| Peer-Reviewed

Smart Inverter with Active Power Control and Reactive Power Compensation

Received: 26 November 2015    Accepted:     Published: 26 November 2015
Views:       Downloads:
Abstract

Conventional grid-tied single phase inverters of renewable power generators (solar PV systems typical) have limited reactive power compensation capability and do not have active power control. This paper presents a novel control strategy which provides active power control with reactive power compensation for a DC/AC inverter connected to a single-phase AC grid, which supplies electricity to local loads. By sampling the instantaneous current on the grid at the local load side, which represents the domestic load current, an orthogonal signal is constructed using second order generalised integrator. The active and reactive current of the local loads are then rapidly detached from the orthogonal signal through specific trigonometric calculation. The reference current for the inverter output are produced by combining the active current and the reactive current which is detached from the domestic load current. Comparing the reference current with the inverter output current generates the PWM signals which are used to control the IGBT devices of the inverter bridge with capacitive impedance output to achieve domestic reactive compensation for inductive loads. The output current remarkably improves the load capacity of the grid and reduces the demand of reactive power from the gerid.

Published in Journal of Electrical and Electronic Engineering (Volume 3, Issue 5)
DOI 10.11648/j.jeee.20150305.17
Page(s) 139-145
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Grid-Connected, Inverter, Active, Reactive, SOGI

References
[1] R. Majumder, “Reactive Power Compensation in Single-Phase Operation of Microgrid,” IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, vol. 60, no. 4, pp. 1403 - 1414, 2013.
[2] Enery Networks Association, “Engineering Recommendation G83,” Energy Nerworks Association, London, 2012.
[3] E. Moulin, “Measurring Reactive Power in Energy Meters,” Metering International, no. 1, pp. 52 - 54, 2002.
[4] M. Mithulananthan, C. A. Canizares, J. Reeeve and G. J. Rogers, “Comparison of PSS,SVC and STATCOM Controllers for Damping Power System Oscillations,” IEEE Trans. Power Systems, pp. 1-8, Octber 2002.
[5] M. Jaiswal, P. Kaur and P. Jaiswal, “Review and Analysis of Voltage Collapse in Power System,” International Journal of Scientific and Reasearch Publications, January 2012.
[6] A. Sode-Yome and N. Mithulananthan, “Comparison of shunt capacitor, SVC and STATCOM in static voltage stability margin enhancement,” International Journal of Electrical Engineering Education, vol. 41/2, no. 0020-7209, pp. 158-171, 2004.
[7] N. G. Hingorani, “Flexible AC Transmission Systems,” IEEE Spectrum, pp. 40-45, Apr. 1993.
[8] D. Murali, M. Rajaram and N. Reka, “Comparison of FACTS Devices for Power System Stability Enhancement,” International Journal of Computer Applications, pp. 30-35, October 2010.
[9] A. Ganesh, R. Dahiya and K. G. Singh, “A Novel Robust STATCOM Control Scheme for Stability Enhancement in Multimachine Power System,” ELEKTRONIKA IR ELEKTROTECHNIKA, pp. 22-28, 26 January 2014.
[10] T.-L. Lee, S.-H. Hu and Y.-H. Chan, “D-STATCOM with Positive-Sequence Admittance and Negtive-Sequence Conductance to Mitigate Voltage Fluctuations in High-Level Penetration of Distributed-Generation Systems,” IEEE TRANSCATION ON INDUSTRIAL ELECTRONICS, pp. 1417-1428, April 2013.
[11] S. Bolognani and S. Zampieri, “A Distributed Control Strategy for Reactive Power Compensation in Smart Microgrids,” Automatic Control, IEEE Transactions on, pp. 2818-2833, 20 June 2013.
[12] J. F. Rodriguez, E. Bueno, M. Aredes, B. L. Rolim, S. F. Neves and C. M. Cavalcanti, “Discrete-time implementation of second order generalised integrators for grid converters,” in Industrial Electronics,2008. IECON 2008. 34th Annual Conference of IEEE, Orlando, FL, 2008.
[13] S. Golestan, M. Monfared and J. M. Guerrero, “Second Order Generalized Integrator Based Reference Current Heneration Method for Single-Phase Shunt Active Power Filters Under Adverse Grid Conditions,” in Power Electronics, Drive Systems and Technologies Conference, Tehran, 2013.
[14] P. Rodriguez, A. Luna, I. Etxeberria, J. Hermoso and R. Teodorescu, “Multiple Second Order Generalized Integrators for Harmonic Synchronization of Power Converters,” in Energy Conversion Congress and Exposition, San Jose, CA, 2009.
[15] G. Fedele, “Non-adaptive Second-order generalized integrator for sinusoidal parameters estimation,” Electrical Power and Energy Systems, vol. 42, no. 0142-0615, pp. 314-320, November 2012.
Cite This Article
  • APA Style

