Design of Coplanar Dipole Antenna with Inverted-H Slot for 0.9/1.575/2.0/2.4/2.45/5.0 GHz Applications

Yuh-Yih Lu; Enfu Lin

doi:doi:10.11648/j.jeee.20170502.13

| Peer-Reviewed

Design of Coplanar Dipole Antenna with Inverted-H Slot for 0.9/1.575/2.0/2.4/2.45/5.0 GHz Applications

Yuh-Yih Lu, Enfu Lin

Published in Journal of Electrical and Electronic Engineering (Volume 5, Issue 2)

Received: 5 April 2017 Accepted: Published: 6 April 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

A coplanar symmetric dipole slot antenna with inverted-H slot is proposed for 0.9/1.575/2.0/2.4/2.45/5.0 GHz wireless communication applications. The inverted-H slot is etched on the metallic layer of a single sided printed circuit board to form the coplanar dipole slot antenna. The dimensions of inverted-H slot are changed to design and fabricate the antenna which can be operated at 0.9/1.575/2.0/2.4/2.45/5.0 GHz successfully. We use IE3D software to design this dipole slot antenna and choose the better parameters to manufacture the proposed antenna. The influences of slot dimension parameters of the proposed antenna on resonant frequency, input reflection coefficient expressed in decibel and impedance bandwidth are described. The proposed antenna with the volume of 123mm×31mm×1.6mm has been fabricated. The measured result shows that the proposed antenna can be successfully operated at 0.9/1.575/2.0/2.4/2.45/5.0 GHz.

Published in	Journal of Electrical and Electronic Engineering (Volume 5, Issue 2)
DOI	10.11648/j.jeee.20170502.13
Page(s)	38-47
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Coplanar, Dipole Antenna, Inverted-H, Slot

References

[1]	Wong, K. L., Planar Antennas for Wireless Communications, Hoboken, NJ: Wiley, 2003.
[2]	R. K. Raj, M. Joseph, B. Paul, and P. Mohanan, “Compact planar multiband antenna for GPS, DCS, 2.4/5.8 GHz WLAN applications” Electronics Letters, vol. 41, 2005, pp. 33-34.
[3]	RongLin Li, Bo Pan, Joy Laskar, and Manos M. Tentzeris, “A compact broadband planar antenna for GPS, DCS-1800, IMT-2000, and WLAN applications,” IEEE Antennas Wireless Propag. Lett., vol. 6, 2007, pp.25-27.
[4]	Y. Y. Lu, S. C. Wei, and H. C. Huang, “Design of RFID antenna for 2.45GHz applications,” Int'l Conf. on Innovative Comp., Information and Control, 2009, pp. 601-604.
[5]	H. R. Lee and J. M. Woo, “Asymmetric planar dipole antenna on the surface of conducting plane for RFID tag,” Asia Pacific Microwave Conf., 2009, pp.633-636.
[6]	J. EL Aoufi, N. Alaoui, M. Essaaidi, M. Benayad, “ Design of a low cost planar antenna for 2.45 GHz RFID applications,” European Journal of Scientific Research, vol. 61, 2011, pp. 42–48.
[7]	Y. L. Kuo and K. L. Wong, “Printed double-T monopole antenna for 2.4/5.2 GHz dual band WLAN operations,” IEEE Trans. Antennas Propag., vol. 51, 2003, pp. 2187–2192.
[8]	Y. Y. Lu, S. C. Dai, and H. C. Huang, “Design of triple-band planar antenna for LTE/WLAN applications,” Int'l Conf. on Intell. Inform. Hiding and Multimedia Signal Proc., 2015, pp.1–4.
[9]	C. M. Wu, C. N. Chiu, and C. K. Hsu, “A new nonuniform meandered and fork-type grounded antenna for triple-band WLAN applications,” IEEE Antennas Wireless Propag. Lett., vol. 5, 2006, pp.346-348.
[10]	J. Y. Sze, K. L. Wong, “Bandwidth enhancement of a microstrip-line-fed printed wide-slot antenna,” IEEE Trans. Antennas Propag., vol. 49, 2001, pp. 1020-1024.
[11]	S. W. Qu, C. Ruan, and B. Z. Wang, “Bandwidth enhancement of wide-slot antenna fed by CPW and microstrip line,” IEEE Antennas Wireless Propag. Lett., vol. 5, 2006, pp. 15–17.
[12]	C. M. Wu, C. N. Chiu, C. K. Hsu, “A new nonuniform meandered and fork-type grounded antenna for triple-band WLAN applications,” IEEE Antennas and Wireless Propag. Lett., vol. 5, 2006, pp. 346–348.
[13]	P. Xu, Z. H. Yan, C. Wang, “Multi-band modified fork-shaped monopole antenna with dual L-shaped parasitic plane,” Electronics Letters, vol. 47, 2011, pp. 364–365.
[14]	Y. Y. Lu, J. Y. Kuo, H. C. Huang, “Design and application of triple-band planar dipole antennas,” Journal of Information Hiding and Multimedia Signal Processing, vol.6, 2015, pp. 792-805.

Cite This Article

Plain Text BibTeX RIS

APA Style

Yuh-Yih Lu, Enfu Lin. (2017). Design of Coplanar Dipole Antenna with Inverted-H Slot for 0.9/1.575/2.0/2.4/2.45/5.0 GHz Applications. Journal of Electrical and Electronic Engineering, 5(2), 38-47. https://doi.org/10.11648/j.jeee.20170502.13

Copy | Download

ACS Style

Yuh-Yih Lu; Enfu Lin. Design of Coplanar Dipole Antenna with Inverted-H Slot for 0.9/1.575/2.0/2.4/2.45/5.0 GHz Applications. J. Electr. Electron. Eng. 2017, 5(2), 38-47. doi: 10.11648/j.jeee.20170502.13

Copy | Download

AMA Style

Yuh-Yih Lu, Enfu Lin. Design of Coplanar Dipole Antenna with Inverted-H Slot for 0.9/1.575/2.0/2.4/2.45/5.0 GHz Applications. J Electr Electron Eng. 2017;5(2):38-47. doi: 10.11648/j.jeee.20170502.13

Copy | Download

@article{10.11648/j.jeee.20170502.13,
  author = {Yuh-Yih Lu and Enfu Lin},
  title = {Design of Coplanar Dipole Antenna with Inverted-H Slot for 0.9/1.575/2.0/2.4/2.45/5.0 GHz Applications},
  journal = {Journal of Electrical and Electronic Engineering},
  volume = {5},
  number = {2},
  pages = {38-47},
  doi = {10.11648/j.jeee.20170502.13},
  url = {https://doi.org/10.11648/j.jeee.20170502.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20170502.13},
  abstract = {A coplanar symmetric dipole slot antenna with inverted-H slot is proposed for 0.9/1.575/2.0/2.4/2.45/5.0 GHz wireless communication applications. The inverted-H slot is etched on the metallic layer of a single sided printed circuit board to form the coplanar dipole slot antenna. The dimensions of inverted-H slot are changed to design and fabricate the antenna which can be operated at 0.9/1.575/2.0/2.4/2.45/5.0 GHz successfully. We use IE3D software to design this dipole slot antenna and choose the better parameters to manufacture the proposed antenna. The influences of slot dimension parameters of the proposed antenna on resonant frequency, input reflection coefficient expressed in decibel and impedance bandwidth are described. The proposed antenna with the volume of 123mm×31mm×1.6mm has been fabricated. The measured result shows that the proposed antenna can be successfully operated at 0.9/1.575/2.0/2.4/2.45/5.0 GHz.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Design of Coplanar Dipole Antenna with Inverted-H Slot for 0.9/1.575/2.0/2.4/2.45/5.0 GHz Applications
AU  - Yuh-Yih Lu
AU  - Enfu Lin
Y1  - 2017/04/06
PY  - 2017
N1  - https://doi.org/10.11648/j.jeee.20170502.13
DO  - 10.11648/j.jeee.20170502.13
T2  - Journal of Electrical and Electronic Engineering
JF  - Journal of Electrical and Electronic Engineering
JO  - Journal of Electrical and Electronic Engineering
SP  - 38
EP  - 47
PB  - Science Publishing Group
SN  - 2329-1605
UR  - https://doi.org/10.11648/j.jeee.20170502.13
AB  - A coplanar symmetric dipole slot antenna with inverted-H slot is proposed for 0.9/1.575/2.0/2.4/2.45/5.0 GHz wireless communication applications. The inverted-H slot is etched on the metallic layer of a single sided printed circuit board to form the coplanar dipole slot antenna. The dimensions of inverted-H slot are changed to design and fabricate the antenna which can be operated at 0.9/1.575/2.0/2.4/2.45/5.0 GHz successfully. We use IE3D software to design this dipole slot antenna and choose the better parameters to manufacture the proposed antenna. The influences of slot dimension parameters of the proposed antenna on resonant frequency, input reflection coefficient expressed in decibel and impedance bandwidth are described. The proposed antenna with the volume of 123mm×31mm×1.6mm has been fabricated. The measured result shows that the proposed antenna can be successfully operated at 0.9/1.575/2.0/2.4/2.45/5.0 GHz.
VL  - 5
IS  - 2
ER  -

