Performance Appraisal of a Gamma-Type Stirling Engine

Kwasi-Effah C. C.; Obanor A. I.; Aisien F. A.; Ogbeide O. O.

doi:doi:10.11648/j.ogce.20170504.13

| Peer-Reviewed

Performance Appraisal of a Gamma-Type Stirling Engine

Kwasi-Effah C. C., Obanor A. I., Aisien F. A., Ogbeide O. O.

Published in International Journal of Oil, Gas and Coal Engineering (Volume 5, Issue 4)

Received: 3 February 2017 Accepted: 3 March 2017 Published: 23 October 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The demand for energy is expanding due to increase in population and fast industrialization which started in the 20th century. As domestic and industrial systems make use of the accessible energy produced by energy systems, technological headway is critical for these systems to maximally use the accessible energy sources available in the world. Thus, interest in Stirling engine technology is growing once again. This paper utilizes a third order quasi-steady flow model to predict the performance of an experimental gamma type Stirling engine at the heater temperature of 1145K by simulating in MATLAB environment. A prediction error of 8.24% was obtained after comparing simulated performance with the experimental values. Empirical methods such as Beale and West analysis were also used to predict the performance of the Stirling engine. The quasi-steady flow model showed better accuracy when compared to other methods such as Beal and West analysis.

Published in	International Journal of Oil, Gas and Coal Engineering (Volume 5, Issue 4)
DOI	10.11648/j.ogce.20170504.13
Page(s)	51-53
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Experimental Engine, Gamma Type, Modeling, Simulation, Stirling Engine

References

[1]	Blank, F. A., (2011). Power optimized work for reciprocating internally reversible Stirling-like heat engine cycles with regeneration and linear external heat transfer. Journal of Applied Physics, 84 (5): 238-292.
[2]	Chen, N. C. and Griffin, F. P., (1983). A review of Stirling engine mathematical models. Technical Report. Report No ORNL/CON 135, OAK Ridge National Laboratory, Tennessee.
[3]	Dixit, D. K, Ghodke, SV (2012). Renewable energy powered Stirling engines—a viable energy alternative. In: Sayigh AAM, editor. Renewable energy technology and the environment. Proceedings of the second world renewable energy congress, 2: 934–8.
[4]	Formosa, F. and Despesse, G., (2010). Analytical model for Stirling cycle machine design. Energy Conversion and Management, 51: 1855-1863.
[5]	Gheith, R., Aloui F. and Ben S. N., (2012). Study of the regenerator constituting material influence on a gamma type Stirling engine. Journal of Mechanical Science and Technology, 26 (4): 1251–1255.
[6]	Toda, F. S., Iwamoto, K. and Nagajima, N., (2007). Development of low-temperature difference Stirling engine behavior of the mechanism effectiveness for the performance prediction method. Proceeding of 13th international Stirling engine conference, Tokyo.
[7]	Kolin, I., (2001). Ideal Stirling cycle in Alpha, Beta and Gamma engine. Proceedings of the 10th Stirling engine conference 24th – 26th September, Osnabruck, Germany.
[8]	Roy, C. and Tew, J. R., (1983): Computer program for Stirling engine performance calculations. DOE/NASA/51040-42 NASA TM-82960.
[9]	Hsu, S. T. Lin F. Y. and Chiou, J. S., (2013). Heat-transfer aspects of Stirling power generation using incinerator waste energy. Journal of Renewable Energy, 28: 59-69.
[10]	Kim, S. Y., (2006): Specific power estimations for free-piston Stirling engines. 4th International Energy Conversion Engineering Conference and Exhibit, San Diego: 80-19.

Cite This Article

Plain Text BibTeX RIS

APA Style

Kwasi-Effah C. C., Obanor A. I., Aisien F. A., Ogbeide O. O. (2017). Performance Appraisal of a Gamma-Type Stirling Engine. International Journal of Oil, Gas and Coal Engineering, 5(4), 51-53. https://doi.org/10.11648/j.ogce.20170504.13

Copy | Download

ACS Style

Kwasi-Effah C. C.; Obanor A. I.; Aisien F. A.; Ogbeide O. O. Performance Appraisal of a Gamma-Type Stirling Engine. Int. J. Oil Gas Coal Eng. 2017, 5(4), 51-53. doi: 10.11648/j.ogce.20170504.13

Copy | Download

AMA Style

Kwasi-Effah C. C., Obanor A. I., Aisien F. A., Ogbeide O. O. Performance Appraisal of a Gamma-Type Stirling Engine. Int J Oil Gas Coal Eng. 2017;5(4):51-53. doi: 10.11648/j.ogce.20170504.13

