| Peer-Reviewed

The Design of the Natural Gas Dehydration Tower

Received: 5 November 2016    Accepted: 22 December 2016    Published: 28 January 2017
Views:       Downloads:
Abstract

Due to water is contained in the natural gas, also some other substance can form into hydrate in some special conditions. Above zero degree natural gas is a solid-state unstable compound. It can not only bring about the blockage of the pipe, but also cause the blockage of the spray nozzle and the separation equipment. So we use method of absorption to dehydrate. In this method we use triethylene glycol (TEG) as a sorbent. Because the TEG has a strong dehydrated capability of natural gas, and also TEG is quiet stable under high temperature, so TEG can not be solidified, at the same time TEG is easy to be regenerated. During the process of carrying, the losing amount of TEG is acceptable, and the dew point is high. All the property decide the TEG is suit for dehydrate. The absorbtion tower have many advantages. First, it is easy made and investment is low and pressure can be maintained long enough so that it can save power. Second, it can be used continuously. Third, the volume of tower is easy to be expanded. forth, the equipment of the tower is easy to be assembled so that it can lower the complexity of construction. Finally, it is convenient to avoid the pollution of solid adsorbent. In this method, the working theory of the dehydration tower is briefly stated. The paper not only make an reasonable choose of the parts of absorbtion tower, but also check the stress on the body of the absorbtion tower. What’s more, the way to reinforce the holes of the tower and technical demands of the tower are also explained in the paper.

Published in International Journal of Oil, Gas and Coal Engineering (Volume 4, Issue 6)
DOI 10.11648/j.ogce.20160406.13
Page(s) 66-69
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Natural Gas Dehydration, TEG, TEG Dehydration, Dehydration Tower

References
[1] Zhang Lianghe. Natural gas gathering and transportation engineering. Petroleum Industry Press.
[2] Campbell.. pretreatment and processing of natural gas (second volume).
[3] Campbell.. pretreatment and processing of natural gas (third volume).
[4] Principles and technologies of natural gas processing. Heilongjiang science and Technology Publishing House.
[5] Nie Qingde. Equipment design. Chemical Industry Press.
[6] Zhao Zhengxiu. Design of petrochemical pressure vessels. The press of the University of petroleum.
[7] Wang Zhiwen. Chemical container design. Second ed. Chemical Industry Press.
[8] Guo Pengou. Foundation of pressure vessel technology. Northwestern University press.
[9] Zeng Qi, Zhang Yufang. Natural gas gathering and transportation. Southwest Petroleum Institute.
[10] The structure of chemical equipment. The atlas design technology center of Ministry of chemical industry equipment.
[11] Li Yun, Zhu Lin, Mu Shuguang, Wang Zhihong. Ground engineering of natural gas. Petroleum Industry Press.
Cite This Article
  • APA Style

    Qingyue Gu, Chunjing Liu. (2017). The Design of the Natural Gas Dehydration Tower. International Journal of Oil, Gas and Coal Engineering, 4(6), 66-69. https://doi.org/10.11648/j.ogce.20160406.13

    Copy | Download

    ACS Style

    Qingyue Gu; Chunjing Liu. The Design of the Natural Gas Dehydration Tower. Int. J. Oil Gas Coal Eng. 2017, 4(6), 66-69. doi: 10.11648/j.ogce.20160406.13

    Copy | Download

    AMA Style

    Qingyue Gu, Chunjing Liu. The Design of the Natural Gas Dehydration Tower. Int J Oil Gas Coal Eng. 2017;4(6):66-69. doi: 10.11648/j.ogce.20160406.13

    Copy | Download

  • @article{10.11648/j.ogce.20160406.13,
      author = {Qingyue Gu and Chunjing Liu},
      title = {The Design of the Natural Gas Dehydration Tower},
      journal = {International Journal of Oil, Gas and Coal Engineering},
      volume = {4},
      number = {6},
      pages = {66-69},
      doi = {10.11648/j.ogce.20160406.13},
      url = {https://doi.org/10.11648/j.ogce.20160406.13},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ogce.20160406.13},
      abstract = {Due to water is contained in the natural gas, also some other substance can form into hydrate in some special conditions. Above zero degree natural gas is a solid-state unstable compound. It can not only bring about the blockage of the pipe, but also cause the blockage of the spray nozzle and the separation equipment. So we use method of absorption to dehydrate. In this method we use triethylene glycol (TEG) as a sorbent. Because the TEG has a strong dehydrated capability of natural gas, and also TEG is quiet stable under high temperature, so TEG can not be solidified, at the same time TEG is easy to be regenerated. During the process of carrying, the losing amount of TEG is acceptable, and the dew point is high. All the property decide the TEG is suit for dehydrate. The absorbtion tower have many advantages. First, it is easy made and investment is low and pressure can be maintained long enough so that it can save power. Second, it can be used continuously. Third, the volume of tower is easy to be expanded. forth, the equipment of the tower is easy to be assembled so that it can lower the complexity of construction. Finally, it is convenient to avoid the pollution of solid adsorbent. In this method, the working theory of the dehydration tower is briefly stated. The paper not only make an reasonable choose of the parts of absorbtion tower, but also check the stress on the body of the absorbtion tower. What’s more, the way to reinforce the holes of the tower and technical demands of the tower are also explained in the paper.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - The Design of the Natural Gas Dehydration Tower
    AU  - Qingyue Gu
    AU  - Chunjing Liu
    Y1  - 2017/01/28
    PY  - 2017
    N1  - https://doi.org/10.11648/j.ogce.20160406.13
    DO  - 10.11648/j.ogce.20160406.13
    T2  - International Journal of Oil, Gas and Coal Engineering
    JF  - International Journal of Oil, Gas and Coal Engineering
    JO  - International Journal of Oil, Gas and Coal Engineering
    SP  - 66
    EP  - 69
    PB  - Science Publishing Group
    SN  - 2376-7677
    UR  - https://doi.org/10.11648/j.ogce.20160406.13
    AB  - Due to water is contained in the natural gas, also some other substance can form into hydrate in some special conditions. Above zero degree natural gas is a solid-state unstable compound. It can not only bring about the blockage of the pipe, but also cause the blockage of the spray nozzle and the separation equipment. So we use method of absorption to dehydrate. In this method we use triethylene glycol (TEG) as a sorbent. Because the TEG has a strong dehydrated capability of natural gas, and also TEG is quiet stable under high temperature, so TEG can not be solidified, at the same time TEG is easy to be regenerated. During the process of carrying, the losing amount of TEG is acceptable, and the dew point is high. All the property decide the TEG is suit for dehydrate. The absorbtion tower have many advantages. First, it is easy made and investment is low and pressure can be maintained long enough so that it can save power. Second, it can be used continuously. Third, the volume of tower is easy to be expanded. forth, the equipment of the tower is easy to be assembled so that it can lower the complexity of construction. Finally, it is convenient to avoid the pollution of solid adsorbent. In this method, the working theory of the dehydration tower is briefly stated. The paper not only make an reasonable choose of the parts of absorbtion tower, but also check the stress on the body of the absorbtion tower. What’s more, the way to reinforce the holes of the tower and technical demands of the tower are also explained in the paper.
    VL  - 4
    IS  - 6
    ER  - 

    Copy | Download

Author Information
  • Project Management Department of China Petroleum Engineering & Construction Corp, Beijing, China

  • Project Management Department of China Petroleum Engineering & Construction Corp, Beijing, China

  • Sections