Volume 1, Issue 1, July 2013, Pages: 8-11
Received: May 29, 2013;
Published: Jul. 10, 2013
Views 3361 Downloads 205
Krishna Kumar, Department of Chemical Engineering, KIOT, Wollo University, Ethiopia
Omprakash Sahu, Department of Chemical Engineering, KIOT, Wollo University, Ethiopia
The aim of study was designed to investigate removal of dye (reactive scarlet) by electrocoagulation using tubular iron electrodes. Experiments were conducted to examine the effects of the operating parameters, such as pH, current density and flow rate on dye and COD removal in the electrocoagulation process. The energy consumptions were also analyzed. COD of the wastewater was reduced from 620.4 to 21.5 mg/L with the removal efficiency of 96.5 % at the current density of 30 mA/cm2, supporting electrolyte concentration of 0.1 M Na2SO4, and flow rate of 200 mL/min. The high dye removal efficiencies were obtained at all experiments. The initial dye concentration of 200 mg/L was reduced to 1.08 mg/L with the removal efficiency of 99.4 % at 30mA/cm2 after 90 min electrocoagulation.
Removal of Dye by Electrocoagulation Method, Hydrology.
Vol. 1, No. 1,
2013, pp. 8-11.
Zodi, S., Potier O., Lapicque, F., Leclerc, J. L., Treatment of The Textile Wastewaters by Electrocoagulation: Effect of Operating Parameters on the Sludge Settling Characteristics, Separation and Purification Technology, Vol. 69, 2009, pp 29 –36.
Hernández, I. L., Díaz, C. B., Morales, G. R., Bilyeu, B., Ureǹa-Núǹez, F., Influence of the Anodic Material on Electrocoagulation Performance, Chemical Engineering Journal, Vol. 148, 2009, pp 97–105.
Kashefialasl, M., Khosravi, M., Marandi, R., Seyyedi, K., Treatment of Dye Solution Containing Colored Index Acid Yellow 36 by Electrocoagulation Using Iron Electrodes, Int. J. Environ. Sci. Tech., Vol. 2, 2006, pp 365-371.
Alinsafi, A., Khemis, M., Pons, M. N., Leclerc, J.P., Yaacoubi, A., Benhammou, A., Nejmeddine, A., Electro-coagulation of reactive textile dyes and textile wastewater, Chemical Engineering and Processing, Vol. 44, 2005, pp 461–470.
Phalakornkule, C., Polgumhang, S., Tongdaung, W., Karakat, B., Nuyut, T., Electrocoagulation of Blue Reactive, Red Disperse and Mixed Dyes, and Application in Treating Textile Effluent, Journal of Environmental Management, Vol. 91, 2010, pp 918–926.
Trompette, J.L., Vergnes, H., Coufort, C., Enhanced Electrocoagulation Efficiency of Lyophobic Colloids In the Presence of Ammonium Electrolytes, Colloids and Surfaces A: Physicochem. Eng. Aspects,Vol. 315, 2008, pp 66–73.
Moreno-Casillas, H. A., Cocke, D. L., Gomes, J. A. G., Morkovsky, P., Parga J.R., Peterson, E., Electrocoagulation Mechanism For COD Removal, Separation and Purification Technology, Vol. 56, 2007, pp 204–211.
Kabdaşlı, İ., Vardar, B., Arslan-Alaton, İ., Tunay, O., Effect of Dye Auxiliaries on Color and COD Removal From Simulated Reactive Dyebath Effluent by Electrocoagulation, Chemical Engineering Journal, Vol. 148, 2009,pp 89–96.
Ün, Ü.T., Koparal A.S., Öğütveren Ü.B., Hybrid Processes for the Treatment of Cattle-Slaugterhouse Wastewater Using Aluminum and Iron Electrodes, Journal of Hazardous Materials, Vol. 164, 2009, pp 580 – 586.
Feng, J. W., Sun, Y. B., Zheng, Z., Zhang, J. B., Li, S., Tian, Y. C., "Treatment of Tannery Wastewater by Electrocoagulation", Journal of Environmental Sciences, Vol 19, 2007, pp 1409 – 1415.
Kobya, M., Demirbaş, E., Dedeli, A., Şensoy, M.T., "Treatment of Rinse Water From Zinc Phosphate Coating by Batch and Continuous Electrocoagulation Processes", Journal of Hazardous Materials, Vol. 173, 2010, pp 326–334.
Turkish Directive on Water Pollution Control, Table 10: Discharge Standards of Textile Industry Wastewaters, 31 December, 2004.