocode 8," PhD Doctorate Thesis, Department of Engineering and Geology, University of Chiete and Pescara, Pescara, 2012.
[5] R. Sabelli, et al., "Seismic demands on steel braced frame buildings with buckling-restrained braces," Engineering Structures, vol. 25, pp. 655-666, 2003.
[6] P. Uriz and S. A. Mahin, "Seismic performance assessment of concentrically braced steel frames," in Proceedings of the 13th world conference on earthquake engineering, 2004, p. 6.
[7] ANSI/AISC-360-10, "Specification for structural steel buildings," ed. Chicago, Illinois 60601-1802: American Institute of Steel Construction, 2010.
[8] ANSI/AISC-341-10, "Seismic provisions for structural steel buildings," ed. Chicago, Illinois 60601-1802: American Institute of Steel Construction, 2010.
[9] A. Elghazouli, "Assessment of capacity design approaches for steel framed structures," Journal of Steel Structures, vol. 5, pp. 465-475, 2005.
[10] EN-1993-1-1, "Eurocode 3. Design of steel structures, Part 1-1: General rules and rules for buildings," in European Committee for Standardization, CEN, ed. 36 B-1050, Brussels, 2005.
[11] EN-1998-1, "Eurocode 8, Design of Structures for Earthquake Resistance, Part 1: General rules, seismic actions and rules for buildings," in European Committee for Standardization, CEN, ed. 36 B-1050, Brussels, 2005.
[12] ASCE/SEI-7-10, "Minimum design loads for buildings and other structures," ed. 1801 Alexander Bell Drive Reston, Virginia 20191: American Society of Civil Engineers, 2010.
[13] M. T. Naqash, et al., "Seismic design of Steel Moment Resisting frames-European Versus American Practice," NED University Journal of Research, vol. THEMATIC ISSUE ON EARTHQUAKE, 2012, In Press In Press.
[14] EN-1998-1, "Eurocode 8, Design of Structures for Earthquake Resistance, Part 1: General rules, seismic actions and rules for buildings," in European Committee for Standardization, CEN, ed. 36 B-1050, Brussels, 2005.
[15] O. Bursi and J.-P. Jaspart, "Calibration of a finite element model for isolated bolted end-plate steel connections," Journal of Constructional Steel Research, vol. 44, pp. 225-262, 1997.
[16] C. W. Roeder and E. P. Popov, "Inelastic behavior of eccentrically braced steel frames under cyclic loadings," NASA STI/Recon Technical Report N, vol. 78, p. 20375, 1977.
Author Information
  • Department of Civil Engineering, IQRA National University, Peshawar, Pakistan

  • Department of Civil Engineering, Comsats Institute of Information Technology, Abbottabad, Pakistan

  • Department of Civil Engineering, QUCEST, Larkana, Sindh, Pakistan

Cite This Article
  • APA Style

    Muhammad Tayyab Naqash, Khalid Mahmood, Salim Khoso. (2014). An Overview on the Seismic Design of Braced Frames. American Journal of Civil Engineering, 2(2), 41-47. https://doi.org/10.11648/j.ajce.20140202.15

    Copy | Download

    ACS Style

    Muhammad Tayyab Naqash; Khalid Mahmood; Salim Khoso. An Overview on the Seismic Design of Braced Frames. Am. J. Civ. Eng. 2014, 2(2), 41-47. doi: 10.11648/j.ajce.20140202.15

    Copy | Download

    AMA Style

    Muhammad Tayyab Naqash, Khalid Mahmood, Salim Khoso. An Overview on the Seismic Design of Braced Frames. Am J Civ Eng. 2014;2(2):41-47. doi: 10.11648/j.ajce.20140202.15

    Copy | Download

  • @article{10.11648/j.ajce.20140202.15,
      author = {Muhammad Tayyab Naqash and Khalid Mahmood and Salim Khoso},
      title = {An Overview on the Seismic Design of Braced Frames},
      journal = {American Journal of Civil Engineering},
      volume = {2},
      number = {2},
      pages = {41-47},
      doi = {10.11648/j.ajce.20140202.15},
      url = {https://doi.org/10.11648/j.ajce.20140202.15},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ajce.20140202.15},
      abstract = {Seismic design of steel braced frames in the modern building codes follow the capacity design approach where some of the members are obliged to dissipate energy whereas others are taken care to be protected. In this paper the seismic design methodologies used by European and American approaches for Concentric Cross Braced Frames (CCBF) and Eccentric Braced Frames (EBF) are highlighted. Synoptic tables for the design of such frames of the most advance seismic codes i.e., Eurocode 8 and the seismic provisions of American Institute of Steel Construction (AISC) are provided. Emphasizes are made on the provisions of Eurocode 8 both for CCBF and EBF. Finally, a general conclusion is drawn when dealing with CCBF and EBF},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - An Overview on the Seismic Design of Braced Frames
    AU  - Muhammad Tayyab Naqash
    AU  - Khalid Mahmood
    AU  - Salim Khoso
    Y1  - 2014/03/30
    PY  - 2014
    N1  - https://doi.org/10.11648/j.ajce.20140202.15
    DO  - 10.11648/j.ajce.20140202.15
    T2  - American Journal of Civil Engineering
    JF  - American Journal of Civil Engineering
    JO  - American Journal of Civil Engineering
    SP  - 41
    EP  - 47
    PB  - Science Publishing Group
    SN  - 2330-8737
    UR  - https://doi.org/10.11648/j.ajce.20140202.15
    AB  - Seismic design of steel braced frames in the modern building codes follow the capacity design approach where some of the members are obliged to dissipate energy whereas others are taken care to be protected. In this paper the seismic design methodologies used by European and American approaches for Concentric Cross Braced Frames (CCBF) and Eccentric Braced Frames (EBF) are highlighted. Synoptic tables for the design of such frames of the most advance seismic codes i.e., Eurocode 8 and the seismic provisions of American Institute of Steel Construction (AISC) are provided. Emphasizes are made on the provisions of Eurocode 8 both for CCBF and EBF. Finally, a general conclusion is drawn when dealing with CCBF and EBF
    VL  - 2
    IS  - 2
    ER  - 

    Copy | Download

  • Sections