Copy | Download

@article{10.11648/j.ogce.20170504.13,
  author = {Kwasi-Effah C. C. and Obanor A. I. and Aisien F. A. and Ogbeide O. O.},
  title = {Performance Appraisal of a Gamma-Type Stirling Engine},
  journal = {International Journal of Oil, Gas and Coal Engineering},
  volume = {5},
  number = {4},
  pages = {51-53},
  doi = {10.11648/j.ogce.20170504.13},
  url = {https://doi.org/10.11648/j.ogce.20170504.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ogce.20170504.13},
  abstract = {The demand for energy is expanding due to increase in population and fast industrialization which started in the 20th century. As domestic and industrial systems make use of the accessible energy produced by energy systems, technological headway is critical for these systems to maximally use the accessible energy sources available in the world. Thus, interest in Stirling engine technology is growing once again. This paper utilizes a third order quasi-steady flow model to predict the performance of an experimental gamma type Stirling engine at the heater temperature of 1145K by simulating in MATLAB environment. A prediction error of 8.24% was obtained after comparing simulated performance with the experimental values. Empirical methods such as Beale and West analysis were also used to predict the performance of the Stirling engine. The quasi-steady flow model showed better accuracy when compared to other methods such as Beal and West analysis.},
 year = {2017}
}

Copy | Download

TY - JOUR
T1 - Performance Appraisal of a Gamma-Type Stirling Engine
AU - Kwasi-Effah C. C.
AU - Obanor A. I.
AU - Aisien F. A.
AU - Ogbeide O. O.
Y1 - 2017/10/23
PY - 2017
N1 - https://doi.org/10.11648/j.ogce.20170504.13
DO - 10.11648/j.ogce.20170504.13
T2 - International Journal of Oil, Gas and Coal Engineering
JF - International Journal of Oil, Gas and Coal Engineering
JO - International Journal of Oil, Gas and Coal Engineering
SP - 51
EP - 53
PB - Science Publishing Group
SN - 2376-7677
UR - https://doi.org/10.11648/j.ogce.20170504.13
AB - The demand for energy is expanding due to increase in population and fast industrialization which started in the 20th century. As domestic and industrial systems make use of the accessible energy produced by energy systems, technological headway is critical for these systems to maximally use the accessible energy sources available in the world. Thus, interest in Stirling engine technology is growing once again. This paper utilizes a third order quasi-steady flow model to predict the performance of an experimental gamma type Stirling engine at the heater temperature of 1145K by simulating in MATLAB environment. A prediction error of 8.24% was obtained after comparing simulated performance with the experimental values. Empirical methods such as Beale and West analysis were also used to predict the performance of the Stirling engine. The quasi-steady flow model showed better accuracy when compared to other methods such as Beal and West analysis.
VL - 5
IS - 4
ER -

Copy | Download

Author Information

Kwasi-Effah C. C.

Department of Mechanical Engineering, University of Benin, Benin City, Nigeria
Obanor A. I.

Department of Mechanical Engineering, University of Benin, Benin City, Nigeria
Aisien F. A.

Department of Mechanical Engineering, University of Benin, Benin City, Nigeria
Ogbeide O. O.

Department of Production Engineering, University of Benin, Benin City, Nigeria

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Kwasi-Effah C. C., Obanor A. I., Aisien F. A., Ogbeide O. O. (2017). Performance Appraisal of a Gamma-Type Stirling Engine. International Journal of Oil, Gas and Coal Engineering, 5(4), 51-53. https://doi.org/10.11648/j.ogce.20170504.13

Copy | Download

ACS Style

Kwasi-Effah C. C.; Obanor A. I.; Aisien F. A.; Ogbeide O. O. Performance Appraisal of a Gamma-Type Stirling Engine. Int. J. Oil Gas Coal Eng. 2017, 5(4), 51-53. doi: 10.11648/j.ogce.20170504.13

Copy | Download

AMA Style

Kwasi-Effah C. C., Obanor A. I., Aisien F. A., Ogbeide O. O. Performance Appraisal of a Gamma-Type Stirling Engine. Int J Oil Gas Coal Eng. 2017;5(4):51-53. doi: 10.11648/j.ogce.20170504.13

Copy | Download

@article{10.11648/j.ogce.20170504.13,
  author = {Kwasi-Effah C. C. and Obanor A. I. and Aisien F. A. and Ogbeide O. O.},
  title = {Performance Appraisal of a Gamma-Type Stirling Engine},
  journal = {International Journal of Oil, Gas and Coal Engineering},
  volume = {5},
  number = {4},
  pages = {51-53},
  doi = {10.11648/j.ogce.20170504.13},
  url = {https://doi.org/10.11648/j.ogce.20170504.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ogce.20170504.13},
  abstract = {The demand for energy is expanding due to increase in population and fast industrialization which started in the 20th century. As domestic and industrial systems make use of the accessible energy produced by energy systems, technological headway is critical for these systems to maximally use the accessible energy sources available in the world. Thus, interest in Stirling engine technology is growing once again. This paper utilizes a third order quasi-steady flow model to predict the performance of an experimental gamma type Stirling engine at the heater temperature of 1145K by simulating in MATLAB environment. A prediction error of 8.24% was obtained after comparing simulated performance with the experimental values. Empirical methods such as Beale and West analysis were also used to predict the performance of the Stirling engine. The quasi-steady flow model showed better accuracy when compared to other methods such as Beal and West analysis.},
 year = {2017}
}

Copy | Download