The conventional sources of energy are limited which are unable to meet the demand. There is always need of generation of electrical energy worldwide, may be in terms of few kilowatts to hundreds of kilowatts. The power requirement at the domestic level is terms of few kilowatts so there should be a way to meet the electrical demand at domestic level during load shading or fault. A subtitle to this could be a Voltage controlled voltage source inverters (VCVSIs). Now a day, such inverters are widely used in many applications like power supplies, power quality controllers, renewable energy, marine and military to meet the demand. Wherever an ac supply is need from a DC source, such inverters may be used. They are the heart and soul of converting DC into an ac source. Hence, such inverters should be designed so that they are robust and efficient. Inverter models can be design and simulated with software like Matlab Simulink to check suitability of inverter before implementing the hardware. Loads at the domestic level may be linear or non- linear hence a simple approach to design a voltage source inverter using open loop is presented in this paper.
| Published in |
Journal of Electrical and Electronic Engineering (Volume 3, Issue 1-1)
This article belongs to the Special Issue Sustainable and Renewable Energies and Systems |
| DOI | 10.11648/j.jeee.s.2015030101.12 |
| Page(s) | 13-21 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Voltage Controlled Voltage Source Inverters, MOSFET, Thyristors, Open-Loop Control System
| [1] | N. Mohan, T. M. Undeland, and W. P. Robbins, Power Electronics - Converters, Applications, and Design, 2nd ed: John Wiley & Sons, Inc., 1995. |
| [2] | "Matlab 6, Release 12.1." Natick, Massachusetts: The MathWorks (www.mathworks.com), 2006. "PSIM Version 7.0." Woburn, MA: Powersim Inc. (www.powersimtech.com), 2006. |
| [3] | M. Trigg, "Digital Sinusoidal PWM Generation using a Low-cost Micro-controller Based Single-Phase Inverter," presented at ETFA 2005, Catania, Italy, 2005. |
| [4] | M. C. Trigg, H. Dehbonei, and C. V. Nayar, "Digital Sinusoidal PWMs for a Microcontroller based Single-Phase Inverter. Part 1: Principles of digital sinusoidal PWM generation," IJE Power electronics and instrumentation hardware, 2005. |
| [5] | H. Dehbonei, M. C. Trigg, and C. Nayar, "A Novel Sinewave Inverter for Harsh Environment," presented at AUPEC 2005, Hobart, Tasmania, Australia, 2005. |
| [6] | M. H. Rashid,” Power Electronics circuits, devices, and applications ”, Pearson Education India, 3rd Edition 2004. |
APA Style
Akhilesh Sharma, Neeraj Kumar, Gunjan Gupta. (2014). Open-Loop Voltage Control Voltage Source Inverter for a Linear Load & Non-Linear Load. Journal of Electrical and Electronic Engineering, 3(1-1), 13-21. https://doi.org/10.11648/j.jeee.s.2015030101.12
ACS Style
Akhilesh Sharma; Neeraj Kumar; Gunjan Gupta. Open-Loop Voltage Control Voltage Source Inverter for a Linear Load & Non-Linear Load. J. Electr. Electron. Eng. 2014, 3(1-1), 13-21. doi: 10.11648/j.jeee.s.2015030101.12
AMA Style
Akhilesh Sharma, Neeraj Kumar, Gunjan Gupta. Open-Loop Voltage Control Voltage Source Inverter for a Linear Load & Non-Linear Load. J Electr Electron Eng. 2014;3(1-1):13-21. doi: 10.11648/j.jeee.s.2015030101.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.jeee.s.2015030101.12,
author = {Akhilesh Sharma and Neeraj Kumar and Gunjan Gupta},
title = {Open-Loop Voltage Control Voltage Source Inverter for a Linear Load & Non-Linear Load},
journal = {Journal of Electrical and Electronic Engineering},
volume = {3},
number = {1-1},
pages = {13-21},
doi = {10.11648/j.jeee.s.2015030101.12},
url = {https://doi.org/10.11648/j.jeee.s.2015030101.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.s.2015030101.12},
abstract = {The conventional sources of energy are limited which are unable to meet the demand. There is always need of generation of electrical energy worldwide, may be in terms of few kilowatts to hundreds of kilowatts. The power requirement at the domestic level is terms of few kilowatts so there should be a way to meet the electrical demand at domestic level during load shading or fault. A subtitle to this could be a Voltage controlled voltage source inverters (VCVSIs). Now a day, such inverters are widely used in many applications like power supplies, power quality controllers, renewable energy, marine and military to meet the demand. Wherever an ac supply is need from a DC source, such inverters may be used. They are the heart and soul of converting DC into an ac source. Hence, such inverters should be designed so that they are robust and efficient. Inverter models can be design and simulated with software like Matlab Simulink to check suitability of inverter before implementing the hardware. Loads at the domestic level may be linear or non- linear hence a simple approach to design a voltage source inverter using open loop is presented in this paper.},
year = {2014}
}
TY - JOUR T1 - Open-Loop Voltage Control Voltage Source Inverter for a Linear Load & Non-Linear Load AU - Akhilesh Sharma AU - Neeraj Kumar AU - Gunjan Gupta Y1 - 2014/10/17 PY - 2014 N1 - https://doi.org/10.11648/j.jeee.s.2015030101.12 DO - 10.11648/j.jeee.s.2015030101.12 T2 - Journal of Electrical and Electronic Engineering JF - Journal of Electrical and Electronic Engineering JO - Journal of Electrical and Electronic Engineering SP - 13 EP - 21 PB - Science Publishing Group SN - 2329-1605 UR - https://doi.org/10.11648/j.jeee.s.2015030101.12 AB - The conventional sources of energy are limited which are unable to meet the demand. There is always need of generation of electrical energy worldwide, may be in terms of few kilowatts to hundreds of kilowatts. The power requirement at the domestic level is terms of few kilowatts so there should be a way to meet the electrical demand at domestic level during load shading or fault. A subtitle to this could be a Voltage controlled voltage source inverters (VCVSIs). Now a day, such inverters are widely used in many applications like power supplies, power quality controllers, renewable energy, marine and military to meet the demand. Wherever an ac supply is need from a DC source, such inverters may be used. They are the heart and soul of converting DC into an ac source. Hence, such inverters should be designed so that they are robust and efficient. Inverter models can be design and simulated with software like Matlab Simulink to check suitability of inverter before implementing the hardware. Loads at the domestic level may be linear or non- linear hence a simple approach to design a voltage source inverter using open loop is presented in this paper. VL - 3 IS - 1-1 ER -
Information
Email: