Hydrodynamic Study Using CFD Simulations in a Horizontal Two-Phase Flow Through Sudden Contraction

Ibtissem Belgacem; Y. Salhi; E-K. Si-Ahmed

doi:doi:10.11648/j.ajmie.20170201.12

| Peer-Reviewed

Hydrodynamic Study Using CFD Simulations in a Horizontal Two-Phase Flow Through Sudden Contraction

Ibtissem Belgacem, Y. Salhi, E-K. Si-Ahmed

Published in American Journal of Mechanical and Industrial Engineering (Volume 2, Issue 1)

Received: 31 October 2016 Accepted: 29 November 2016 Published: 26 December 2016

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Two-phase flows are encountered in a wide range of industrial application. In the present work, two-phase computational fluid dynamics (CFD) calculations, using Eulerian–Eulerian model and commercial CFD package FLUENT 6.3, were employed to calculate pressure drops caused by abrupt flow area contraction in small circular pipes for two-phase flow of air and water mixtures at room temperature and near atmospheric pressure. The pressure drop is determined by extrapolating the computed pressure profiles upstream and downstream of the contraction. Variables studied include: gas and liquid velocities, and pipe contraction ratio. The numerical results were validated against experimental data from the literature and are found to be in good agreement. Our findings could be useful in designing pipeline.

Published in	American Journal of Mechanical and Industrial Engineering (Volume 2, Issue 1)
DOI	10.11648/j.ajmie.20170201.12
Page(s)	8-16
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Two Phase Flow, Pressure Drop, CFD, VOF, Theoretical Models

References

[1]	Ferguson, M. E. G., and Spedding, P. L., 1995. Measurement and prediction of pressure drop in two-phase flow, J. Chem. Tech. Biotechnol, 62, 262-278.
[2]	Coleman, J. W. 2010. An experimentally validated model for two-phase sudden contraction pressure drop in microchannel tube headers. Heat transfer engineering. 25 (3), 69-77.
[3]	Geiger, G. E., 1964. Sudden contraction losses in single and two –phase flow. Ph.D Thesis, University of Pittsburgh, USA.
[4]	McGee, J. W., 1966. Two–phase flow through abrupt expansions and contractions. Ph.D Thesis, University of North Carolina at Raleigh, UAS.
[5]	Hewitt, G. F., Shires, G. L., and Bott, T. R., Process HeatTransfer, CRC Press, Boca Raton, 1994
[6]	Chisholm, D. Two-phase flow in pipelines and heat exchangers. George Godwin. London. 1983. p, 304.
[7]	Abdelall, E. F., Halim, G., Ghiaasiaan, S. M., Abdel-Khalik, S. I., Jeter, S. S., Yoda, M., Sadowski, D. L. 2005. Pressure drop caused by abrupt flow area changes in small channels. Exp. Thermal Fluid Sci. 29, 425-434.
[8]	Chalfi, T. Y., Ghiaasiaan, S. M., 2008. Pressure drop caused by flow area changes in capillaries under low flow conditions. Int. J. Multiphase flow, 34, 2-12.
[9]	Schmidt, J., Friedel, L., 1997. Two–phase flow pressure drop across sudden contractions in duct areas. Int. J. Multiphase flow 23.2, 283-299.
[10]	Chen, I. Y., Tseng, C. Y., Lin, Y. T., Wang, C.2008. Two-phase flow pressure change subject to sudden contraction in small rectangular channels. Int. J. Multiphase flow, 35, 297-306.
[11]	Padilla, M., Revellin, R., & Bonjour, J. 2013. Two-phase flow of HFO-1234yf, R-134a and R-410A in sudden contractions: Visualization, pressure drop measurements and new prediction method. Experimental Thermal and Fluid Science.
[12]	Vallé, C., Lucas, D., Beyer, M., Pietruske, H., Schutz, P., Carl, H., 2010. Experimental CFD grade data for stratified two-phase flows. Nuclear Engineering and design 240, 2347-2356.
[13]	Vallée, C., Hohne, T, Prasser, H. M., Suhnel, T., 2008. Experimental investigation and CFD simulation of horizontal stratified two-phase flow phenomena. Nuclear Engineering and design 238, 637-646.
[14]	Dhotre, M. T and Joshi, J. B., 2004. Two –dimensional CFD model for the prediction of flow pattern, pressure drop and heat transfert coefficient in bubble column reactors. Chemical engineering research and design. 82 (A6), 689-707.
[15]	Ratkovich, N., Chan, C. C. V., Berube, P. R., Nopens, I. 2009. Experimental study and CFD modeling of a two-phase slug flow for an airlift tubular membrane.
[16]	Manmatha, K. R., Sukanta. K. D. 2011. Two-phase pressure drop caused by flow area contraction/expansion in small circular pipes. International journal for numerical methods in fluids. 66, 1420-1446.
[17]	Kaushik, V. V. R, Ghosh, S, Gargi, D, Prasanta, K. D. 2012. CFD simulation of core annular flow through sudden contraction and expansion. Journal of petroleum science and engineering. 86-87, 153-164.
[18]	Balakhisna, T, T., Ghosh, S., Das, P. K, 2010. Oil-water flows through sudden contraction and expansion in a horizontal pipe- phase distribution and pressure drop. Int. J. Multiphase flow. 36, 13-24.
[19]	Ghorai, S., Nigam, K. D. P. (2006). CFD modeling of flow profiles and interfacial phenomena in two-phase flow in pipes, Chemical engineering and processing journal, 45 (1), 55-65.
[20]	Hirt, C. W., and Nichols, B. D. (1981). Volume of fluid (VOF) method for the dynamics of free boundaries. Journal of computational physics, 39 (1), 201-225.
[21]	Launder, B. E, Reece, G. J. and Rodi, W. 1975. Progress in the development of a Reynolds-Stress Turbulent closure. Journal of fluid Mechanics, 68 (3), 537-566.
[22]	Issa, R. I., 1986. Solution of implicitly discretized fluid flow equations by operator splitting. J. Comput. Phys. 62, 40-65.
[23]	Kays, W. M. 1950. Loss coefficients for abrupt drops in flow cross section with low Reynolds number flow in single and multiple-tube systems. Trans. ASME 73, 1063-1074.
[24]	Zivi, S. M. Estimation of steady state steam void-fraction by means of principle of minimum entropy production. ASME Trans Series C, 1964, (86): 237-252.
[25]	Belgacem, I. (2015). Contributions à l’étude de l’écoulement diphasique gaz-liquide co-courant en milieu confiné dans une conduite horizontale avec ou sans singularité. Thèse de Doctorat, U.S.T.H.B.

Cite This Article

Plain Text BibTeX RIS

APA Style

Ibtissem Belgacem, Y. Salhi, E-K. Si-Ahmed. (2016). Hydrodynamic Study Using CFD Simulations in a Horizontal Two-Phase Flow Through Sudden Contraction. American Journal of Mechanical and Industrial Engineering, 2(1), 8-16. https://doi.org/10.11648/j.ajmie.20170201.12

Copy | Download

ACS Style

Ibtissem Belgacem; Y. Salhi; E-K. Si-Ahmed. Hydrodynamic Study Using CFD Simulations in a Horizontal Two-Phase Flow Through Sudden Contraction. Am. J. Mech. Ind. Eng. 2016, 2(1), 8-16. doi: 10.11648/j.ajmie.20170201.12

Copy | Download

AMA Style

Ibtissem Belgacem, Y. Salhi, E-K. Si-Ahmed. Hydrodynamic Study Using CFD Simulations in a Horizontal Two-Phase Flow Through Sudden Contraction. Am J Mech Ind Eng. 2016;2(1):8-16. doi: 10.11648/j.ajmie.20170201.12

Copy | Download

@article{10.11648/j.ajmie.20170201.12,
  author = {Ibtissem Belgacem and Y. Salhi and E-K. Si-Ahmed},
  title = {Hydrodynamic Study Using CFD Simulations in a Horizontal Two-Phase Flow Through Sudden Contraction},
  journal = {American Journal of Mechanical and Industrial Engineering},
  volume = {2},
  number = {1},
  pages = {8-16},
  doi = {10.11648/j.ajmie.20170201.12},
  url = {https://doi.org/10.11648/j.ajmie.20170201.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmie.20170201.12},
  abstract = {Two-phase flows are encountered in a wide range of industrial application. In the present work, two-phase computational fluid dynamics (CFD) calculations, using Eulerian–Eulerian model and commercial CFD package FLUENT 6.3, were employed to calculate pressure drops caused by abrupt flow area contraction in small circular pipes for two-phase flow of air and water mixtures at room temperature and near atmospheric pressure. The pressure drop is determined by extrapolating the computed pressure profiles upstream and downstream of the contraction. Variables studied include: gas and liquid velocities, and pipe contraction ratio. The numerical results were validated against experimental data from the literature and are found to be in good agreement. Our findings could be useful in designing pipeline.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Hydrodynamic Study Using CFD Simulations in a Horizontal Two-Phase Flow Through Sudden Contraction
AU  - Ibtissem Belgacem
AU  - Y. Salhi
AU  - E-K. Si-Ahmed
Y1  - 2016/12/26
PY  - 2016
N1  - https://doi.org/10.11648/j.ajmie.20170201.12
DO  - 10.11648/j.ajmie.20170201.12
T2  - American Journal of Mechanical and Industrial Engineering
JF  - American Journal of Mechanical and Industrial Engineering
JO  - American Journal of Mechanical and Industrial Engineering
SP  - 8
EP  - 16
PB  - Science Publishing Group
SN  - 2575-6060
UR  - https://doi.org/10.11648/j.ajmie.20170201.12
AB  - Two-phase flows are encountered in a wide range of industrial application. In the present work, two-phase computational fluid dynamics (CFD) calculations, using Eulerian–Eulerian model and commercial CFD package FLUENT 6.3, were employed to calculate pressure drops caused by abrupt flow area contraction in small circular pipes for two-phase flow of air and water mixtures at room temperature and near atmospheric pressure. The pressure drop is determined by extrapolating the computed pressure profiles upstream and downstream of the contraction. Variables studied include: gas and liquid velocities, and pipe contraction ratio. The numerical results were validated against experimental data from the literature and are found to be in good agreement. Our findings could be useful in designing pipeline.
VL  - 2
IS  - 1
ER  -

