Different harmonic aggregation techniques for assessment of current harmonic levels at points of measurement are investigated and compared to each other. The interaction effect in aggregation of harmonic currents is investigated. Several approaches including IEC 61000-3-6 recommended method are utilized and compared.
| Published in | Journal of Electrical and Electronic Engineering (Volume 3, Issue 5) |
| DOI | 10.11648/j.jeee.20150305.13 |
| Page(s) | 117-120 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Electromagnetic Compatibility, Harmonic Distortion, Harmonic Aggregation, Power Quality, Current Harmonics, Interaction Effect
| [1] | Allen, George W, “Design of Power-Line Monitoring Equipment”, IEEE Transactions on Power Apparatus and Systems, Vol. PAS-90, Issue: 6, Nov. 1971. |
| [2] | S Chattopadhyay, M Mitra, S Sengupta, “Electric power quality”, Springer, 2011. |
| [3] | G. D. Castro, A., M. Bollen and A. Moreno-Monuz, “Street Lamps Aggregation Analysis Through IEC 61000-3-6 Approach”, International Conference on Electricity Distribution, Stockholm, June 2013. |
| [4] | Pasand, Mohammad Mahdy Share, and Zahra Rahmatian. "Harmonic aggregation techniques for power quality assessment a standard framework." International Journal of Engineering & Technology 3.3 (2014): 365-371. |
| [5] | Pasand, MM Share. "Harmonic Aggregation Techniques for Power Quality Assesment A review of different methods." International Journal of Engineering Science and Technology 6.7 (2014): 423. |
| [6] | IEEE std. 519, “Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems”, 1992. |
| [7] | IEC 61000, “Electromagnetic compatibility (EMC) – Part 3-6: Limits – Assessment of emission limits for the connection of distorting installations to MV, HV and EHV power systems”, Basic EMC publication, ed.2, 2008. (IEC/TR 61000-3-6). |
| [8] | Y. Baghzouz, et al., “Time-Varying Harmonics: Part II—Harmonic Summation and Propagation”, IEEE Transactions On Power Systems, Vol. 17, No. 1, 2002. |
| [9] | Y. Baghzouz, Task Force on Probabilistic Aspects of Harmonics: “Time-varying harmonics: Part I—Characterizing measured data,” IEEE Trans. Power Delivery, vol. 13, pp. 938–944, 1998. |
| [10] | A. Cavallini, R. Langella, et al., “Gaussian modeling of harmonic vectors in power systems,” in IEEE 8th Int. Conf. Harmonics and Quality of Power, Athens, Greece, Oct. 14–16, 1998, pp. 1010–1017. |
| [11] | IEC 61000‐3‐2: 2009, Electromagnetic Compatibility (EMC) - Part 3-2: Limits-Limits for harmonic current emissions (Equipment input current ≤ 16A per phase) (IEC 61000-3-2). |
| [12] | CIGRE WG 36-05, “Assessing voltage quality with relation to harmonics, flicker and unbalance”, France, CIGRE Rep. 36-203, 34th Session, 1992. |
| [13] | Medeiros, F.; Brasil, D. C.; Ribeiro, P. F.; Marques, C. A. G.; Duque, C. A. “A new approach for harmonic summation using the methodology of IEC 61400-21”, 14th International Conference on Harmonics and Quality of Power (ICHQP), 2010. |
| [14] | Hsiao, Y. “Design of Filters for Reducing Harmonic Distortion and Correcting Power Factor in Industrial Distribution Systems.” Tamkang Journal of Science and Engineering, 4(3), 193-199, 2001. |
| [15] | Wakileh, G. J. “Power systems harmonics: fundamentals, analysis, and filter design”, Berlin: Springer, 2001. |
| [16] | Persson, Jonas,"Comparing Harmonics Mitigation Techniques." (2014). |
| [17] | Buccella, Concettina, et al. "Harmonic mitigation technique for multilevel inverters in power systems." Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 2014 International Symposium on. IEEE, 2014. |
| [18] | Aye, Thet Mon, and Soewin Naing. "Analysis of Harmonic Reduction by Using Passive Harmonic Filters." (2014). |
| [19] | Sharma, Vandana, and Anurag Singh Tomer. "Comparative Analysis on Control Methods of Shunt Active Power Filter for Harmonics Mitigation." International Journal of Science and Research 3 (2014). |
| [20] | Yang, Kai, Math HJ Bollen, and E. O. Anders Larsson. "Aggregation and amplification of wind-turbine harmonic emission in a wind park." Power Delivery, IEEE Transactions on 30.2 (2015): 791-799. |
| [21] | Yang, Kai, Math HJ Bollen, and E. O. Larsson. "Wind power harmonic aggregation of multiple turbines in power bins." Harmonics and Quality of Power (ICHQP), 2014 IEEE 16th International Conference on. IEEE, 2014. |
| [22] | Mohammad Mahdi Share Pasand, “Harmonic Aggregation Techniques: Methods to Compensate for Interaction Effects.” American Journal of Electrical and Electronic Engineering, vol. 3, no. 3 (2015): 83-87. DOI: 10.12691/ajeee-3-3-4. |
APA Style
Mohammad Mahdi Share Pasand. (2015). Harmonic Aggregation Techniques. Journal of Electrical and Electronic Engineering, 3(5), 117-120. https://doi.org/10.11648/j.jeee.20150305.13
ACS Style
Mohammad Mahdi Share Pasand. Harmonic Aggregation Techniques. J. Electr. Electron. Eng. 2015, 3(5), 117-120. doi: 10.11648/j.jeee.20150305.13
AMA Style
Mohammad Mahdi Share Pasand. Harmonic Aggregation Techniques. J Electr Electron Eng. 2015;3(5):117-120. doi: 10.11648/j.jeee.20150305.13
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.jeee.20150305.13,
author = {Mohammad Mahdi Share Pasand},
title = {Harmonic Aggregation Techniques},
journal = {Journal of Electrical and Electronic Engineering},
volume = {3},
number = {5},
pages = {117-120},
doi = {10.11648/j.jeee.20150305.13},
url = {https://doi.org/10.11648/j.jeee.20150305.13},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20150305.13},
abstract = {Different harmonic aggregation techniques for assessment of current harmonic levels at points of measurement are investigated and compared to each other. The interaction effect in aggregation of harmonic currents is investigated. Several approaches including IEC 61000-3-6 recommended method are utilized and compared.},
year = {2015}
}
TY - JOUR T1 - Harmonic Aggregation Techniques AU - Mohammad Mahdi Share Pasand Y1 - 2015/09/12 PY - 2015 N1 - https://doi.org/10.11648/j.jeee.20150305.13 DO - 10.11648/j.jeee.20150305.13 T2 - Journal of Electrical and Electronic Engineering JF - Journal of Electrical and Electronic Engineering JO - Journal of Electrical and Electronic Engineering SP - 117 EP - 120 PB - Science Publishing Group SN - 2329-1605 UR - https://doi.org/10.11648/j.jeee.20150305.13 AB - Different harmonic aggregation techniques for assessment of current harmonic levels at points of measurement are investigated and compared to each other. The interaction effect in aggregation of harmonic currents is investigated. Several approaches including IEC 61000-3-6 recommended method are utilized and compared. VL - 3 IS - 5 ER -
Information
Email: