International Journal of Oil, Gas and Coal Engineering

| Peer-Reviewed |

Application of Dynamic Multi-stage Temporary Plugging Fracturing Technology in Directional Wells

Received: 25 July 2019    Accepted: 26 August 2019    Published: 17 September 2019
Views:       Downloads:

Share This Article

Abstract

At present, the mainstream technology for the stimulation of tight reservoir which exists a large number of interlayer is "perforation concentrated & large-scale fracturing". But the fracture simulation and monitoring result indicates that the vertical zone of the reservoir actually isn't stimulated fully. To increase the degree of the reservoir stimulated, the stimulation mechanism of dynamic multistage temporary plugging fracturing, temporary plugging agent and technological parameter have been studied. By optimizing the combination of temporary plugging materials, dosage, construction parameters and adding speed, the temporary plugging material has stable performance, has played a good role in temporary plugging and boosting pressure in field tests. The critical technique which is characterized by "multi-cluster perforation, temporary plugging near wellbore and multistage fracturing" is developed, and the design concept of dynamic multi-stage temporary plugging fracturing pump injection is defined. The production of the test well is twice as the neighboring well, in addition, it can realize multistage fracturing in single operation to decrease the fracturing cost, which makes the technique a promising future.

DOI 10.11648/j.ogce.20190704.11
Published in International Journal of Oil, Gas and Coal Engineering (Volume 7, Issue 4, July 2019)
Page(s) 89-94
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Tight Reservoir, Temporary Plugging, Multi-stage Fracturing, Perforation Concentrated, Appraisal Well

References
[1] Xie Xinqiu, Zou Hongjiang, Wulong. Research and application of temporary plugging fracturing in low permeability oilfields [J]. Drilling and production technology, 2017, 40 (3): 65-67.
[2] Hu Jingtao. Research on technology of temporary plugging and volume transformation of tight reservoir [D]. Sichuan: Southwest Petroleum University, 2015.
[3] Dai Junhua, etc. Research and application of temporary plugging fracturing technology in Pingbei oilfield [J]. Drilling and production technology, 2006, 29 (6): 67-69.
[4] Wang Xiaoyu. Research and field application of water-soluble temporary plugging agent for fracturing [J]. Petrochemical application, 2015, 34 (6): 92-94.
[5] Su Liangyin, Pang Peng, Da Yinpeng. The dosage optimization of temporary plugging repetitive fracturing agent and field test in low permeability oilfield [J]. Fault block oil and gas field, 2014, 21 (1): 114-117.
[6] Luo Hongyu, Fulton D D. Degradable Diverting Agents andAssociated Methods [P]. US: 8109335, 2012-02-07.
[7] Surjaatmadja J B, Todd B L. Fracturing Fluids ComprisingDegradable Diverting Agents and Methods of Use in Subter-ranean Formations [P]. US: 7506689, 2009-05-24.
[8] Warpinski N R, Teufel L W. Influence of geologic discontinuities on hydraulic fracture propagation [J]. Journal ofPetroleum Technology, 1987, 39 (2): 209-220.
[9] Blanton T L. Propagation of hydraulically and dynamicallyinduced fractures in naturally fractured reservoirs [R]. Louisville: SPE 15261, 1986: 1-15.
[10] Wang Zaiyu, Wei Xing, Feng Tian. Temporary Blocking Fracture Turning Research in Ansai Oilfield [J]. Liaoning Chemical Industry, 2014 (05): 587-588.
[11] Wang Ninfeng, Fu Zhenyin, Ren Yanpeng, et al. Application of multi-fracture fracturing technology in ultra-low permeability reservoirs [J]. Drilling and production technology, 2010, 33 (S1): 41-44.
[12] Yin Xiaohong, Zhou Zongqiang, Li Xianwen, et al. A temporary plugging agent for horizontal well fracturing and its preparation method [P]. China Patent: 2010134590.9, 2011-09-28.
[13] Zhou Fayuan, Pu Wanfen, Liu Chunzhi, et al. Developmentof temporary plugging agent for turning repeated fracturing.[J] Drilling and production technology, 2010, 33 (5): 111-113.
[14] Jiang Biwu, Mu Lijun. Performance of wax ball temporary plugging agent in repeated fracturing in low permeability oilfields [J]. Drilling and production technology, 2006, 29 (6): 114-116.
[15] Zang Haihong. Water-soluble fracturing acidizing temporary plugging agent [P]. Chinese patent: 200410009408.1, 2005-03-23.
[16] Zhang Jun, Wang Jianjun, Wen Yinwu, et al. Temporary Fracture Blocking Agent for Oil and Gas Reservoirs [P]. China Patent: 200710049168.1, 2008-11-26.
Author Information
  • Oil & Gas Technology Research Institute of Changqing Oilfield Co., Xi'an, China; Development of Low-Permeability Oil & Gas Fields, National Engineering Laboratory for Exploration, Xi'an, China

  • Oil & Gas Technology Research Institute of Changqing Oilfield Co., Xi'an, China; Development of Low-Permeability Oil & Gas Fields, National Engineering Laboratory for Exploration, Xi'an, China

  • Oil & Gas Technology Research Institute of Changqing Oilfield Co., Xi'an, China; Development of Low-Permeability Oil & Gas Fields, National Engineering Laboratory for Exploration, Xi'an, China