    Zaiming Fan, Xiongwei Liu. (2015). Smart Inverter with Active Power Control and Reactive Power Compensation. Journal of Electrical and Electronic Engineering, 3(5), 139-145. https://doi.org/10.11648/j.jeee.20150305.17

    Copy | Download

    ACS Style

    Zaiming Fan; Xiongwei Liu. Smart Inverter with Active Power Control and Reactive Power Compensation. J. Electr. Electron. Eng. 2015, 3(5), 139-145. doi: 10.11648/j.jeee.20150305.17

    Copy | Download

    AMA Style

    Zaiming Fan, Xiongwei Liu. Smart Inverter with Active Power Control and Reactive Power Compensation. J Electr Electron Eng. 2015;3(5):139-145. doi: 10.11648/j.jeee.20150305.17

    Copy | Download

  • @article{10.11648/j.jeee.20150305.17,
      author = {Zaiming Fan and Xiongwei Liu},
      title = {Smart Inverter with Active Power Control and Reactive Power Compensation},
      journal = {Journal of Electrical and Electronic Engineering},
      volume = {3},
      number = {5},
      pages = {139-145},
      doi = {10.11648/j.jeee.20150305.17},
      url = {https://doi.org/10.11648/j.jeee.20150305.17},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20150305.17},
      abstract = {Conventional grid-tied single phase inverters of renewable power generators (solar PV systems typical) have limited reactive power compensation capability and do not have active power control. This paper presents a novel control strategy which provides active power control with reactive power compensation for a DC/AC inverter connected to a single-phase AC grid, which supplies electricity to local loads. By sampling the instantaneous current on the grid at the local load side, which represents the domestic load current, an orthogonal signal is constructed using second order generalised integrator. The active and reactive current of the local loads are then rapidly detached from the orthogonal signal through specific trigonometric calculation. The reference current for the inverter output are produced by combining the active current and the reactive current which is detached from the domestic load current. Comparing the reference current with the inverter output current generates the PWM signals which are used to control the IGBT devices of the inverter bridge with capacitive impedance output to achieve domestic reactive compensation for inductive loads. The output current remarkably improves the load capacity of the grid and reduces the demand of reactive power from the gerid.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Smart Inverter with Active Power Control and Reactive Power Compensation
    AU  - Zaiming Fan
    AU  - Xiongwei Liu
    Y1  - 2015/11/26
    PY  - 2015
    N1  - https://doi.org/10.11648/j.jeee.20150305.17
    DO  - 10.11648/j.jeee.20150305.17
    T2  - Journal of Electrical and Electronic Engineering
    JF  - Journal of Electrical and Electronic Engineering
    JO  - Journal of Electrical and Electronic Engineering
    SP  - 139
    EP  - 145
    PB  - Science Publishing Group
    SN  - 2329-1605
    UR  - https://doi.org/10.11648/j.jeee.20150305.17
    AB  - Conventional grid-tied single phase inverters of renewable power generators (solar PV systems typical) have limited reactive power compensation capability and do not have active power control. This paper presents a novel control strategy which provides active power control with reactive power compensation for a DC/AC inverter connected to a single-phase AC grid, which supplies electricity to local loads. By sampling the instantaneous current on the grid at the local load side, which represents the domestic load current, an orthogonal signal is constructed using second order generalised integrator. The active and reactive current of the local loads are then rapidly detached from the orthogonal signal through specific trigonometric calculation. The reference current for the inverter output are produced by combining the active current and the reactive current which is detached from the domestic load current. Comparing the reference current with the inverter output current generates the PWM signals which are used to control the IGBT devices of the inverter bridge with capacitive impedance output to achieve domestic reactive compensation for inductive loads. The output current remarkably improves the load capacity of the grid and reduces the demand of reactive power from the gerid.
    VL  - 3
    IS  - 5
    ER  - 

    Copy | Download

Author Information
  • Faculty of Health and Science, University of Cumbria, Lancaster, United Kingdom

  • Entrust, The Innovation Centre, Science Technology Daresbury, Cheshire, United Kingdom

  • Sections