Research on the Influence of Load Characteristics of Distributed Power Grid on Electric Energy Metering
Journal of Electrical and Electronic Engineering
Volume 6, Issue 3, June 2018, Pages: 94-103
Received: Jul. 6, 2018;
Accepted: Aug. 15, 2018;
Published: Sep. 15, 2018
Views 994 Downloads 213
Li Pengcheng, Guizhou Power Grid Co., Ltd., Guiyang, China
Zhao Yantao, Wasion Group Co., Ltd., Changsha, China
Cong Zhongxiao, Guizhou Power Grid Co., Ltd., Guiyang, China
Zhao Yunbin, Guizhou Power Grid Co., Ltd., Guiyang, China
Xu Hongwei, Guizhou Power Grid Co., Ltd., Guiyang, China
Su Yuhua, Wasion Group Co., Ltd., Changsha, China
Follow on us
As a large number of Distributed Generation Connecting Electric Grid put into operation, there are many impacts on power metering of power grid due to the problems of large fluctuation of load and frequent reverse of power, injecting DC component and harmonic component into power grid, generating voltage deviation, voltage fluctuation and flicker, and voltage unbalance. Measurement accuracy of traditional metering devices is difficult to guarantee. Therefore, the adaptability of traditional metering devices in the distributed power grid environment and the improvement of new technical methods to the Distributed Generation Connecting Electric Grid need to be studied. In this paper, through the analysis of the field operation data, it is proposed that the load fluctuation and frequent reverse of power can be solved by using the bidirectional and wide-range metering gateway meter; by analyzing the influence of the secondary transformer on the DC component, it is proposed that the influence of the DC component on the power metering can be almost ignored under the 0.5% DC component injection of the Distributed Generation Connecting Electric Grid. By analyzing zero flux technology, phase matching technology and high frequency sampling technology, a method to solve the problem of synchronous sampling of voltage and current under the influence of harmonics is proposed. By analyzing the point product and harmonic algorithm, the sampling rate requirement of accurate measurement of electric energy is proposed. A series of reasonable technical means and requirements are put forward in this paper, which greatly improves the power metering problem under the Distributed Generation Connecting Electric Grid.
Distributed Power, Wide Range, DC Component, Harmonics, Power Factor, Energy Metering
To cite this article
Research on the Influence of Load Characteristics of Distributed Power Grid on Electric Energy Metering, Journal of Electrical and Electronic Engineering.
Vol. 6, No. 3,
2018, pp. 94-103.
Copyright © 2018 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Si-Hun Jo, SeoEun Son, and Jung-Wook Park, “On improving distortion power quality index in distributed power grids,” IEEE Trans. Smart Grid, vol. 4, no. 1, pp. 586–595, Mar. 2013.
Tao Zhou and Bruno François, “Energy management and power control of a hybrid active wind generator for distributed power generation and grid integration” IEEE Trans. Ind. Electron., vol. 58, no. 1, pp. 95–104, Jan. 2011.
KANG Chenggong, LI Xianwei, ZHANG Guojun. Research on power quality control strategy incorporating distributed generation. Power System Protection and Control. 2016, 44 (16):99-105.
V. F. Corasaniti, M. B. Barbieri, P. L. Arnera, and M. I. Valla, “Hybrid active filter for reactive and harmonics compensation in a distribution networks,” IEEE Trans. Ind. Electron., vol. 56, no. 3, pp. 670–677, Mar. 2009.
M. Prodanovic and T. C. Green, “High-quality power generation through distributed control of a power parkmicrogrid,” IEEE Trans. Ind. Electron., vol. 53, no. 5, pp. 1427–1436, Oct. 2006.
Peng Cheng. Research and design of bidirectional power measurement and harmonic detection system based on DSP. Guangxi University, 2017.
Wang Mengwei, Yan Yang. Analysis of bidirectional power energy measurement for distributed generation [J]. Electrotechnics Electric, 2013, (5): 15-17, 22.
Zhao Kangshen, Wang Qingzhang, Guo Tianyong, et al. FPGA-based power flow analysis of photovoltaic grid-connected power generation system and the research of dual power measurement [J]. Acta Scientiarum Naturalium Universitatis Nankaiensis. 2009, 42 (3): 22-28.
Tao Weiqing, Li Jiaxi, Ding Ming, Wang Leqin, Gu Zhixia. Development and Comparison on Standard for Interconnecting Distributed Resources with Electric Power Systems. JOURNAL OF ELECTRICAL ENGINEERING. 2016, 11 (4):1-8.
Q/GDW 666-2011. Test technical specification for distributed resources connected to distribution network [S].
Bao Wei, Hu Xuehao, He Guoqing, et al. Study on standard for grid-integration of distributed resources [J]. Power System Technology, 2012, 36 (11): 46-52.
Fu Xueqian, Chen Haoyong, Liu Guote, et al. Power quality comprehensive evaluation method for distributed generation [J]. Proceedings of the CSEE, 2014, 34 (25): 4270-4276.
Q/GDW480-2010. Technical rule for distributed resources connected to power grid [S].
Tian Xiaoqian. Research on Current Transformer and Energy Metering Affected by DC Bias [D]. Baoding: North China Electric Power University, 2014.
Tan Bingyuan, Lu Jiping, Jiangbo et al. Analysis on Performance of Current Transformer Affected by DC Bias [J]. Power grid technology, 2014, 38 (5): 1408-1413.
Wang Huan, Mao Anlan, Wang Quan, et al. Research on the error characteristics of measurement for CT under DC magnetic bias [J]. Process Automation Instrumentation, 2014, 35 (6): 47-53.
Wei Gang, Wu Weili, Hu Danyun, et al. Distributed generation and effects of its parallel operation on power system [J]. High Voltage Engineering, 2007, 33 (1): 36-40.
Yao Li. The method of electric energy measurement under the influence of harmonics [J]. Electrical Measurement & Instrumentation, 2005, 42 (10): 20-23, 10.