  • Oil & Gas Technology Research Institute of Changqing Oilfield Co., Xi'an, China; Development of Low-Permeability Oil & Gas Fields, National Engineering Laboratory for Exploration, Xi'an, China

  • Oil & Gas Technology Research Institute of Changqing Oilfield Co., Xi'an, China; Development of Low-Permeability Oil & Gas Fields, National Engineering Laboratory for Exploration, Xi'an, China

  • Oil & Gas Technology Research Institute of Changqing Oilfield Co., Xi'an, China; Development of Low-Permeability Oil & Gas Fields, National Engineering Laboratory for Exploration, Xi'an, China

Cite This Article
  • APA Style

    Wang Jianhui, Yin Guiqin, Deng Xian’an, Li Xiaoyan, Chen Qiang, et al. (2019). Application of Dynamic Multi-stage Temporary Plugging Fracturing Technology in Directional Wells. International Journal of Oil, Gas and Coal Engineering, 7(4), 89-94. https://doi.org/10.11648/j.ogce.20190704.11

    Copy | Download

    ACS Style

    Wang Jianhui; Yin Guiqin; Deng Xian’an; Li Xiaoyan; Chen Qiang, et al. Application of Dynamic Multi-stage Temporary Plugging Fracturing Technology in Directional Wells. Int. J. Oil Gas Coal Eng. 2019, 7(4), 89-94. doi: 10.11648/j.ogce.20190704.11

    Copy | Download

    AMA Style

    Wang Jianhui, Yin Guiqin, Deng Xian’an, Li Xiaoyan, Chen Qiang, et al. Application of Dynamic Multi-stage Temporary Plugging Fracturing Technology in Directional Wells. Int J Oil Gas Coal Eng. 2019;7(4):89-94. doi: 10.11648/j.ogce.20190704.11

    Copy | Download

  • @article{10.11648/j.ogce.20190704.11,
      author = {Wang Jianhui and Yin Guiqin and Deng Xian’an and Li Xiaoyan and Chen Qiang and Xiang Kui},
      title = {Application of Dynamic Multi-stage Temporary Plugging Fracturing Technology in Directional Wells},
      journal = {International Journal of Oil, Gas and Coal Engineering},
      volume = {7},
      number = {4},
      pages = {89-94},
      doi = {10.11648/j.ogce.20190704.11},
      url = {https://doi.org/10.11648/j.ogce.20190704.11},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ogce.20190704.11},
      abstract = {At present, the mainstream technology for the stimulation of tight reservoir which exists a large number of interlayer is "perforation concentrated & large-scale fracturing". But the fracture simulation and monitoring result indicates that the vertical zone of the reservoir actually isn't stimulated fully. To increase the degree of the reservoir stimulated, the stimulation mechanism of dynamic multistage temporary plugging fracturing, temporary plugging agent and technological parameter have been studied. By optimizing the combination of temporary plugging materials, dosage, construction parameters and adding speed, the temporary plugging material has stable performance, has played a good role in temporary plugging and boosting pressure in field tests. The critical technique which is characterized by "multi-cluster perforation, temporary plugging near wellbore and multistage fracturing" is developed, and the design concept of dynamic multi-stage temporary plugging fracturing pump injection is defined. The production of the test well is twice as the neighboring well, in addition, it can realize multistage fracturing in single operation to decrease the fracturing cost, which makes the technique a promising future.},
     year = {2019}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Application of Dynamic Multi-stage Temporary Plugging Fracturing Technology in Directional Wells
    AU  - Wang Jianhui
    AU  - Yin Guiqin
    AU  - Deng Xian’an
    AU  - Li Xiaoyan
    AU  - Chen Qiang
    AU  - Xiang Kui
    Y1  - 2019/09/17
    PY  - 2019
    N1  - https://doi.org/10.11648/j.ogce.20190704.11
    DO  - 10.11648/j.ogce.20190704.11
    T2  - International Journal of Oil, Gas and Coal Engineering
    JF  - International Journal of Oil, Gas and Coal Engineering
    JO  - International Journal of Oil, Gas and Coal Engineering
    SP  - 89
    EP  - 94
    PB  - Science Publishing Group
    SN  - 2376-7677
    UR  - https://doi.org/10.11648/j.ogce.20190704.11
    AB  - At present, the mainstream technology for the stimulation of tight reservoir which exists a large number of interlayer is "perforation concentrated & large-scale fracturing". But the fracture simulation and monitoring result indicates that the vertical zone of the reservoir actually isn't stimulated fully. To increase the degree of the reservoir stimulated, the stimulation mechanism of dynamic multistage temporary plugging fracturing, temporary plugging agent and technological parameter have been studied. By optimizing the combination of temporary plugging materials, dosage, construction parameters and adding speed, the temporary plugging material has stable performance, has played a good role in temporary plugging and boosting pressure in field tests. The critical technique which is characterized by "multi-cluster perforation, temporary plugging near wellbore and multistage fracturing" is developed, and the design concept of dynamic multi-stage temporary plugging fracturing pump injection is defined. The production of the test well is twice as the neighboring well, in addition, it can realize multistage fracturing in single operation to decrease the fracturing cost, which makes the technique a promising future.
    VL  - 7
    IS  - 4
    ER  - 

    Copy | Download

  • Sections