Copy | Download

Author Information

Yuh-Yih Lu

Department of Electrical Engineering, Minghsin University of Science and Technology, Hsinchu, Taiwan
Enfu Lin

Department of Electrical Engineering, Minghsin University of Science and Technology, Hsinchu, Taiwan

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Yuh-Yih Lu, Enfu Lin. (2017). Design of Coplanar Dipole Antenna with Inverted-H Slot for 0.9/1.575/2.0/2.4/2.45/5.0 GHz Applications. Journal of Electrical and Electronic Engineering, 5(2), 38-47. https://doi.org/10.11648/j.jeee.20170502.13

Copy | Download

ACS Style

Yuh-Yih Lu; Enfu Lin. Design of Coplanar Dipole Antenna with Inverted-H Slot for 0.9/1.575/2.0/2.4/2.45/5.0 GHz Applications. J. Electr. Electron. Eng. 2017, 5(2), 38-47. doi: 10.11648/j.jeee.20170502.13

Copy | Download

AMA Style

Yuh-Yih Lu, Enfu Lin. Design of Coplanar Dipole Antenna with Inverted-H Slot for 0.9/1.575/2.0/2.4/2.45/5.0 GHz Applications. J Electr Electron Eng. 2017;5(2):38-47. doi: 10.11648/j.jeee.20170502.13

Copy | Download

@article{10.11648/j.jeee.20170502.13,
  author = {Yuh-Yih Lu and Enfu Lin},
  title = {Design of Coplanar Dipole Antenna with Inverted-H Slot for 0.9/1.575/2.0/2.4/2.45/5.0 GHz Applications},
  journal = {Journal of Electrical and Electronic Engineering},
  volume = {5},
  number = {2},
  pages = {38-47},
  doi = {10.11648/j.jeee.20170502.13},
  url = {https://doi.org/10.11648/j.jeee.20170502.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20170502.13},
  abstract = {A coplanar symmetric dipole slot antenna with inverted-H slot is proposed for 0.9/1.575/2.0/2.4/2.45/5.0 GHz wireless communication applications. The inverted-H slot is etched on the metallic layer of a single sided printed circuit board to form the coplanar dipole slot antenna. The dimensions of inverted-H slot are changed to design and fabricate the antenna which can be operated at 0.9/1.575/2.0/2.4/2.45/5.0 GHz successfully. We use IE3D software to design this dipole slot antenna and choose the better parameters to manufacture the proposed antenna. The influences of slot dimension parameters of the proposed antenna on resonant frequency, input reflection coefficient expressed in decibel and impedance bandwidth are described. The proposed antenna with the volume of 123mm×31mm×1.6mm has been fabricated. The measured result shows that the proposed antenna can be successfully operated at 0.9/1.575/2.0/2.4/2.45/5.0 GHz.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Design of Coplanar Dipole Antenna with Inverted-H Slot for 0.9/1.575/2.0/2.4/2.45/5.0 GHz Applications
AU  - Yuh-Yih Lu
AU  - Enfu Lin
Y1  - 2017/04/06
PY  - 2017
N1  - https://doi.org/10.11648/j.jeee.20170502.13
DO  - 10.11648/j.jeee.20170502.13
T2  - Journal of Electrical and Electronic Engineering
JF  - Journal of Electrical and Electronic Engineering
JO  - Journal of Electrical and Electronic Engineering
SP  - 38
EP  - 47
PB  - Science Publishing Group
SN  - 2329-1605
UR  - https://doi.org/10.11648/j.jeee.20170502.13
AB  - A coplanar symmetric dipole slot antenna with inverted-H slot is proposed for 0.9/1.575/2.0/2.4/2.45/5.0 GHz wireless communication applications. The inverted-H slot is etched on the metallic layer of a single sided printed circuit board to form the coplanar dipole slot antenna. The dimensions of inverted-H slot are changed to design and fabricate the antenna which can be operated at 0.9/1.575/2.0/2.4/2.45/5.0 GHz successfully. We use IE3D software to design this dipole slot antenna and choose the better parameters to manufacture the proposed antenna. The influences of slot dimension parameters of the proposed antenna on resonant frequency, input reflection coefficient expressed in decibel and impedance bandwidth are described. The proposed antenna with the volume of 123mm×31mm×1.6mm has been fabricated. The measured result shows that the proposed antenna can be successfully operated at 0.9/1.575/2.0/2.4/2.45/5.0 GHz.
VL  - 5
IS  - 2
ER  -

Copy | Download