Copy | Download

Author Information

Ibtissem Belgacem

LMFTA Faculty of Physique, University of Sciences and Technology Houari Boumediene, Algiers, Algeria; Institute of Technology, University Akli Mhend Oulhadj, Bouira, Algeria
Y. Salhi

LMFTA Faculty of Physique, University of Sciences and Technology Houari Boumediene, Algiers, Algeria
E-K. Si-Ahmed

LMFTA Faculty of Physique, University of Sciences and Technology Houari Boumediene, Algiers, Algeria; GEPEA, CNRS UMR-6144 University of Nantes, Nantes, France

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Ibtissem Belgacem, Y. Salhi, E-K. Si-Ahmed. (2016). Hydrodynamic Study Using CFD Simulations in a Horizontal Two-Phase Flow Through Sudden Contraction. American Journal of Mechanical and Industrial Engineering, 2(1), 8-16. https://doi.org/10.11648/j.ajmie.20170201.12

Copy | Download

ACS Style

Ibtissem Belgacem; Y. Salhi; E-K. Si-Ahmed. Hydrodynamic Study Using CFD Simulations in a Horizontal Two-Phase Flow Through Sudden Contraction. Am. J. Mech. Ind. Eng. 2016, 2(1), 8-16. doi: 10.11648/j.ajmie.20170201.12

Copy | Download

AMA Style

Ibtissem Belgacem, Y. Salhi, E-K. Si-Ahmed. Hydrodynamic Study Using CFD Simulations in a Horizontal Two-Phase Flow Through Sudden Contraction. Am J Mech Ind Eng. 2016;2(1):8-16. doi: 10.11648/j.ajmie.20170201.12

Copy | Download

@article{10.11648/j.ajmie.20170201.12,
  author = {Ibtissem Belgacem and Y. Salhi and E-K. Si-Ahmed},
  title = {Hydrodynamic Study Using CFD Simulations in a Horizontal Two-Phase Flow Through Sudden Contraction},
  journal = {American Journal of Mechanical and Industrial Engineering},
  volume = {2},
  number = {1},
  pages = {8-16},
  doi = {10.11648/j.ajmie.20170201.12},
  url = {https://doi.org/10.11648/j.ajmie.20170201.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmie.20170201.12},
  abstract = {Two-phase flows are encountered in a wide range of industrial application. In the present work, two-phase computational fluid dynamics (CFD) calculations, using Eulerian–Eulerian model and commercial CFD package FLUENT 6.3, were employed to calculate pressure drops caused by abrupt flow area contraction in small circular pipes for two-phase flow of air and water mixtures at room temperature and near atmospheric pressure. The pressure drop is determined by extrapolating the computed pressure profiles upstream and downstream of the contraction. Variables studied include: gas and liquid velocities, and pipe contraction ratio. The numerical results were validated against experimental data from the literature and are found to be in good agreement. Our findings could be useful in designing pipeline.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Hydrodynamic Study Using CFD Simulations in a Horizontal Two-Phase Flow Through Sudden Contraction
AU  - Ibtissem Belgacem
AU  - Y. Salhi
AU  - E-K. Si-Ahmed
Y1  - 2016/12/26
PY  - 2016
N1  - https://doi.org/10.11648/j.ajmie.20170201.12
DO  - 10.11648/j.ajmie.20170201.12
T2  - American Journal of Mechanical and Industrial Engineering
JF  - American Journal of Mechanical and Industrial Engineering
JO  - American Journal of Mechanical and Industrial Engineering
SP  - 8
EP  - 16
PB  - Science Publishing Group
SN  - 2575-6060
UR  - https://doi.org/10.11648/j.ajmie.20170201.12
AB  - Two-phase flows are encountered in a wide range of industrial application. In the present work, two-phase computational fluid dynamics (CFD) calculations, using Eulerian–Eulerian model and commercial CFD package FLUENT 6.3, were employed to calculate pressure drops caused by abrupt flow area contraction in small circular pipes for two-phase flow of air and water mixtures at room temperature and near atmospheric pressure. The pressure drop is determined by extrapolating the computed pressure profiles upstream and downstream of the contraction. Variables studied include: gas and liquid velocities, and pipe contraction ratio. The numerical results were validated against experimental data from the literature and are found to be in good agreement. Our findings could be useful in designing pipeline.
VL  - 2
IS  - 1
ER  -

Copy | Download