Thickness Simulation and Analysis of CdS/CdTe Solar Cell to Increase the Efficiency and Decrease the Toxicant Material of Cadmium
Journal of Electrical and Electronic Engineering
Volume 3, Issue 2-1, March 2015, Pages: 107-110
Received: Nov. 18, 2016;
Accepted: Nov. 21, 2016;
Published: Dec. 8, 2016
Views 4196 Downloads 207
Amirhasan Behrouzi, Department of Electronic Engineering, Khorasan-e-Razavi Science and Research Branch, Islamic Azad University, Neyshabur, Iran
Seyyed Reza Talebiyan, Department of Electronic Engineering, Khorasan-e-Razavi Science and Research Branch, Islamic Azad University, Neyshabur, Iran; Department of Electronic Engineering, Imam Reza International University, Mashhad, Iran
Population growth as well as the growth in energy demand is one of the most challenging problems in the world. Therefore, there is great need of green energy technologies and one of the green energy resources is solar cell that converts sun rays in a photovoltaic way into electrical energy. Firstly, we have presented a structure and after simulating this structure and reaching to approximately close results we expect any improvement in simulated model can be accessible in manufactured model. In this article, synchronous analysis of layer thickness for reaching to the maximum efficiency has been done. Our analysis performs to maximize the efficiency and minimize the thickness of layers with toxicant and expensive cd material. The results, shows increase of the efficiency and extreme decreasing in Cd layers thickness.
Seyyed Reza Talebiyan,
Thickness Simulation and Analysis of CdS/CdTe Solar Cell to Increase the Efficiency and Decrease the Toxicant Material of Cadmium, Journal of Electrical and Electronic Engineering. Special Issue: Research and Practices in Electrical and Electronic Engineering in Developing Countries.
Vol. 3, No. 2-1,
2015, pp. 107-110.
Copyright © 2015 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
http:// www. Renewableener gyworld. Com/ rea/ news/ article/ 2011/01/ how- thin- film- solar- will- farc- against- crystalline- silicons- shallenge.
S. Khosroabadi, and S. H. Keshmiri, “Design of a high efficiency ultrathin CdS/CdTe solar cell using back surface field and backside distributed Bragg reflector,” Opt. Express. 22, A921-A929 (2014).
N. Amin, K. Sopianb, and M. Konagai, “Numerical modeling of CdS/CdTe and CdS/CdTe/ZnTe solar cells as a function of CdTe thickness,” Sol. Energ. Mat. Sol. C. 91(13), 1202–1208 (2007).
L. V. Krishnakumar, J. Han, A. Klein, and W. Jaegermann, “CdTe thin film solar cells with reduced CdS film thickness,” Thin Solid Films 519(7), 7138–7141 (2011).
M. A. Green, K. Emery, Y. Hishikawa, W. Warta, and E. D. Dunlop, “Solar cell efficiency tables (Version38),” Prog. Photovoltaics Res. Appl. 19(5), 84–92 (2011).
E. Colegrove, R. Banai, C. Blissett, C. Buurma, J. Ellsworth, M. Morley, S. Barnes, et al., “High-Efficiency Polycrystalline CdS/CdTe Solar Cells on Buffered Commercial TCO-Coated Glass,” J. Electron. Mater. 41(10), 2833–2837 (2012).
http:// www. Firstsolar. Com/ en/ Innovation/ Advanced – Thin- film- Modules, 2014.
I. P. Lemmon, E. Polikarpov, W. D. Bennett, and L. Kovarik, ""Thin metal oxide films to modify a window layer in CdTe- Based solar cells For improved performancc,""Applied physics letter, vol, 100-, pp, 1-4, 2012.
T. Aramoto, S. Kumazawa, H. Higuchi, T. Arita, S. Shibutani, T. Nishio, et al., ""16.0 Efficient Thin-Film CdS/CdTe Solar Cells,"" Jpn. J. Appl. Phys, vol. 36, pp 1997. 6304-6305.
S. Khosroabadi, and S. H. Keshmiri Design of a high efficiency CdS/CdTe solar cell with optimized step doping, film thickness, and carrier lifetime of the absorption layer. J. Europ. Opt. Soc. Rap. Public. 9, 14052 2014.
T. A. Gessert A. Dude, S. Ashaer, C. Narayanswamy, and D. Rose, in Proc.28th IEEE Photovoltaic Specialist Conf 654-657, 2000.